Circular Sawmills For Sale

COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.

Edmiston 36" Standard Mill, 4HB, right hand, 3 standard dogs w/pantagraph, 3 hydraulic tupering headblocks, electric over hydraulic set works, standard hydraulic feed works, 24" wide offbearer with heavy gearbox drive, 2 joystick buttons, belt driven hydraulic pump package, sawyers cab no heat or ac, 24" wide x 20; live belt. used very little. $45,000 618-918-1421

BRAND NEW! 2017 Hurdle Automatic Sawmill on 48’ 3-beam platform, 3HB Magnum LT tong dog carriage: 40” knee openings, 29” dog openings. Variable tapering, tong dogs. Husk frame assembly w/offbearer belt. New larger sawyer’s cab w/AC. 555 Series feed. 3-strand log deck. HD chain log turner. Cant turner. Feed joystick. Nano setworks. Vertical edger w/laser lights. Top saw-includes adjustable saw guide, 36” saw blade, 30HP motor and saw guard.

Complete sawmill setup with less than 100 hours. Soft start and motor available. 3 head block computer setwork vertical edger cant turners log deck

Meadows #2 Sawmill w/ 50’ of track / (2) movable saw vertical edger, husk frame, carriage drive, log turner, mill is complete w/ (2) strand infeed log conveyor, green chain, barn sweep under head saw w/ outside incline stacking section, Detroit 450 KW genset, 150 HP head saw w/ all wire and conduit included, Ref #205

AdcoWest Sawmill Canter - REFURBISHED - Equipped with Keyknife chipping heads including power - (3) 40 HP Heads and (1) 20 HP (lower head) as specified by head manufacturer No wiring, switches, set works, or controls included but electric motors present are included. Feed through system as engineered by AdcoWest and operated by prior owner. (no infeed table included or feed through chain power) All other feed trough motors are included.

2016 American Pioneer Modular 56" Circular Sawmill w/4 Head Block Carriage, Cab, Controls, Log Turner, Slab Drop, 60' Track, Wheels & Axle w/Air Brakes for Transport

Chase Turbine Mfg. Co. Sawyer's Favorite hand set sawmill, immaculate condition (3 HB), wood & steel frame, 40' track, in track mount carriage drive drum & cable, 100 HP 220V head saw motor w/ WEG soft start MCC, include off bear belt on husk frame & outfeed belt conveyor, (1) w/ shaft mount reduction drive, Selling with (See Chase Edger under Edgers)ref #204, Contact Jackie 931-698-3342

Right hand, 3 headblock, setworks, tracks, cab, and drive. Complete mill was in operation until to the end of 2024. Has some wear but still in good condition.

Cleereman 3 head-block, 141" knees, Model;36, SN; 115, air set-works, includes 56' of track-frame and cable drum, working condition

Cleereman #36 Circular Sawmill 100 HP Electric Engine Left Hand

Cleereman 4 head block , Model 40, air over air setworks, includes cab/track-frame/ carriage drive and all controls, in good working condition

Cleereman 3 head-block, 36" carriage, Timber Tiger electric set-works, includes track/ drive/ 60" husk/ cab and all controls, in good working condition

Cleerman 36 in hydraulic porporational 3-head block right hand carriage w/48ft track; s/n 36833-R-4 Silva Tech computerized set works Cleereman Hydra Power Mod 96213B 10hp Electric/hydraulic proportional power unit; s/n J8772A

Cleereman Model 40 3HB Carriage Track and Panagraph W/ Saw Cab and Controls

36" Cleereman LH Carriage. S/N 36-524-95

Cleereman Model 36 3HB Carriage Track Panagraph Cab and Controls

Cleereman Model 48 3HB Carriage, Track and Panagraph

CM Sawmill Comes With Air operated 15ft carriage Selset set works Head works with 48 inch saw 100hp electric motor Hydraulic pack with all hoses FREE Delivery within 100km of Moncton,NB Trailer not included

CMC 3 Head Block Circle Mill cab and controls carriage and Track