Sawmill Equipment For Sale
.gif)
3800 Results Found
Call for Price
Design Automation 6' Manual Sticker Stacker, 4 Strand Infeed Deck, Unscrambler with Even Ender, 6' Stacker with Stick Placing Platform & roll Outs. In Place Not Powered.
685 Hr.? ? With a heavy duty clutch and a 10 groove pulley, in Good condition. Here you have power an ready to go at it. Call 217-620-0267
Rebuilt in 2008 300 HP. @ 1800 RPM. Only 8000 HR. A electronic engine with a control box Bellhousing #4 - 14" drive. In very Good Condition. Call 320-983-6543
$ 3,500
150kw Diesel Genset Generator - Back up for current generator but not used - Was operational prior to my purchase - Not hooked up to a bulk tank for demo - Skid mounted - 3 phase 440 v Call 800-459-2148 for more info.
$ 10,000
A Hydraulic unit. 587 hr. 5.43CI per REV, 2900 RPM, 5000 PSI sn# 6A168752RC, In like NEW condition . Call for more info 315- 577-2606
$ 30,000
• Power unit skid • 600-gallon oil tank w/oil • Detroit 12.7L 475HP 60 series diesel engine with heavy-duty clutch & hydraulic pumps • 40 KW belt-drive generator. Good well-maintained unit still used daily. All connected hyd. lines and pumps go along with it. Was used to run a Weinig Hydromat H-2000 moulder and various other hyd. equipment. Would sell as a package deal with the moulder. 570 758 2597
Call for Price
$ 28,500
.jpg?width=300&height=200&mode=pad)
2004 Detroit Diesel MTU 660 KW Generator Skid Mounted 277/480V - 60Hz 540 Hours Digital Controls
Deutz 6 cylinder air cooled Diesel engine. 135 HP with clutch on frame. Call 800-459-2148 for more info.
Call for Price
Hex 45" Whole Log Metal Detector
Call for Price
The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive
Call for Price
Diehl model MR-90 Gang Rip Saw Twelve ( 12 ) inch saw arbor width capacity- Roll feed 50 HP 3600 RPM arbor motor -direct coupled wired 480 volts, 3 phase- new motor bearings 2 HP variable speed feed motor 50 to 150 FPM feed speed-variable Four powered top feed rolls- Excellant feed roll gears 12 inch arbor with one (1) sleeve with spacers Adjustable rip fence Serial number : 66M-1668 Cleaned , checked , and painted
$ 6,850
DIEHL - DMG -12, ...Profile GrinderSpecifications: -- 1/2" Width cap. and 10-1/2" max. cutting circle. -- 1 HP TEFC Motor with 2,260 RPM grinding spindle. -- (2) 1-13/16" Dia.; 16" X-axis & 6" Y-axis table movement. -- 30° Clockwise & 90° counterclockwise base swivel rotation for face grinding of profile cutters or planer knives. -- +30° to -30° Vertical grinding spindle adjustment. -- 2" In & out adjustment. -- 1" X-Axis & 1-7/8" Y-axis template adjustment. -- 7" Min. & 10" max. grinding wheel dia.Equipped with & Features: --Coolant pump with 5-gallon tank.
Call for Price
DIXIE AIR SPB Pulse Jet Dust Collector. -- 16,100 CFM @ 9.5:1 air-to-cloth ratio, round baghouse with (108) cloth filter bags of 12' length resulting in a total approx. 1,695 sq ft of filter media area. -- Ground mounted main Blower with 50 HP motor connected in a negative pressure configuration. -- Automatic reverse pulse cleaning system with differential pressure gauge, positive displacement air pump for pulse clean. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed. -- Walk-In Clean Air Service Plenum. Tangential dirty air inlet. -- Electrical control panel. -- Single cone hopper outlet with 10" Rotary Airlock discharge. -- Horizontal shared transfer auger (about 54' long). -- Steel support structure with access ladder and service platform.Professional disassembly, loading on truck and/or transportation available upon request.NOTE: Unit being sold under this record is pictured on the right side on the first two photos. For the larger diameter unit on the left side (PNEUMAFIL) see record "DO-011265".
Call for Price
The seller has confirmed that this Dixie Air dust collection system is in great working/running condition and it is ready to load! - Size: 108-12 - Type: SPB - 50HP - Inlet to the motor - Circumference: 90"
Call for Price
This system was running daily before hte facility shut down 4-years ago. Buyer will need to provide rigging. (240) 4" x 12' Bags 100 HP Main Motor Bags are cleaned by compressed air approx every minute System is approx 1998 Approx 35000-38000 CFM
$ 2,255
Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.
DODGE gear reducer: 194:1 ratio; 10 HP. Price $900.00. As-is/where-is. (Inv. # G-11).
DODGE gear reducer: 195:1 ratio; 3 HP. Price $850.00. As-is/where-is. (Inv. # G-3).
DODGE gear reducer: 16:1 ratio; 26 HP. Price $600.00. As-is/where-is. (Inv. # G-2).