Sawmill Equipment For Sale

Circle Saw Grinder 110V 3 phase

Nielson Circle Saw Grinder #20372 - SN 3007 - 3 phase - 110V - It will grind 24" - possibly 30" - It will do alternate bevel - good condition Call 800-459-2148 for more info.

Nielson Model 800

NORDFAB CLEAN-SWEEP NFP 2A OPEN 5,000 CFM 15 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 460 sq. ft.Equipped with: -- NORDFAB "S040-315-CW" 15 HP - 1,765 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 315 mm (12.40") & Outlet size 9" x 16". -- (32) Approx. 8" Dia. x 6' L "BEANE" media filter bags. -- Trough-style hopper base, with (4) 20" Dia. Discharge openings & Distance from opening to floor 40". -- Galvanized sheet steel frame. -- ABB Control, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

NORDFAB CLEAN-SWEEP NFP 2H OPEN APPROX. 3,600 CFM 10 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 576 sq. ft.Equipped with: -- NORDFAB "S056-250-CW" 10 HP - 3,520 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 315 mm (12.40") & Outlet size 9" x 16". -- (32) Approx. 8" Dia. x 6' L "BEANE" media filter bags. -- Trough-style hopper base, with (4) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ABB Control.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

NORDFAB QUICK-FIT Galvanized Steel Clamp-Together DuctingSpecifications: -- Straights & 90º Elbows in 5"; - 10";, 12";, 14";, 16";, 18";, & 22"; Dia. -- 60º Elbows in 6";, 7";, 10";, 12";, & 14"; Dia. -- 45º Elbows in 5", 6", 8" - 10", 14", 16", & 18" Dia. -- 30º Elbows in 10";, 12";, & 14"; Dia. -- 12.50º Elbows in 10" Dia. -- Manual Shutoff’s in 6";, &’, 10";, & 14"; Dia. -- Reducers in 6"; - 4";, 6"; - 5";, 8"; - 6";, & 10"; - 9";. -- Hose Adapters in 4" - 8", 10", 12", & 14" Dia. -- Clamps in 4" - 10", 12", 14", 16" - 18", 20", & 22".Complete with: -- Dual Rotary Air Lock, with 1.23 HP - 1,710 RPM Motor. -- DISA Rotary Air Lock, with 0.75 kW (1 HP) - 1,700 RPM Motor.NOTE: Other components as pictured. All currently de-Installed as pictured. A complete list is available upon request.

Nordfab Air Blower with 40HP Motor

Northern Automation Lumber Stacker with Lift Table. 3 phase. 36"-192" capacity. #C935

Northtech horizontal band resaw, (2) blades, will cut up to a 12 x 12" cant, powered by (2) 20 HP 460 Volt 3 Phase motors, runs (2) 1 1/4" band blades, Excellent Condition, (new condition with less than 4 hours use). Owner is retiring. Contact Amy (928) 723-9449

Northtech up-cut chop saw, 15 hp electric motor, 24" dia blade, air operated controls, excellent condition

Has (2) Blades Will cut up to a 12 x 12" Powered by (2) 20 HP 460 Volt 3 Phase motors Runs (2) 1 1/4" band blades Excellent Condition, (new condition with less than 4 hours use).

