Sawmill Equipment For Sale
.gif)
3796 Results Found
Call for Price
HewSaw SL250 Trio sawing line from 2005 This line has already been dismantled and loaded into containers. It is ready to ship! - Consists of log positioning devices, conveyors and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 6.2 m - Feeding speed of the sawing line can be adjusted from 50 m/min to 150 m/min. Top diameter: 100–420 mm Maximum log diameter: 550 mm Cant height in Chipper Canter: 75–410 mm Cant width in Chipper Canter: 75–410 mm Cant height in Rip Saw: 63–310 mm Cant width in Rip Saw: 75–410 mm Saw kerf: 4.2–5.0 mm Chip length: 20–30 mm Sawline 1. Measuring conveyor 2. Log scanner 3. Log positioner 4. Chipper canter 5. Cant scanning conveyor 6. Cant scanner 7. Cant saw 8. Seperating conveyor EK2 9. Cross conveyor 10. Belt conveyor 11. Cant turner 12. Infeed conveyor 13. Rip saw 14. Belt conveyor 15. Belt conveyors under machines, for waste handling 16. All electric boxes
Call for Price
23' Hi-Tech Scanner with Dyna Vision Lazers & Allen Bradley 1200P Control Console.
Call for Price
Call for Price
Call for Price
$ 6,000
Working daily High Point band resaw upto 12" wide cut, powered baker hold down added. 575 Volt 20 hp motor with 575 5hp motor on the hydraulics. Transformer to 480 volt available. Extra blades and parts. asking $6,000USD. Working daily High Point band resaw upto 12" wide cut, powered baker hold down added. 575 Volt 20 hp motor with 575 5hp motor on the hydraulics. Transformer to 480 volt available. Extra blades and parts. asking $6,000USD Call 800-459-2148 for more info.
Call for Price
$ 20,000
HMC AC-40 4 head-block carriage, Silva-Tech set-works with spare parts, air dogs, husk has 48" dia bottom blade and 36" dia top saw, includes complete mill package including 42" chain Log Turner (Sawmill) and nose skids, working condition
$ 32,500
HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.
$ 45,000
HMC 4 head-block circle mill, complete mill package, includes husk w/ top saw, carriage drive, operator cab, and all controls, price includes BRAND NEW set-works and mill gone through shop and ready for production
$ 6,500
HMC drop belt, 24" wide belt x 13' long, air lift cylinder, good working condition
$ 5,250
chain type log turner, sized for 40" carriage, hyd drive, good working condition
Call for Price
HMC V-2110 Slant Track Debarker w/60Hp Motor on Head, Onboard Hyds, Controls & Wood Constructed Cab S/N 1827-05 w/Patz 50' Barnsweep, Electric Drive, Counter Clockwise Rotation (20' Section Has A Cover), 10' 8" x 30' 4 Strand Log Deck w/Stop N Load, Hyd Drive, Attached Catwalks, 11" x 27' Ladderback Chain Conveyor w/Hyd Driven Gear Drive & 25Hp Hyd Power Pack
Call for Price
HMC V206H Rosserhead Debarker S/N 1147-79
$ 20,000
HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp carriage drive, air powered dogs, 40' long track, was used with band head, includes cab, controls and log turner, complete unit ready to operate and in good condition
Call for Price
.jpg?width=300&height=200&mode=pad)
2002 HMC ET-10 Double End Trim Saw.
$ 14,000
HMC Two saw trimmer, Model ET10: Operator on left; NO electric setworks--manually operated hydraulic valve type; standard 10HP electric motors on saw blade; standard hydraulic system; NO belt conveyor. Offered as-is/where-is with no warranty or guaranty, as removed from service.
Call for Price
HMC 75HP DC Carriage Drive S/N 137-98
Call for Price
HMC Carriage 5x10 Cab with controls System is already removed from service and ready to load. Notes from seller: Carriage is 17'1" longKnee spacing is 63" from 1 to 2 78" from 2 to 3 1 to 3 is 141 1/4" Carriage frame is 76 1/2 " wide Track centers are 62" Track rails are worn out. We used the old track frame for our new carriage
Call for Price
HMC Debarker Cab Controls 20"x20' Belt Waste Conveyor Model: V206HST S/N: 1518-93