Sawmill Equipment For Sale

Nielson Model 800

3 phase, 110V, will grind 24" - 30", will do alternate bevel, good condition

Circle Saw Grinder 110V 3 phase

Nordfab Air Blower with 40HP Motor

Northern Automation Lumber Stacker with Lift Table. 3 phase. 36"-192" capacity. #C935

Northland Kiln, 30' long. Electric. With carts. #00884

Northtech horizontal band resaw, (2) blades, will cut up to a 12 x 12" cant, powered by (2) 20 HP 460 Volt 3 Phase motors, runs (2) 1 1/4" band blades, Excellent Condition, (new condition with less than 4 hours use). Owner is retiring. Ref# 119, Contact Amy (928) 723-9449

Has (2) Blades Will cut up to a 12 x 12" Powered by (2) 20 HP 460 Volt 3 Phase motors Runs (2) 1 1/4" band blades Excellent Condition, (new condition with less than 4 hours use).

16 HP 12 filter bags up 4 collection bags lower Lots of pipe

NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln Designed to hold 5,100 bd. ft 4/4 Lumber, or 6,120 bd. ft 8/4 Lumber, Using 3/8" (9 mm) stickers. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max.

(2) Unassembled front load Kilns only System with high HP heat and exhaust designed to hold 8,461 bd/ft (20 cub.m) of 3/4" (25 mm) lumber and 10,475 bd/ft (25 cub.m) of 8/4" (50 mm) lumber (35 cbm). -- Kilns internal dimension: Height 12'3-1/2" (3.75 m), Depth 16' (4.88 m), Width 21' (6.4 m). -- Loading door opening of 10' (3.05 m) x 21' (6.4 m); 1/8" aluminum side wall bumpers, side hinged doors, exterior installation. -- High HP will service the heat requirements up to 245k BTU/Hr. -- Electrical requirement of 230 VAC, 3-Phase, 60 Cy; 7.21 kW/Hr. -- System includes: Timber Dry management automated Dry Kiln Controls for each kiln, touch-screen operator interface, data recording, optional remote access, and networking capability, Replacement part kit for a kiln. Manuals & Blueprints

Unassembled Front Load Kiln with Standard Heat and Exhaust -- Interior dimensions: H 17' 6" (5.33 m), D 25' 8" (7.8 m), W 26' (7.9 m). -- Loading Door Opening: height 14'6" (4.4 m), width 25'3" (7.7 m). 1/8" Aluminum Bumper Walls, Top Hinge Door, Exterior Installation. -- Average 4/4 capacity: 25,459 Bd Ft. with 3/4" stickers. Average 8/4 capacity: 33,293 Bd Ft with 3/4" stickers. -- Price shown is for kiln only. -- Standard HP Heat requirement: 382k BTU suitable for drying dark hard woods; Optional high HP Heat requirement: 674k BTU suitable for drying softwood and white hardwoods. -- Electrical requirements: 480 VAC, 3 Ph., 60 Cy; 16.5 kW/Hr. Timber Management Control System with touch screen operator interface, data recording, remote access & networking capability. -- Features: Control room with heated air intake; 12'H x 4'D x 26'W. Top Hinge door opening System includes "230" electric chain hoist. Boiler Room: 12' W x 25' D x 17'6" H. 10' roll up & (1) access door. - Timber Dry Management Network Capability.

Nyle Firewood Dry kiln No chamber included

OGAM Gang Rip 30HP Motor w/electrical still Hooked Up, Model PO 195, S/N 15149

Oliver Sawmill New Carriage Wheels New battery

ONEIDA AIR SYSTEMS XXK200300 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System. -- 3,800 CFM @ 12" SP to 6,800 CFM @ 2.7" SP with 20 HP Baldor Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (4) High Efficient Axtar Spun-Bonded Media cartridge after-filters for 620 sq. ft. of filter media with inverted plenum. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Fan is welded carbon steel, backward incline, dynamic, two plane balanced. Same as aircraft turbine rotors. -- 16" Rectangular Inlet with square to round inlet adapter. -- Includes: Freestanding Leg Kit with Rotary Airlock, magnetic starter, internal silencer reduces sound to 82 dB @ 10'. MADE IN THE USA.

ONEIDA AIR SYSTEMS XXK070323 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 2,900 CFM @ 1.5" SP with 7.5 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (2) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 310 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Impeller is 16.5" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 10" round. outlet 12" round dia. Includes: -- Rotary Air Lock, magnetic starterOptions: -- Freestanding Leg Kit with Dual 55-Gallon steel drum less Rotary Air Lock...as for pricing. MADE IN THE USA.(Actual P/N XXK070323-460-AIR).

ONEIDA AIR SYSTEMS XXK10 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 3,800 CFM @ 2.3" SP with 10 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (3) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 465 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, teflon-like coating to facilitate dust cake release. -- Impeller is 17" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 12" round. outlet 12.5" x 10" square dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, and Rotary Air Lock. MADE IN THE USA..

ONEIDA AIR SYSTEMS FXK041500 Cyclone Dust Collector w/ After-Filter Plenum: Cyclone & Fabric Filtration Dust Collection System. -- 3,800 CFM @ 12" SP to 6,000 CFM @ 2.7" SP with 15 HP Baldor Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (4) High Efficient Izumi Axtar Spunbond Media cartridge after-filters (hanging) for 620 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Fan is welded carbon steel, backward incline, dynamic, two plane balanced. Same as aircraft turbine rotors. -- Inlet size 14" round. outlet 16" round dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, internal silencer reduces sound to 85-87 dB @ 10'Includes Rotary Air-lock for dumping into a waste bin!MADE IN THE USA.

ONEIDA AIR SYSTEMS SAZ10000C Rotary Air LockONEIDA Air Locks use a high-efficiency helical drive, US-made 0.25 HP hollow shaft gear motor to control the flow of discharge material from the dust collector via a rubber-padded wheel that rotates at a preset speed. The airtight seal with the collector is maintained at all times, ensuring peak airflow performance while waste is continuously deposited into open bins, industrial hoppers, or transfer blower systems.Specifications: -- 10" Dia. flange ideal for use with many of our professional and industrial systems, including the High Vacuum dust collector (with custom clean-out cone). -- US-made 0.25 HP hollow shaft Helical gear motor. -- Impeller Type, welded steel with industrial, replaceable rubber paddles. -- Inlet/outlet 10" round. -- Designed for wood and other non-explosive dust only; not intended for severe duty.