Sawmill Equipment For Sale
.gif)
3694 Results Found
.jpg?width=220&height=170&mode=crop)
SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 40 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreEquipped with: -- Conveyor controls -- Shear bar (tapered & serrated)Available NOW!
Call for Price
SELCO - HL-12-LH: Horizontal Baler with Infeed Conveyor• Motor: 20 HP. • Main Cylinder: 6";.• Hopper Opening: 50"; x 28";.• Cycle Time (No Load): 15 Seconds.• System Pressure: 2,000 PSI.• Total Compression Force: 56,556 Lbs.
SELCO - HL50: Horizontal Closed Door BalerSpecifications: -- Large corrugated wide-mouth Baler. -- Horizontal Closed Door. -- Max. amps: Draw 48 amp; max. motor: 39 amp. -- Max HP motor: 30 HP – 60 Hz – 3 phase. -- Bale size: 72″ x 36″ x 48″. -- Feed opening: 50″ x 46″. -- Main pump: 800 PSI. -- Hydraulic pump capacity: 54 GPM. -- Oil reservoir capacity: 180 Gal. -- Cycle time: 20 Sec. -- Ramface pressure: 68 PSI. -- Baling material weight: 1,500 – 1,800 Lbs. -- Bale volume: 72 Cu. ft. -- Main cylinder: 7″ Bore; 62″ stroke. -- Door cylinder: 4″ Bore; 12″ stroke.
Call for Price
SELCO HSO-128A50: Horizontal Auto-Tie Baler -- Type: Open end. -- Cylinder: 8". -- Motor: 50 HP. -- Infeed opening: 36" x 28-1/2". -- Bale size: 30" x 40" x Variable. -- Bale weight: Up to 1,200 Lbs (OCC). -- Production capacity: 2 to 4-1/2 TPH. -- Shear blade. -- Hopper size: 36" x 28-1/2". -- Ram face pressure: 103 PSI. -- System pressure: 2,400 PSI. -- Platen force: 120,637 Lbs. -- Cycle time: 11-1/2 Sec (no load).
2019 Select Sawmill Model 4221 Double Cut 6" Blade 75 HP Electric Motor (600 V/3PH) Includes: Mill, log deck, home built lumber outfeed chain (needs repair) Owner says it is time to grind band wheels again.
Fully functional Spare pumps, motors, hoses, main cable drum and shaft (approx. $5,000 worth of parts!!) Comparable to a 215 Tyrone Berry Oil heater and safety switch in tank
Call for Price
Sering Bar Log Turner 7' Bar
SEVEIN - 12KVA, operates on 50 - 60 Hz, ...Transformer with Neutral wire (on 400 V side). -- General-purpose enclosed, European made, 12 KVA, 3-Phase ventilated Autotransformer. -- Primary 400 V, Secondary 208 - 220 V, 50 - 60 Hz.
$ 1,200
SEW gear reducer: 130:1 ratio; 10 HP. Price $1,200.00. As-is/where-is. (Inv. # G-9).
$ 1,200
SEW gear reducer: 121:1 ratio; 10 HP; UNUSED. Price $1,200.00. As-is/where-is. (Inv. # G-8).
$ 900
SEW gear reducer: 100:1 ratio; 16 HP. Price $900.00. As-is/where-is. (Inv. # G-7).
Call for Price
SHOP BUILT ROLL CASE
Call for Price
Cant Cut Up Line 8'x 9' Infeed Deck, 12' Live Infeed Rollers. 20" Delta Air/Oil Cut Off saw w/7.5HP Electric Motor, 8' Outfeed with air stops (dead)
$ 50,000
High-frequency vacukiln, model is a dx8 will hold 20ft material new in 2014 was revamped in 2018 inside chamber was blasted and coated with special material from sherwinwilliams 3 Phase power Required
Call for Price
Shurman Double Arbor Gang Saw 12" Capacity Thin Kerf Babbit Grinder
Call for Price
.jpeg?width=300&height=200&mode=pad)
Siemens Allic MCC Includes: (1) LA-3200A, 3200A; (6) LA800-AR800NM-H, 800A; Tag: 250424
Call for Price
600 amp Siemens MCC 16 Buckets
$ 4,950
SIEMENS - 75 KVA,... 480 - 380Y/220 Volt 3-Phase Dry Type TransformerSpecifications: -- General purpose: Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 3R ventilated; for indoor or outdoor use. -- Multi-tap (432-504) Primary 480 V (Delta); Secondary 380/220 Volt Y - 60 HZ ventilated. -- Aluminum winding material. -- NEMA Class ANN. -- Catalog # 3F6Y075FCD16.(2) Available; priced per unit; make offer for both!
Call for Price
