Sawmill Equipment For Sale

Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston),Specifications: 386' long x 24' high, runs 6' - 16' L longer, thickness 1" - 4" thickness, width 6' wide packs, 3 1/2 - 22" wide packs, 3 1/2 - 22" wide, Loaded on your truck, all controls are in order ,this system was running December 1, 2023, ref #171 – For More Details Call for Complete Component System

Mid Oregon Chop Saw

Brand New, Never Used 5' x 10' 3 Screening Decks

Mighty Mite Sawmill mounted on Trailer 86 Hours on the system 150 HP Perkins Diesel Engine Slab drop and take away 58" Chipper with 24" Infeed Belt Outfeed Conveyor Scissor lift for stacking lumber

Mighty Mite Swing Saw 9" x12" x 30' capacity Infeed outfeed conveyors Perkins Diesel Power Precision 58" Chipper 150HP Incline Out Feed Conveyor Trailer Mounted Total Portable Optional 2013 Kenworth W900 Loader Truck W/ Olympic 10K Self Load Knuckle Boom 250/300 KW Gen Set Mounted On Truck (Two Available)

MIGHTY SAW CIRCULAR SAWMILL Mighty Mite Swing Saw 9" x12" x 30' capacity Infeed outfeed conveyors Perkins Diesel Power Precision 58" Chipper 150HP Incline Out Feed Conveyor Trailer Mounted Total Portable Optional 2013 Kenworth W900 Loader Truck W/ Olympic 10K Self Load Knuckle Boom 250/300 KW Gen Set Mounted On Truck (Two Available)

23' x 30" x 8" Roll Case w/ Electric Drive

New Never Installed 2007 Mill Tech Precision End Trim Saw; Clam shell Opening P.E.T Trimmer with 2 Banks of Motorized Saws; Right Hand Lumber Line; Each Bank with W/Zero Saw & 3 P.E.T.Saws W/Infeed System; Operates on Skip Lug Basis with Mill Tech; Inches & Centimeters

Miller Dialarc 250 AC/DC Welder

MLS Number 11983452 USNR M6 Millexpert Edger Optimizer Computer System USNR M6 Millexpert computer system for edger. Installed 2010 and took out December 2022. Has one windows 7 analize computer and one data acquisition computer. Seventeen M6 Dynavision scanner heads, an Allen Bradley PLC-5/40E with five 1771 input cards and seven output cards, four 1771 linear positioning cards. Three TT5RBU0240 24” stroke temposonic wands, four 60” stroke TTSRBU0600 wands. Seven Moog model 641F229C valves. Two operator panels.

Miner 3 blade vertical edger, 50 hp electric drive, self-contained hyd unit, includes various spare parts, very good condition

Miner Edger 2 saw Laser lghts Good condition

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- Kohler 30 HP gasoline engine with electric start and including battery and fuel tank -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls, fixed and movable laser light.

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- 30 HP electric motor with 480 volt 3 phase magnetic starter included -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls

Miner B-53 STATIONARY Board Edger -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 14"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

Miner edger, 4" thick x 24" wide capacity, 1 stationary, 2 movabe blades, 5' infeed, 8' outfeed, working condition

Location: Connecticut 85 KW Mitsubishi genset, 100 gal fuel tank. Call 800-459-2148 for more info

Mobile Dimension Circular Sawmill. 30' with 6' end stands. 25 HP vertical and 15 HP horizontal 3 phase. Still set up. This mill will produce 6 mbm in 6x6 program. Call 800-459-2148 for more info.

MOLDOW 184 MXN-324 Expandable Baghouse - 18 Total Modules with (4) Inlet Sections. Specifications. -- 72,000 CFM modular/expandable unit, currently with (14) Filter sections @ 5,000 CFM per section (24 bags per section). -- Approx 336 filter (8.6" dia. by 120" long) , 9,300 sq. ft. of total filter media, 7.75:1 air to cloth ratio Shell is under negative pressure allowing a high efficiency clean air fan.. -- Main Fan: Air Handling IAP A600 SWSI, Class IV, S/N 26862-1 rated at 90,000 CFM @ 1321 RPM, 16.0/20.3" SP & 290/308 BHP. Fan is A - Airfoil type wheel & is non-overloading powered by MARATHON "445Ta" belt driven TEFC 300 HP motor.. Currently fan inlet is connected with a 30" pipe. Regenerative Filter Cleaning: -- Each row of filter bags is cleaned continuously during operation by use of a regeneration carriage/trolley rides along top of filter bank) with a 4 KW (5.3 HP) high-pressure fan that sends air from the clean-air chamber back through the filter bags using nozzle pipes.Bags are fitted with an inner spring bracing. Special bag design reduces air velocity which increases air and dust loading considerably. -- Equipped with: Built-in bottom drag link chain which brings dust to one end where it is discharged through approx. 9" x 30" Rotary Air Lock (RAL). Currently a transfer fan moves dust to storage bin.. Summer/Winter Diverter/Abort Gate connected on outlet/return air line.Comes with: -- Relay Fan, IAP 911 RBO, to pneumatically convey collected dust at discharge of RAL. -- Platform with safety railings and ladder to access regeneration cabinet (return air plenum). -- Interior electrical control panel, support frame, and exterior ductwork. Single heavy sheet metal flanged rectangular return air pipe. Overall Dimensions: -- 45' Long by 12'-9" wide by 28.5' high (5.5' hopper to ground, 8' high hopper and 15' top section). -- Professional dismantling, rigging, transport and installation is available upon request.

MOLDOW Style, by ' NEU-JKF', Modular Baghouse with chain-sweep bottom feeding into a Rotary Air Lock (RAL) at the end of filter bank. -- General Data: Approx 35,600 CFM running at a 5:1 Air-to-Cloth Ratio. Total of 7,125 sq. ft. of filter area comprised of (14) modules each containing (27) filter bags. Filter bags are 8.5" dia. by approx. 96" long. All modules including inlets are fitted with filter bags. -- Main fans: Total of (3) Material Handling (MH)fans. (2) NORTHERN BLOWER Size 23, Des 5691, CL 3 Fans each belt driven by 60 HP TEFC motor. Fan inlets supplied by 26" dia. pipes. (1) type JK 25 HP MH blower. -- Filter Cleaning: Each module is supplied with a 2 HP approx. regenerative high pressure fans to sequentially back-flush the dust from the bags during operation and thereby falling into the continuous hopper with a drag-chain-sweep mechanism that rides along the bottom of hopper and feeds into the RAL. -- Return Air: All modules are ducted into one return air manifold pipe. -- Electrical Controls: CONQUEST free standing electrical control panel with visual light indicators for monitoring system status. Panel contains all start/stop pushbuttons and selector switches, and main disconnect. -- Includes: Steel Support frame with a walkway to the access doors which can act as explosion vents. Full set of polyester filter bags. -- Inquire for a cost for professional dismantling and transportation.