Sawmill Equipment For Sale

Baker 3665D Diesel Power Portable Band Mill

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

Baker Dominator 3650E Sawmill Edmiston Edger Morbark Chipper with diesel engine All decks and rollers

Baker C Resaw with Return. Located in NY. #C929

Baker 3hd bandsaw with return and crossover belt 2012. #C938

2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895

Baker 4-Head Resaw Model C 20 HP Motors Operating daily

Baker 2-Head Resaw 20 HP Motors Return Conveyor

Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

BAKER ABX Single-head Horizontal Resaw w/Roller Return Conveyor & Thin Material Guide PackageSpecifications: -- 12" x 12" Cut cap.; 28" precision machined wheels and 30 HP TEFC motor for main drive; 2 HP hydraulic feed system with a 10-gallon reservoir, flow control valve for variable feed speed of 0 - 90 FPM; with filter, & remote feed shut off, and powered infeed. -- Features: -- Powered head rise/fall system with 40:1 ratio; endless flat belt infeed w/floating overhead feed rollers, each is hydraulically powered; spring blade tensioning. -- 3/4" - 12" Cutting width, 1/4" - 12" cutting height, uses 14'2" x 1" x 0.035" hardback or 14'2" x 1 1/4" x 0.035" hardback blades; BAKER flat guides for higher production, accuracy & extended blade life. -- Includes: -- 12" Roller return conveyor; NEMA 12 Electrical panel with starter, motor overload protection, pedestal mounted remote start & stop stations; 6" x 6" (15.24cm x 15.24cm) square outlet with a 90 degree adapter chute with a 4" (10.2 cm) diameter outlet, which can be rotated to serve four directions of discharge (600 CFM recommended).

BAKER - A, ...Single-Head Resaw w/Powered Return - 6" x 12" Cut Cap.Specifications: -- Max. 6" Wide x 12" Tall timber cap. (with conveyor set at zero) w/Slide Return (photo shows powered return); hydraulic variable feed speed rate 0 - 120 FPM 6";-wide, hydraulically-driven powered conveyor with rough top belting. -- Equipped with: -- 20 HP Electric motor, 28" dia, CNC machined all steel band wheels; uses 1" or 1-1/4" x 13' - 2" x 0.035" hardback band blades (not included). -- Includes: -- Belt conveyor return.

Baker 2hd, Baker 3hd Bandsaws and 2 Baker Dedusters. Located in VA. #C961

BAKER C 4-HEAD Horizontal Resaw w/Powered Return6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;Specifications: -- 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. -- Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt flange; rough top feed belt combines with opposing side feed rolls and air pressure hold over rolls; idler hold downs . -- (4) 20 HP Total Enclosed Fan Cooled Motors; Thin-kerf technology and the Baker Low Profile Flat Guide System generates up to 60-70% less sawdust and up to 25% more boards, easily out-producing a gang rip. Complete with: -- Hydraulic variable feed speed from 20 to 120 FPM (6 to 36 MPM) with a tank, flow control and remote feed shutoff; powered side feed rolls. Includes: -- Powered conveyor, powered return conveyor, NEMA electrical panel with the starters, motor overload protection, remote start/stop stations.6" x 6" Square dust collection with a 90° adapter chute to a 4" dia. outlet (can be rotated in (4) directions); 600 CFM required for each drop.

3 phase/480 volt, excellent condition

Baker Model DX two head Resaw complete with 5 strand infeed deck with pop up stops, 20’ infeed, 20’ outfeed/ cross over deck, return conveyors with sweep, and a Baker 3 strand green chain with Baker tie stacker off the end. Saw is capable of receiving 18” wide by 11” tall material. Complete system including computer setworks, hydraulic unit, control cabinet, and blades to get you started. Asking Price $100k

Triple Head Baker bandsaw. Model BBR-OC 3 head with return. Sell price $37,000

2015 Baker Dominator Band Sawmill, Model 3650E with Baker (3) Strand Infeed Deck. Excellent condition, hooked up to power and ready to be demonstrated. Low use.... Good Track Infeed deck has new cylinder Hydraulic over electric general factory networks. ref# 119 Call Jackie 931-698-3342. Make us an offer Seller is negotiable on this machine that is over $100,000 new

Baker 3650E Band Sawmill Computer Setworks Debarker Laser 480V 3 Phase Very Good Condition