Sawmill Equipment For Sale

Webster 30" x 25' Vibrating Conveyor

Webster Vibrating Conveyor 18” Bottom, 57’ Length

Webster vibrating conveyor, 18" wide pan x 20' long, electric drive, good working condition

NEW WEG soft starters, open style (for your enclosure), 460 volt. Many options available.  Pricing Examples: 200 hp (255 amps) $2,065; 100 hp (130 amps) $ 1,140; 300 hp ( 365 amps) $ 2,380. Call for pricing for options and different HP's than above. 

WEG GPH2075QC4000 Soft Start, 75 hp, SSW07 type Soft Start, To be cut 6" above and below.

WEG Soft Start, SSW07 type Soft Start, To be cut 6" above and below

WEG GPH2030QC4000 Soft Start, 15hp, SSW07 Type

WEG WWE-361-BP Starter, 250 hp, To be cut 6" of motor (2) Available

WEG GPH2100QC4000 Soft Start, 100 hp , SSW07 type Soft Start, To be Cut 6" Above and Below (3) Available

250HP, 460VOLT, 1800RPM, EITHER 447T or 445T FRAME, TEFC, INVERTER DUTY, PREMIUM ENERGY EFFICIENT. This motor never ran on the equipment that it was mounded too.

WEG Motor, 100hp, 1790/1490 Rpm, 230/400, 200/400,405T Frame

WEIL-MCLAIN, MODEL 988, steam or hot water boiler. Used in school system approximately 7 years. Good condition. Price includes:  7 sections of cast-iron plates and enclosure with controls. #2 fuel oil fired burner. Technician who removed system and put in a different system available to discuss.  Offered as-is, as removed from service. Price $8,500.00 OBO

2020 Weima WLH 600 Grinder 50 HP motor Vibrating Infeed

2008 Weima WL 6/18.5 V-Rotor Drop Feed Wood Grinder Machine number 500-8876 460V 3 Phase 60 Hz Motor Output- main drive 18.5 KW 1760 rpm Motor Output- hydraulic system 1.5/2.0 KW 21 tools Rotor speed ca.90 Rotor diameter 252 mm Includes spare rotor

Weima WLB 1300 Horizontal Grinder 50 HP Motor System works, not currently in use, will need main bearing replaced.

WEINIG RONDAMAT 931 Profile grinder Specifications -- 9" Arbor length, 11-1/2" max. tool dia., -- 1.5 HP motor, tilting head assembly for back relief grinding, -- Clearance angle on peripheral of tools 10ø - 30ø and to each side 0ø - 20ø.Equipped with & Features -- Variable feed speed via vari-speed gearbox, -- On-board wheel dressing, -- 9" max. wheel dia.; -- 0.16 HP coolant pump. -- Built in coolant tank. -- Retrofitted with axial constant template holder.

WEINIG RONDAMAT R960 Profile Grinder. (HYDRO-LOCK)Specifications: -- Working Dimensions: 9-29/64" -- Maximum tool width; 3-15/16" -- Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive gives a spindle speed of 1,500 to 3000 RPM; 1.5 HP Motor.Complete with & Features -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless -- Precision linear floating table movement feels smooth as if there is zero gravity --Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. -- Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant:13-Gallon coolant tank capacity with 1.2 HP coolant pump. -- Manuals and 1-13/16" arbor and also has a 2-1/8 arbor

Weinig Rondamat 960 Grinder

WEINIG RONDAMAT R960 Profile Grinder. SpecificationsWorking Dimensions: -- 9-29/64" Maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool.Equipped with and Features -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; -- 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity). -- Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. -- Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13-Gallon coolant tank capacity with 1.2 HP coolant pump.

WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs