Sawmill Equipment For Sale

1 with a return belt. 1 without lineshaft,no hyd. or air. Wheels in need of crowning but in working condition.Edger 4"x 36" 2 blade 1 movable 6'in & out deadroll,lineshaft working condition. You have the option to buy both resaws or just one. Joe Yoder 1741 Soldier Rd. Fort Scott, Kansas 66701

Morgan Double End Trim Saw

Morgan Slab Saw w/30HP Motor

Morgan single arbor gang saw, capacity 12" wide x 5 1/2" thick, 100 hp electric drive on arbor, feed rolls are hyd drive, includes spare spacers, could be used for scragg slab edger, good condition and ready to work

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice.

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice. Length: 22' 1"; Width: 11' 3"; Height: 8' 2"

MOSLEY - HBLA111-200S-4-AP-12/9-BRD, ...2-Ram Horizontal BalerSpecifications: -- Main motor: 200 HP -- Feed opening: 60" x 120" -- Bale size: 31" 62" x 44" -- Production capacity: 24 TPH OCC -- Main cylinder: 12" -- Eject cylinder: 9" -- Platen force: 98 tons -- Ram face pressure: 227.5 PSI -- OCC weight: 1,400 Lbs -- Non-ferrous: 1,600 Lbs -- Solid waste: 2,300 Lbs -- Plastic: 1,500 LbsEquipped with: -- Shear blade -- Wire Tier -- Photo-eye -- Release door

MOSLEY HARRIS Series AP 16/13 2-Ram Horizontal BalerSpecifications: -- Main cylinder: 16" -- Eject cylinder: 13" -- Main motors: (2) 100 HP -- Feed opening: 86" x 20"Equipped with: -- Liner Plates are roughly appx. 50% and evenly worn floor. -- Strapper is a 330 Model, but still works very well. -- Baler has been used primarily for OCC and ONP.

MSI - AT-643, ...Horizontal Auto-Tie Baler with Infeed ConveyorSpecifications: --60" x 43" feed opening --Bale size: variable x 43" x 30" --Bale weights: 900-1700 pounds. OCC" 5 TPH --7" cylinder repacked --40 HP --New hydraulic pumps, New T-1 Liners on floor and platen. --60" wide x 25 feet long slider bed conveyor included

Harp Series machining Center for long and narrow parts! Available in 4 or 5 axis systems. Robotic material handling options! The HARP Series, specifically designed for processing High Aspect Ratio Parts (long & narrow parts), is typically customized with Clamping Fixtures and Spindle Configurations specific to the parts being manufactured. With the ability to operate with up to four (4) independently and simultaneously controlled cutting heads, the HARP machines increase throughput of up to 10 times compared to traditional CNC machines. In the door & window industry HARP machines can be found producing over 1,600 door jambs per 8-hour shift with fully automated load/unload systems.

MULTIQUIP GENERATO MODEL DH-04801 45KW GENERATOR IS ON A 2004 DUOLIFT TRAILER WITH ON BOARD FUEL TANK LOW VERY QUIET GENERATOR

MULTISCORE CD-4-30 CABINET GROOVER: -- Specifications:30" Wide x 50" long max. cap., 1" max. material thickness; 30 HP main motor; 3-15/16" dia. arbor @ 3,500 RPM; aluminum bedplate slotted at 1-1/2" spacing for about (20) tool positions; quick release tensioner on the arbor drive belts. -- Equipped with: Feed System: Reciprocating push fence with wood extension fingers to assure consistently square cuts; push fence carries the part through the entire cutting area completely past the arbor. Extension fingers are laterally adjustable for different cut widths. Pneumatic infeed plastic holdover fence laterally adj. to hold parts up against the fence. (8) Hold-down arms with lateral & vertical adjustment mount to a T-slot rack to press parts against the feed table during machining. -- Feed Drive/Speed: 2 HP - 1,750 RPM AC Inverter; variable feed motor via gear motor, with dynamic brake; 0 - 60 FPM. Features: -- Material is pushed off the exit side while machine operator can load new parts at the infeed table. Cutterhead assembly is end supported, adjustable up & down via handwheel, and jam nut tooling locking system. -- NOTE: This machine is currently setup for wainscoting and kitchen cabinet doors.

Multitek 40KW Generators: 40KW 3-phase 240 volt generators (8 available). All have approximately 27 hours of testing. These are new units available for $16,000 each.

Main fan motor 20 HP RAL opening 14” Electrical panel Auto shaker filter cleaning Inlet pipe size 14” Number of filters 63

Murphy Rogers MRM-16-185H Shaker Dust Collector 16” dia. inlet 25 hp exhauster motor 81 filters 6” dia. x 68” lg 668 sq/ft of filter 6,000 cfm estimated capacity Serial Number: 1020

With bag house / LMC Pulse Jet filter model 81FSD12 Low pressure Cyclone model LP-961 Includes rotary airlock and rain cap and stand WT 5,914 Low pressure cyclone model LP-48 Includes rotary air lock and stand wt 1,466 100 horse power fan.

MURPHY-RODGERS - MRZ-17, ...Dust Collector25 HP TEFC BALDOR Motor, 8,080 CFM at 6" W.G., free-standing interior unit; designed for (6) filter bags mounted over plastic waste bags for waste collection. -- Can also be used with barrels (requires boot & barrel clamp, 17" inlet dia.; 336 sq. ft. filter area, 122 cu. ft. storage cap.; quick clamp barrel removal). -- Overall height is 156"; requires 45" x 210" floor space. -- Includes: Bag clamps, shut off and starter

MURPHY-RODGERS MRJ-610-122 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 8,500 CFM approx. @ 9 to 1 air to cloth ratio baghouse dust collector with (60) 10-feet long filters; total cloth area of 943 sq. ft. -- Filter Cleaning: Continuous Self-cleaning Using Compressed Air. -- Main Fan: 30 HP top-mounted blower motor. with approx 18" dia. inlet. --System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, top safety railing, and approx. 16" Rotary Air Lock.Actual model is MRJ 610 -122.

MURPHY-RODGERS MRZ 17/16L Interior/Open 6 Bag Dust Collector with Auger and Rotary Air Lock General specs: Approx. 7,600 CFM @ 8" SP. (6) top filter bags @ 24" dia. by 72" long. (6) bottom disposable plastic dust storage bags. -- Fan/Motor: 25 HP BALDOR TEFC motor direct driven fan with electrical starter. 17" diameter inlet, with lifting hooks. The bag collector motor is brand new and has never been powered on or fired up. -- Comes with: Main approx. 17" dia trunk line, shut-off, and Quick clamp removal for filter and plastic bags. -- All steel construction with rugged support legs. Air Deflectors allows operator to adjust the air flow and amount of waste evenly into the 6 waste bags. -- Note: NFPA 664 (Fire Code) states that a max. of 5,000 CFM is limit allowed for indoor enclosure-less dust collectors.

MURPHY-RODGERS - MRSE-14-RAL, Baghouse Dust CollectorSpecifications: 14" Inlet dia.; 4,836 CFM; (63) bags with 520 sq./ft. filter area; 9.3:1 air-to-cloth ratio; 20 HP fan motor; primary separator built into unit; secondary separation of fine particles by filter bag section; cone shaped bottom empties into (4) 55-gal. drums. -- Equipped with: -- Rotary Air Lock. -- Fully automatic shaker controls with: Electric shaker as standard; consists of panel box with shaker starter; transformer for 115 V circuitry; solid-state timer for fan deceleration & shaking cycle. -- All necessary relays and internal wiring inside the panel box.