Sawmill Equipment For Sale

BELFAB LW3-10 Modular Dust Collection System w/ HUMMER BlowerSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 1,800 RPM and 4,600 CFM, HUMMER Blower, 12" inlet -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter 460V or 230V, 3-Phase.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.

BELFAB LW6-15 Modular Dust CollectorSelf-contained patented modular designed unit for interior use with direct drive 15 HP - 3,600 RPM motor, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (6) High Efficiency 1/8" thick needle felt cloth bags up, 210 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

BELFAB LW6-15 Modular Dust Collector (HUMMER)Self-contained patented modular designed unit for interior use with direct drive 15 HP - 1,800 RPM motor, 5,000 CFM "HUMMER" centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (6) High Efficiency 1/8" thick needle felt cloth bags up, 210 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

Belfab Pyradia NBM-OP Dust Collector (3) Systems available

BELFAB LW4-10 Modular Dust Collector. 10 HP, 3,600 RPM, 4,600 CFM centrifugal fan assembly @ 7" static pressure, standard blower. Specifications: -- Self-contained patented modular designed unit for interior use with direct drive -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and 12" inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) plastic collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available.

BELFAB NBM3-15 HUMMER SERIES Dust Collector (Modular)Patented Modular Technology; 5,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Interior and exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA safety regulations, this unit has (3) filter modules. -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: 15 HP @ 1,800 RPM High Efficiency "Hummer" TEFC motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 14" Inlet dia. and 17" outlet dia., 495 sq/ft filter surface area. -- Control Panel & Shaker mechanism includes: (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism, all pre-wired. -- Unit comes with: (3) Heavy Duty plastic tilt trucks, rollers for disposal of waste & adaptors. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.

BELFAB NBM7-30 TILT-TRUCK DUST COLLECTOR with Patented Modular Technology: Patented Modular Technology allows it to be purchased for current needs and easily upgraded as required; designed exterior use. Specification: -- Each "NBM" filter module is fitted with: (1) Service door & (2) explosion doors per NFPA safety regulations -- Rated Capacity: Rated @ 9,000 CFM with 9.5" static pressure -- Equipped with: Direct drive centrifugal fan assembly with 30 HP Hummer blower motor, anti-spark cast aluminum impeller, 20" inlet diameter.Unit includes: -- (1) Electrical Control Panel for (2) motors. (1) Soft Start starter for the main blower, (1) for the Auto Shaker -- (7) NBM filter modules, each with (18) 7" x 60" poly-twill cloth filter tubes, 990 sq./ft. total cloth. -- (60) Cu./ft. waste storage cap. via (7) Heavy Duty plastic Tilt-Trucks w/rollers; each with air-tight quick coupling plate.Options:Security System for Air Return (Included); -- (1) 20" Explosion Back Draft Damper, VIGIFLAP with dust sensor system integrated & control panel - ATEX CERTIFIED, -- (1) 24" Fire Damper with status signal. -- (1) 24" Derivation Tee. -- (1) 24" Diameter Abort Damper. -- (1) Single Zone Spark Detector, 38" max, (2) detectors, (1) sprinkler.

BELFAB LW3-7.5 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use with 7.5 HP, 3,600 RPM and 3,500 CFM @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down, 126 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V -- Additional options available.

BELFAB BA-1800C Industrial Air Cleaner (Ceiling Configuration)The BA-1800 industrial air cleaner from BELFAB is a multi-purpose air filtration unit for ambient air filtering. The BA-1800 can be used on a wide range of industrial applications capturing fine dust released into the air therefore improving the air quality in a manufacturing environment. Whether you require a medium or high efficiency system, the BELFAB BA-1800 can be configured to your operating needs for optimal dust control. Suitable for ceiling or ground installation the BA-1800 allows you to specify the best filter arrangement for your application. Features: -- Low installation and operation costs -- Flexible design to accommodate most applications -- Low maintenance and quiet operation -- Multiple mounting options and can be a ceiling or ground configurationIncludes: -- Adjustable louver to adjust the air pattern for better air circulation and comfort. -- Dual inlet 3/4 HP Blower motor with 1,800 CFM capacity -- MERV 8 Pleated filter with MERV 13 Pocket filter -- Sound level 76 dB. -- (2) Modules for high efficiencyApplications: -- Welding and smoke fumes -- Grinding dust -- Wood dust -- Composite dust and other industrial dustAvailable Options: HEPA Filter to allow for the highest standard of air filtration -- Magnehelic guage to clearly indicate the service interval for optimal efficiency

Bell Industries Circle Saw Grinders (2) Available

Beloit ring type debarker, electric drive, working condition

Benshaw 75HP Soft Start Mdl CBRDB6-124-12

Benshaw 150Hp Soft Start

Benshaw 150HP Soft Start

Benshaw 200 hp. soft start

(3) 60HP Motors (1) 75HP Motor with Large Hydraulic Holding Tank

20HP HYDRAULIC UNIT

Big Jack Scragg Mill

The listing is for all equipment at a closed sawmill. Everything is ready to be moved ASAP. - Timberline big Jake scragg - 48” front saws - 36” back saws all inserted tooth blades. - 10’ capacity - 60ft infeed with step loader for mill - Dead indeed live outfeed - Numerous belts conveyors. - Home made 3 blade flat edger power infeed and outfeed. - 50 ft barn sweep. - The different log decks one with stop and load. - 2 descramblers. - Bandit whole tree chipper needs motor. Has 800 hours on it was wrecked and only damaged motor and cab a little. - 410 printice loader with self propelled carrier. New motor. A lot of misc electric motors, belts and other parts.

This unit is up and running as of August, 2024. The customer is producing mainly: Poplar, Oak and Pine. Capacity: Approx 12,500 board feet