Band Resaws For Sale

SALEM 62" Linebar Resaw complete with 125 HP motor and drive, roller infeed with slab turners; linebar section with two press roll arms operated by SILVATECH linear cylinder with setworks; resaw is weight strain type-older machine but in good condition, electric screw for raising and lowering guide; outfeed with transfer; cross-transfer with slab dump; return roller conveyor; 3 strand transfer back to infeed. Machine has been setting in present location approximately 6 years. SYSTEM MUST BE REMOVED FROM PRESENT LOCATION.

Offbear belt, wheels and hood included. - Call Jeff for more info at 574-370-5050

KENT - Single Head, ResawSpecifications: -- 15 HP Motor. -- Blade size: 168"; x 1"; x 0.035"; 2TPI. -- 6" Wide feed belt. -- Operational working heights: 1/4" minimum cut to 8"; maximum. -- Feed speed: 20 - 150 Feet per minute.

Like new 36" vertical linebar resaw. COMPLETE WITH RUN AROUND SYSTEM. Saws 14"W x 16"H x 12'L cants (can be extended). Operator's cab w/ controls. Elec. sys. w/ starters, prewired mach. Pre-plumbed hyd. sys. 20HP hpu, sub-steel, ten saws incl. Mach. disassembled. Crane additional. $90,000. OBO

Manufactured by the Morgan Family that brought you the Original Low Profile Band Resaw. Available with or without a return. Hands free return eliminates one operator, saving you on labor.Three phase or single phase electric, gas or line shaft models available.Other models available are single, two, or four head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available.

Manufactured by the Morgan family that brought you the original low profile band is the Wide Cut Resaw. Some available options include hands free return, multiple heads or a line shaft for the customer to supply power. It has 29" diameter solid steel band wheels, a 1-1/2" wide band and a 30 hp motor on a cutting head. The hold down wheels and feed conveyor are powered by a 5 hp hydralic unit. Cutting capacity is 14" wide with a ridged 12" wide UHMW covered infeed conveyor. There is a 1/2" - 6" adjusatble cutting depth capacity and virtually unlimited cant height restrictions.

Manufactured by the Morgan Family that brought you the Original Low Profile Band. Available with or without a return. Hands free return eliminates one operator, saving you on labor. Standard 72" return length . Three phase or single phase electric, gas or line shaft models available. Has two quick sets for conveyor height. Other models available are two, three or four head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available.

Manufactured by the Morgan Family that brought you the Original Low Profile Band. Available with or without a return. Hands free return eliminates one operator, saving you on labor. Standard 72" return length . Three phase or single phase electric, gas or line shaft models available. Has two quick sets for conveyor height. Other models available are two, three or four head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available.

Manufactured by the Morgan Family that brought you the Original Low Profile Band. Available with or without a return. Hands free return eliminates one operator, saving you on labor.Three phase or single phase electric, gas or line shaft models available.Other models available are single, two, or three head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available. The video shows two four head band resaws and a board deduster all in line.

SMW Horizontal Single Head Band Resaw w/Maximum Cutting Width 16", Maximum Cutting Thickness 4.5", Maximum Processing Thickness 8", Saw Wheel Diameter 24" and 20HP Motor

New 2024 Sawmill World Horizontal Band Resaw 18" x 18" Cap w/2.25" Band

Morgan Unscrambler - Hydraulic Drive Cant Chop Saw - 20" Blades, 6"x9" Capacity, 10 HP Motor, Pneumatic Cycle, Fixed Stop Smith Resaw - 15 HP Motor, 13'2" x 1.25" Bands, variable feed speed - MISSING drive motor and gearbox for the feed belt. Includes: Powered infeed conveyor leading to the resaw with VFD. Machine required 480v/3Ph for saws, 240v/1Ph for VFD units and controls. All control contacts are contained in a single box. All wires were labeled upon removal.

STENNER ST-9 Vertical ResawSpecifications: 36" Wheel dia., 20 HP TEFC motor w/STAR-DELTA starter, V-belt drive to bottom saw pulley for 7,000 FPM blade speed, 4" max. band width (17'8" long), 14" max. cutting height (table top to guide); feed-works for dimension. -- Features: -- Center splitting and off-center equalizing cutting, (4) serrated feed rolls for speeds from 25 to 100 FPM, 9" max. opening to right & left of blade - 18" total. -- Includes: -- Right-hand fence with steel idle rollers tilts 45°; foot operated brake and feed disengage, manual adjustment of feed roll setting & top guide.

Stenner Resaw VHJ Size 105 S/N 8700

Stenner VHC Resaw Accepting offers

Stetson Ross Kerf Saver Resaw Recrowned band wheels New starter Work ready Only gets used a few times a year and no longer need it

Turner Machinery Company Resaw Good Condition

Tyler Kerfsaver XL Resaw 1-1/4" Blades 36" Diameter Bandwheels Includes: Feed system that can tilt to mill tapered siding

Horizontal Bandsaw System, 2-Head, 4-Top Hold Down Rolls, Toshiba VFD

54" Line Bar Resaw