Sawmill Equipment For Sale

MLS Number 11948224 Edmiston Gang Saw Edger Package Completely rebuilt Edmiston gang saw edger Can accommodate cants up to 4" tall and 8" wide Heavy duty infeed and outfeed rollers New mandrel and roller bearings installed in Fall 2022 ($14,500) Comes with extra mandrel and bearings Four sets of strobe blades with spacers Currently running on PTO power unit Includes Westinghouse 100 HP 3 PH 575V motor and starter for electric set up 12" dust blower with 20 HP 3 PH 240V motor Includes ductwork, steel pole, steel cyclone/switch valve tower Can blow into trailer or drop in dumpster Videos available

Complete Edmiston Sawmill Set Up, Including: Frick Edger, Log Decks w/ Stop & Load, (2) Deutz Power Units and MORE, $20,000

EDMISTON board edger. Includes: infeed;50 HP electric drive; starter; NO OUTFEED. Price $7,900.

Complete EDMISTON mill. Mill ran in March 2024. Includes: 3 strand log deck with top/loader; chain log turner; 4 headblock mill with track / frame / cab and control panel; chipper slab belt; dead rolls; 48" Precision chipper, blow pipe, and electrical (needs work before running); All electrical panels; spare saw blades. MUST BE REMOVED BY END OF AUGUST. Price includes all components $19,900.00

Edmiston 4 Head Block Circular Sawmill Running daily Won't be available until April

4" x 30" wide capacity, 2 movable blades, includes BRAND NEW ARBOR, very good condition

3 strand green chain, 9'6" wide x 40' long, C-55 rooftop chain, good working condition

Edmiston Hydraulic Circle Mill 2 Head Block Carriage , Log Infeed Deck with SNL, , Slab Belt, Log Turner. Available as a Package. Still in Place. Vertical Edger is gone But have others of needed.

Edmiston (4) head block carriage Model 36 w/ track & bumpers w/ Tyrone Berry SMA 225 hydraulic carriage drive & power unit, includes (2) saw hydraulic set vertical edger w/ saws, Silvatech setworks & saw cab - No husk frame... great to run with a band mill or we can find you a husk frame. (Price is loaded on buyer’s truck) (Ref #151) Call Amy Cross for more information. 928-723-9449

Edmiston 48” (4) HB circular sawmill, tong dog, includes chain type log turner, 30 HP hydraulics for carriage & turner, mill cuts up to 24’, includes husk frame w/ top saw, 15’ slab dump conveyor, Tyrone 150 HP shot gun carriage drive (only 4 years old!) w/ Z-Set setworks or can use standard Edmiston setworks, Note: Seller's new mill will need to be onsite before taking this out. Seller will remove. (ref #181) Call Amy for more information (928) 723-9449

The mill is a 56” Edmisten’s that was capable of cutting longer lengths. Up to 34’. The carriage is 20’ long with 5 headblocks.

Edmiston 2 Saw Edger HYD set w/Split Saw & Tailing Belt, includes 40 HP electric motor & substructure

Edmiston Type #2 vertical edger w/ (2) moveable saws w/ 50 HP motor (ref #154) Call Logan 304-641-6640 Call for pictures

7 strands Unscrambler (1 without chain); 81X chain with flights on 30" centers; 7' tall x 7' deep x 15' wide; 5 HP drive. NO pocket so you can create your own.

Dust blower used on Resaw or Edger 550 Volt 3 Phase 1-1/2 HP 3400 RPM

Electro Beauce Motor Control

Electro Beauce Motor Control Center

ELETTROMECCANICA 365710 AUTOTRANSFORMERAuto Transformer Specifications: -- 35 KVA; 220 - 230 V; 60 Hz Primary Transformer to 380 Y+N; 50 Hz secondary.

ELGI EG45-125 Rotary Screw Air Compressor; 60 HP - 267 CFM @ 125 PSIG60 HP Rotary Screw Compressor (Direct Drive); Air-End equipped with "eta-V" profile rotors. Equipped with: -- 4/5 Lobe combination designed to run at optimum speeds; low operating speeds for extended life, low maintenance and a reduced sound level; Intake Valve System with integrated blow down unit, solenoid controls & actuators designed for low losses. -- Optimal Capacity Control results in a direct saving on power consumption; air-oil separation with OSBIC process means oil-free air (1 PPM), per ISO standards and increasing the life of the separator element. -- Features: -- Efficient air cooling system; "Smart" cooling system maintains a lower temperature which increases the motor life, enables easy maintenance and the ducting is completely insulated internally from the other zones. -- Robust, reliable and able to perform at extreme temperatures - from cold to hot and from dry to extreme humid conditions. -- Complete with: -- Performance Control System's user-friendly intuitive backlit display for easy reading; remote monitoring through an RS485 connection; optimal pressure sensors monitor compressor internal pressure differences to optimize compressor maintenance. -- Includes: -- Phase Monitor, Auto Restart; custom designed, centrifugal type moisture separator with an automatic timer control drain which removes over 99% of bulk water from the compressed air.LIFETIME Air-End Warranty.

ELGI EN07-125 10 HP Rotary Screw Compressor; 38 CFM @ 125 PSIG.Equipped with: -- Efficient air filtration system where air enters through a pre-filtered enclosure. -- After cooler is standard on all models to enable high efficiency TEFC, Super E, 10 HP motor operation up to 115°F ambient temperature.Complete with: -- "Neuron" controller that has been custom designed and engineered to monitor and control overall performance. -- Includes service indicators, fault alarms, safety shutdowns and a service / operational log feature for real-time feedback. -- Phase monitor, auto re-start and the ability to hook up to a RS 485 connection to monitor system remotely.Includes: -- 3-Stage efficient air-oil separation (less than 2 PPM). -- Single door access to routine maintenance points. -- Spin-on oil filter and separator elements for fast and easy routine service.6-Year Air End Warranty. - UL/cUL certified to ensure high levels of safety.Mounted on 120-Gal. Horizontal Accumulator Tank w/Drain - $ 11,972