- Close link chain vs. open (no dust or pinch point) - Oiler has twice the number of lube points (critical) - The VS adjustment location on the 14N. - Can cut up to 4 15/16? with 14? blade vs. the MRS-12 12? blade 3-15/16”. - Can run 12? as well on the MRS-14N - Bottom kickback fingers for added safety - Saws, with proper tooling and material, can glue line Specifications: - Main Motor Hp. = 50 Hp. - Voltage/ Freq. = 460 Volt 60Hz - Phase = 3 Phase - Amp Requirement = 35 Amps - Feed Hp. = 2 Speed 1.5 / 3 Hp. - Feed System = Feed Chain - Feed Speed = 25 – 120 FPM - Variable Speed = Variable Speed Pulley - Elevation Hp. = 1/4 Hp. - Elevation Style = Manual Wheel Adjustment - Elevation Sys. = Jack Screw / Linear Guides - Total Hp. = 53.25 Hp. - Electronics = CE Approved Components - Dual Voltage = Elevation Arbor Motors - Control Voltage = 110 Volt - Assisted Start = Wye-Delta - Pass-Line = 33-1/2” - Min. Length = 17-3/4” - Min. Width = 1/2” - Max. Width = 27-1/8” - Min. Thickness = 5/16” - Max. Thickness = 4-15/16” - Arbor Rpm = 3570 Rpm - Blade Size = 12” Tungsten Carbide Tipped - No. of Teeth = 36 Tooth - Blade Kerf = 3.5 mm - Cleaning System = Brush on Chain - Vertical Travel = 3/8” – 5” - Dust Collection = (2) 6” @ 1962 CFM - Arbor Diameter = 70 mm - Hold Down Style = Pressure Plate - Kickback Finger = (2) Top (1) Bottom Sets - Emergency Stop = Push Button - Rear E Stop = Push Button - Safety Feature = Safety Interlock Switch - Guarding = Full Cabinet Enclosure - Oiler = Automatic Mechanical Oiler - Low Oil Warning = Low Oil Shut-off - Fence Type = Adjustable - Fence Dims. = 103” Length - Frame Const. = 5/16” Steel Construction - Worktable Dims. = 27-1/8” x 64” - Infeed Table = 13-3/4” x 103” - Decible Rating = 74 dB - Net Weight = 4402 Lbs. - Gross Weight = 4694 Lbs. - Machine Dims. = 67” x 58” x 71” - Packaging Dims = 72” x 65” x 77”

16 HP 12 filter bags up 4 collection bags lower Lots of pipe

Northtech 12" Resaw Model NT-HBR12V Self contained hydraulic pack

NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln Designed to hold 5,100 bd. ft 4/4 Lumber, or 6,120 bd. ft 8/4 Lumber, Using 3/8" (9 mm) stickers. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max.

(2) Unassembled front load Kilns only System with high HP heat and exhaust designed to hold 8,461 bd/ft (20 cub.m) of 3/4" (25 mm) lumber and 10,475 bd/ft (25 cub.m) of 8/4" (50 mm) lumber (35 cbm). -- Kilns internal dimension: Height 12'3-1/2" (3.75 m), Depth 16' (4.88 m), Width 21' (6.4 m). -- Loading door opening of 10' (3.05 m) x 21' (6.4 m); 1/8" aluminum side wall bumpers, side hinged doors, exterior installation. -- High HP will service the heat requirements up to 245k BTU/Hr. -- Electrical requirement of 230 VAC, 3-Phase, 60 Cy; 7.21 kW/Hr. -- System includes: Timber Dry management automated Dry Kiln Controls for each kiln, touch-screen operator interface, data recording, optional remote access, and networking capability, Replacement part kit for a kiln. Manuals & Blueprints

Unassembled Front Load Kiln with Standard Heat and Exhaust -- Interior dimensions: H 17' 6" (5.33 m), D 25' 8" (7.8 m), W 26' (7.9 m). -- Loading Door Opening: height 14'6" (4.4 m), width 25'3" (7.7 m). 1/8" Aluminum Bumper Walls, Top Hinge Door, Exterior Installation. -- Average 4/4 capacity: 25,459 Bd Ft. with 3/4" stickers. Average 8/4 capacity: 33,293 Bd Ft with 3/4" stickers. -- Price shown is for kiln only. -- Standard HP Heat requirement: 382k BTU suitable for drying dark hard woods; Optional high HP Heat requirement: 674k BTU suitable for drying softwood and white hardwoods. -- Electrical requirements: 480 VAC, 3 Ph., 60 Cy; 16.5 kW/Hr. Timber Management Control System with touch screen operator interface, data recording, remote access & networking capability. -- Features: Control room with heated air intake; 12'H x 4'D x 26'W. Top Hinge door opening System includes "230" electric chain hoist. Boiler Room: 12' W x 25' D x 17'6" H. 10' roll up & (1) access door. - Timber Dry Management Network Capability.

Nyle Kiln L300 - L300 Nyle high temperature Lumber drying Kiln - 240v single phase. Capable of temps up to 160 degrees. - Bought new in 1999 Call 800-459-2148 for more info.

2014 Nyle L200M with 3500 bf hardwood capacity. 220 Single phase. Does not include fans. Includes controls, switches and wires. Power vents. Last used about 6 months ago. Photo is not actual kiln. Call 800-459-2148 for more info.

Nyle PHT350 Kiln System was powered up and tested, but not put into production.