Sawmill Equipment For Sale

Recently Refurbished 22" Ring Debarker New Controls Optional 22" Metal Detector

42" Salem LP

Salem 6" x 48" Gang Edger w/10' Powered Infeed Rollcase, Knurled Chrome Feed Rolls, Overhead Pneumatic Hold-Down Press Wheels, Hyd Driven, Material Positioners, Hyd Operated 19" Saw Shifting System, Laser Light Shifting System, (1) Laser Light, Controls, 75Hp Motor, 10Hp Hyd Power Pack, T S Manufacturing 24" x 20' Pneumatic Lateral Shifting Edger Outfeed w/(5) Overhead Powered Feed Rolls & No Drive

Salem 6' Headrig This saw was dismantled in 2017 and put in a container. It was never reinstalled. The container is available if someone wants it.

Salem 35" Ring Debarker 5-Knife Current MCC will be used with another line. They may have an MCC to go with it. Indeed/Outfeed Rolls may be optional

6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good working condition

6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition

Salem 6' Band Heading

Salem 54in Air Strain Left Hand Resaw Band Mill, Cartridge Guides, Manual Stop Guide, 1.3 Top / 1.44 Bottom - Call Jeff for more info at 574-370-5050 We can go through this mill if customer needs that. An offbeat bel;t can be added for an additional cast as well.

Salem Top Arbor Gang Rip Saw 8" Capacity 300 HP Motor Blades: Approx 30 Sharpened carbide blades still have wax, and 30 that need to be sharpened Includes: All electrical, misc blades, guides, spacers Included: Milling machine and Babbitt pot System needs a 10 HP feed motor

Salsco 60 " Shaving Mill Diesel engine Stationary Mill No Conveyors Seller believes it is a 2009 or 2010. There is 10 knives ( 5 rows with 2 knives each)

Salsco 60" Electric Shaving Mill Includes:Chip sizer/breaker

SAMUEL TANK-660V-150PSI 660 Gallon Air Receiver660 Gallon Vertical Air Receiver Tank. • Diameter O.D./I.D.: 42 O.D. • MAWP: 150 PSI @ 400° F • MDMT: -20°F @ 150 PSI • Capacity: 660 Gallons • Pressure: 150Support & Attachments: • 8 Base Ring • Safety Valve & Pressure Gauge - 700/MCTK-SW10-150Recommended Option: Zero Loss Compressed Air Condensate Trap w/WindowPowers through Condensate buildup and Ideal for Compressor applications up to 100 HP (500 SCFM).Ideal for inline filters up to 5000 SCFM. • The WaterHog™ design avoids small passages common on competitor designs, ensuring clog-free operation. • Fully Automatic Operations. No timer or manual settings • No Electrical Connections. WaterHog™ is powered by compressed air, avoiding the need for electrical wiring and connections. • Energy Saving Operation. Zero compressed air loss when properly installed with balance line. • Check with your utility to see if it qualifies for energy efficiency incentives. • WaterHog™ pays for itself when replacing open condensate drain valves or timer traps. • Low Profile. • The 4.7" vertical operating height allows WaterHog™ to fit where other larger units can't. • Max Operating Pressure: 200 psig • Min/Max Control Pressure: 40/130 psig • Min/Max Temperature: 34/170 F • Inlet / Outlet Connections: 1/2 inchPrice ...$ 450.00 (2) Year Warranty Included

Samuel Rogers 66" Knife Grinder

KENT - Single Head, ResawSpecifications: -- 15 HP Motor. -- Blade size: 168"; x 1"; x 0.035"; 2TPI. -- 6" Wide feed belt. -- Operational working heights: 1/4" minimum cut to 8"; maximum. -- Feed speed: 20 - 150 Feet per minute.

This mill has been damaged, but if you want good parts there are some here. Call 276-472-2199 for more info.

1984 Sanborn Min Max Wide Band Sawmill with Live Deck. Detroit 271 engine with the largest injectors that are made for that engine. It starts and runs well. Includes: hydraulic drive 3 chain live deck that is about 16' long and 12' wide with a stop and loader and arms that go across the bed of the mill. The logs must be rolled across the arms to the 4 head blocks. The frame of the live deck is mounted on 3x3x3 concrete cubes. set of 4 large head blocks with the same design as the original but which are about 12" large capacity than the originals. 40 foot long 3 chain green chain with new hydraulic motor and large gear reduction unit, 3 saw Chase 24+" edger with a 271 power unit that starts and runs well. 7 bands here and another 5 being repaired. Maintenance and Repairs Done: - balanced both wheels, reground both wheels - removed some weight from the upper wheel - added a weight strain system instead of a small spring - added vibration damping connections - provided electric shut off and throttle to the engine - added an auxiliary open center hydraulic pump and valves. The pump is driven off the front of the crankshaft of the engine - replaced the bearings throughout the mill - strengthened the take away table to take very heavy loads - installed a new set work screw system - removed the pantograph for hydraulic supply and replaced it with an igus hose and cable carrying chain Call 800-459-2148 for more info.

Sanborn Machinery RH 8 Saw Drop Saw Trimmer with Hydraulic Drive

2000 Sanborn Min Max This is not a whole mill. - Two complete good working Silvatech Set works , - Four Heavy Duty Head Blocks . Board Dogs, Cant Dogs, Turners and Tapers all Hydraulic. These were custom built super heavy duty for this mill . Very well cared for. Great care taken in the removal. - Every thing is under cover. - It’s the complete system with everything you need to put it back together, all labeled and photos. - The spare set works was near new when bought. - Everything is on heavy duty pallets can be shipped. Call 800-459-2148 for more info.

Sanborn 6' Left Hand Double Cut Band Head Rig on 17 Degree tilt