Sawmill Equipment For Sale
.gif)
3805 Results Found
MLS Number 10791295 Williams Horizontal Wood Hog 200 HP 24" wide 16 Ft vibrating conveyor With soft start
WILLIAMS hammermill S/N 15958. Top opening approximately 12" x 18". 2 1/2" fixed wide hammer type. No motor but base for direct connection. Top feed hopper included. Used to grind shavings. $4,800.
Call for Price
Williams 34KS Hammer Hog
Call for Price
Williams Drop Feed Hammer Hog S/N 16360
.jpg?width=300&height=200&mode=pad)
Williams Horizontal 50" Grinder with Webster Vibrating Conveyor s/n 20492, 200hp motor
Call for Price
Williams Hammer Hog 30 with 125HP Motor S/N 20053
Call for Price
$ 90,000
This Wood-Mizer LT-70 Super Hydraulic Wide comes with a 55hp diesel engine with ONLY 60 hour on it! It has always been kept under cover and has been very well maintained by the Woodmizer dealer in Newnan, GA. This unit comes with the pedestal control station w/fully proportional joystick controls allowing the operator to be positioned anywhere to control all head & bed functions. It also has a de-barker, Lube-Mizer and 6 box of blades. This Sawmill is ready to go to work! Call 423-405-8280 for more info or to make an offer. [email protected]
2001 Wood Mizer LT40 Super Hydraulic, Wood Mizer LT40 Super Hydraulic with re-saw attachment with setworks, Replaced the hydraulic motor for the re-saw and replaced the guides. 25HP Electric Motor. Road ready. Can be switched to portable power - costs around $4000-$5000 from Wood-Mizer. Call 800-459-2148 for more info.
Complete set up for Sawmill Operation, 2022 Wood-Mizer LT70 Super Wide Hydraulic. Portable. Diesel Engine with 611 hours. Laser, 2022 Wood-Mizer EG200 Edger with 541 hours, Grinder, 2022 20' Deck, 2022 Heavy Duty Conveyor. Single Phase 220, 2022 Transfer Table with Steel Rack, Wood-Mizer BMT 250 Toothsetter, Wood-Mizer BMS 500 Sharpener, Blades and Parts Call 800-459-2148 for more info.
Call for Price
Wood-Mizer Sawdust Conveyor 3 phase power: Currently wired 48V0 but it can be wired 240V. The flat length is 21', the elevated is 11', the height is 5', and the width over all is 16".
$ 35,000
4 head Wood Mizer resaw with runaround. Motors on each head are NEW. All functions work great. $35,000 Call 706-271-8444 or 423-584-7380
Fully Hydraulic, Wide increases max width of cut to 34", Diesel engine with 1800 hours, Portable, Debarker (not connected), Lubemizer, Fine Adjust Legs, Remote Operating Station, Cap: 36” log diameter, 21’ log length, and production up to 675 bf/hr. Call 800-459-2148 for more info.
Wood-Mizer LT40 Hydraulic Band Sawmill, Portable, Debarker, Lubemizer, Serviced in November 2023, very little use, 2005, CAT Diesel Engine 37 HP, 991 hours. Call 800-459-2148 for more info.
Call for Price
Power: 22 kW Electric Max log diameter 100 cm Max width of cut 86 cm Max can’t width 78.5 cm Max depth of cut 33 cm Touch Screen Setworks Head up/down Electric Head forward/reverse Electric Blade guide Electric Blade lube Automatic blade length 5000 mm Blade width 38 mm
$ 100,000
2005 Wood-Mizer LT300 thin kerf 30 HP horizontal band mill w/ soft start mounted controls, 2,900.5 hours, hydraulic dogs & stop & load, electric carriage w/ (2) new inverter drive motors w/ setworks – electronic & latest generation - 12’ x 5’ (2) strand infeed log deck - 20’ x 24” belt w/ shaft mount electric drive w/ MCC - 6’ x 8’ catch & roll table - Includes spare parts - 25’ (2) strand lumber sorting chain w/ detachable link chain & 7.5 HP drive - 2019 Accucut hydraulic feed edger w/ 30 HP motor, (2) laser line lights, (1) movable saw & moves w/ operator’s wheel steel table infeed & outfeed, 24” wide cutting space, mounted blower and (3) sets of (2) piece split edger blades (ref #145)
$ 4,000
2022 Wood-Mizer LX25 Manual push mill. No power feed. This mill can be converted into a resaw with use of a belt. 7 HP gas engine. Cap 26" x 32.5' with 20' extension. Mill has been made portable. Mill is stored under cover.
Year 2000, 2670 total hr. hours will probably go up yet, 38 hp Kohler gas engine, Only 1000 hr. since new, setworks, debarker, Lubmizer, 50 sharp blades, 4 gas tanks, Owners manuals for everything, Call 717-423-0010 for more info.
Call for Price
2013 Wood-Mizer LT50 Sawmill 47 HP Yanmar Approx 8000 hrs (500 hrs on new engine) Used Regularly
2016, Diesel engine. Around 14,000 hr. In operation and running reliable, Joystick controls, deluxe setworks. Axle & wheels in good shape road ready. Option to purchase loader arms separately Replacing it with a new mill. It is in good working condition. Be sure and check this out. Call 573 823 2015