Sawmill Equipment For Sale

2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895

Baker C Resaw with Return. Located in NY. #C929

Baker model a bandsaw with return conveyor

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive

1995 Baker MDL BBR-O 3HD Band Resaw

Baker Band DBL End Trim Saw with Belt Waste Conveyor & Hyd Drive

12" capacity 25HP motor 460 volt 3-phase

1997 Baker 4 HD Resaw with Full Return

Large Sawmill Operation For Sale Located In East Texas in the Piney Woods, one of the densest forests in America, Custom Cut Lumber has been doubling its production every year for the past seven years last year we cut about 7 million board feet. The potentials are still yet much higher than that. Our crew varies from 35 to 50 men, depending on the season, and in the event of sale, most of these men would want to continue working on site for the new owner. We have developed into a number of niche markets that have served us well and the equipment here on the facility is equipped to produce a wide variety of products. One of the keys of our own success has been our diversified production. We have been able to shift production to supply different markets when the prices best served us. We cut for a variety of industrial applications: matt timbers, railroad ties, pallet material, dunnage, and a number of other products. We have built long term ongoing relationships with about 20 companies and hundreds of other individuals for whom we regularly cut orders. Our accounts receivable consistently receives payment from our customers over 33% faster than the national industrial average for our business type. We receive logs from about 20 local logging operations and companies in the east Texas area and the supply of pine, and mixed hardwoods including red and white oak, sweet gum, elm, ash, etc., is plenteous, along with regular and steady supplies of eastern aromatic red cedar, black walnut, hickory, etc. The mill is equipped with in-ground scales to weigh log trucks and tractor trailers, and an office building. There are 5 primary cut stations, including one with an end-dogging scragg mill with parallel 56” circle saw blades, dual vertical edgers, and a down feed green chain with a 4-head trim saw, a Baker 4-head resaw, and vertical bandsaw for trimming down sidecuts into pallet material. A cant breakdown station is equipped with a 2-head Baker split saw, a 5-head Newman trim saw, a Baker 5-head resaw, a notcher for runners/stringers, and stacking racks and belts for cutting and stacking pallet deck boards and stringers, with accompanying dust collection systems. In addition to the end-dogging Scragg mill, there is another Scragg mill station where we process slabs and smaller logs. There are two Baker 3630E Bandmill's with accompanying chop saws that we use to cut mat timbers, beams, dimensional lumber, slabs, mantles, etc., up to 32’ long and up to 30” wide. We have firewood splitters and stacking facilities as well, and a loading ramp for our woodchip markets. We have two 6,000 BDFT wood-fired kilns, numerous drying sheds, a mechanic’s bay with locking cargo container for valuables. There are two rental houses on the property, presently occupied by rent-paying occupants. There is a 30” Buss planer, a board edging station, two 48” chippers, Our support equipment includes 4 skid steers, 2 front-end loaders, one equipped with a

Baker 2hd Bandsaw #CC0024

Baker 12" resaw w/ cross over chains and return. Machine has four sets, all manual, line shaft ready. Located in PA. #C916

Single head Baker resaw | 3 Phase 480V | 30HP | Capacity is roughly 6" wide x 6" tall

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

1994 Baker BBR-0 Single Head Resaw Hydraulic Belt Return 20hp Motor

Baker Mdl BE-O Stationary Edger With 15hp Motor, On Board Hyd Power

BAKER - BBR0: Horizontal Resaw with Powered ReturnSpecifications -- 6" Wide x 12" high cap. -- Standard spring blade tensioning system; 13'-2" x 1-1/4" x 0.035 Blade provides thin kerf savings. -- Quick & easy blade height adjustments. -- 28" Diameter; CNC machined; dynamically balanced; all steel band wheels. -- Rough top feed combines with: Opposing side feed rolls. -- 20 HP High Efficiency, 3-Phase electric motor. -- Variable feed speed: 20 - 120 FPM (6 - 36 MPM). -- Includes -- Powered return conveyor.

BAKER BBR-0 5-Head Horizontal Resaw;Specifications: -- 6" Wide x 12" high capacity Re-Saw. -- Standard spring blade tensioning system; 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings. -- Quick & easy blade height adjustments. -- 28" Diameter, CNC machined, dynamically balanced, all steel band wheels. -- Rough top feed belt combines with opposing side feed rolls. -- Equipped with: -- 20 HP High Efficiency, 3-Phase electric motor on each head. -- Variable feed speed from 20 to 120 FPM (6 to 36 MPM).

Single Head Baker A Bandsaw. Hydraulic feed. 20hp motor. #C999

2018 Baker CX 2hd Bandsaw. 12x12. 30hp motors. Variable speed feed: 20-120 FPM hydraulic feed system. #CC0021

SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRICE INCLUDES A COMPLETE REBUILD AND A FULL WARRANTY!