Sawmill Equipment For Sale

Salem Insulated Cab, 4’x8’, NEW glass reconditioned.

6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition

6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good working condition

Salem 6' Headrig This saw was dismantled in 2017 and put in a container. It was never reinstalled. The container is available if someone wants it.

Salem 25hp Electric / Hydraulic Power Unit

Salem 7.5 hp Electric / Hydraulic Power Unit

Salem Linebar Resaw Runaround includes: 52in X 15ft in Feed Rollcase with Positioners & Log Turners, 54" X 35' Outfeed Rollcase with 2-Way Chain Jump Transfers, 12' X 14.5' 5-Strand Transfer Deck with 10' X 11.5' 4 Strand Camelback Chain, 12' X 10' 4 Strand Cant Lowering Deck with Air Stops & Board Tipples, 12' X 14' 4 Strand Transfer Deck, 5 Strand 180° Transfer Return Deck into 11.5' X 15.5' 5 Strand Deck W/ Hydraulic Stops, Flippers & Pin Stops All with Electric Drive

Salem 4'x11.5' Steel Insulated Sawyers Control Booth w/ Air Conditioning

Salem 7' Full Air Strain Vertical Head Band Saw with 26"x7' Slatted Offbreaker

Features 2 equidistant shifting saws ball bearing shifting collars Temposonic hydraulic linear positioned saws Knurled and chromed feed rolls blade access on left belt tailing device dead roll infeed Programmable push button controls and jog to position controls arbor motor hydraulic unit

Thin kerf top arbor gang with infeed and outfeed. Features 300 HP arbor motor access door on left splined arbor guide lube system babbitt pot Salem double side guide milling machine lots of guides lots of saws soft starters control console Infeed features: 3 cross chains cant turner crowder roll

8" x 54" SALEM, bottom arbor, combination gang-edger. Center section only.  Split machine. New solid feed rolls-chromed and knurled. New top press rolls-smooth-split 33" and 15" wide. (4) new 5" bore cylinders for press rolls.  3 7/16", double keyed, saw mandrel.   Hydraulic feed.  Saw shifting device outside of frame but no saws or collars but with shifting arms.  3 sets rubber cushions on press rolls.  All sprockets are new with hydraulic drive.  No infeed or outfeed. 125 HP motor included. No plumbing or electric wiring.  New bearings on feed rolls.  20HP hydraulic power unit. Machine mounted on 6" beam. Price $35,000.00

Salem Top Arbor Gang Rip Saw 8" Capacity 300 HP Motor Blades: Approx 30 Sharpened carbide blades still have wax, and 30 that need to be sharpened Includes: All electrical, misc blades, guides, spacers Included: Milling machine and Babbitt pot System needs a 10 HP feed motor

36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00

MLS Number 10124106 SALEM 2 HD BLK Circular Sawmill Salem carriage opening to 42" Control consul and PLC box Tyrone Berry feed works 100 HP Tyrone Berry hydraulic water cooled pump Laser light system Sawyer booth 3 waste conveyors 2 log in-feed decks Stop & load with ram type log turner 3 sets of 30" live rollers Electrical panel 400 Amp disconnect Many additional parts included

SALEM 62" Linebar Resaw complete with 125 HP motor and drive, roller infeed with slab turners; linebar section with two press roll arms operated by SILVATECH linear cylinder with setworks; resaw is weight strain type-older machine but in good condition, electric screw for raising and lowering guide; outfeed with transfer; cross-transfer with slab dump; return roller conveyor; 3 strand transfer back to infeed. Machine has been setting in present location approximately 6 years. SYSTEM MUST BE REMOVED FROM PRESENT LOCATION.

Salem 54in Air Strain Left Hand Resaw Band Mill, Cartridge Guides, Manual Stop Guide, 1.3 Top / 1.44 Bottom - Call Jeff for more info at 574-370-5050 We can go through this mill if customer needs that. An offbeat bel;t can be added for an additional cast as well.

Offbear belt, wheels and hood included. - Call Jeff for more info at 574-370-5050

Salem 6' x 48" Top Arbor Edger S/N 88-133499 W/20' Outfeed

Salem 54" band Mill - S/N-L96655.83