Sawmill Equipment For Sale

Square D Sorgel 3 phase general purpose transformer kVA 45

Square D Altivar 58 TRX 300 hp starter

Altistart 46 soft start w/no disconnect

Square D Mod 6 Motor Control Center Bus Rating 600AMP Horz & 600AMP Vertical

SQUARE D - 75T3H, ...75 KVA, 480 - 208 V, 3-Phase Autotransformer Specifications: -- Intended for power, heating, and lighting applications. -- Enclosure Rating: NEMA 2. -- Multi-Tap (432 - 504 V) Primary 480 V (Delta); Secondary 208Y / 120 V @ 60 Hz ventilated. -- Aluminum windings. -- cULus Listed. (2) Available; price per unit. - Make offer for both!

2000 Staiger V29 Slow Speed Grinder Hog, 30HP Electric Motor S/N 200420

STAR V MACHINERY SLG-2000 36 LINEAR V-GROOVER: -- Specifications:Working table dimensions are 120" long x 36" wide; Working width from 4" - 36"; Working length from 20" - infinite; Working thickness from 0.25" - 1.2".Maximum throat clearance for linear & cross-cuts is 15". -- Equipped with: (2) Independent, 12 HP-3,600 RPM Saw Motors with "servo" control adjustment in "Y" axis & manual "Z" axis adjustment.30 mm Dia. Arbor x 4" clamping length to accommodate wider cove back splash, triple-fold profiles, or using it for hogging and finish cut; 9.5" max. cutter-head dia.1-Saw motor is mounted on the front & 1-Saw motor is mounted on the back of the 8" x 12" x 1/2" heat-treated steel heavy-duty overhead support beam.Side to side head travel via linear rails & bearings, manual head height adjustment via linear rails & bearings. -- Feeding System:(1) 3 HP Variable speed drive belt system with "servo" height adjustment; Feed rate from 0 - 60 FPM, belt feeder moves workpiece on a precision "stainless-steel" roller table; -- Tape Applicator: (2) Automatic Tape Applicators with "servo" adjustment, according to the Saw motor position in "Y" axis. -- Operator Interface:10" HDMl Touch Screen Display for Start/Stop, On/Off, Feed Speed & Axis Position. -- Complete with:; Safety guards and Cutter guards. Anti-Kick-back Device. Emergency Shutoff line. Dust collection requirements 4,200 CFM, collector outlets on cutter guards 5" in dia.. -- Options Include:&#9679 Increased Working Width Capacity from standard 36" to 40" (1,016 mm) &#9679 Modify Feeder System to allow 2" Thick Material to pass. &#9679 Increased Cutter Guarding & Motor Shafts to accept tooling & process 2" Thick Material &#9679 (1) 10'x30" (3mx76cm) lnfeed Conveyor &#9679 (1) 10'x30" (3mx76cm) Omni Directional Ball Transfer Table &#9679 (2) Brazed Carbide 90 Degree V Groove Cutter for up to 1" Thick Material &#9679 (2) Rolls of 2" (50mm) wide V-Groove Tape. -- Actual model# is STAR V MACHINERY SLG-2000 40-2".

STAR V MACHINERY SCG-1600 AUTOMATIC CROSS GROOVER + TIGERSTOP TS08 STOP/PUSHER: -- Specifications:(1) Spindle with 7.5 HP - 3,600 RPM motor, 60" max. crosscut cap., material thickness 0.25" - 1.125"; head up & down movement via pneumatic cylinder with linear rail & linear bearings, depth fine adjustment with special threaded adjustable unit. -- Carriage cross-travel powered by a 3 HP hydraulic motor (4GPM), driven ball screw with linear rail & linear bearings; feed rate from 0 - 40 FPM; Heavy Duty welded frame construction. -- Complete with:Safety guards and cutter guards; pneumatic support fence; heavy-duty in-feed & out-feed roller tables. -- Options Include:&#9679 TigerStop TS08, 8' (96") long, NC controlled stop/pusher system, mounted to the LH side of the machine. &#9679 (4) manual flip-stops with Pro-Scale digital readouts, for 60″ of scaled capacity, mounted to the RH side of the machine. &#9679 Reciprocating taping machine is built directly in front of the bed of the cutting area eliminating the need for taping by hand -- Actual Model is STAR V MACHINERY SCG-1600 AUTOMATIC CROSS GROOVER + TIGERSTOP TS08 STOP/PUSHER.

STEEL FAB 300 Gallon Vertical Air Receiving TankSpecifications: -- Tank size 30" Dia. x 5-1/2' H.

STEEL FAB 400 Gallon Vertical Air Receiving TankSpecifications: -- Tank size 36" Dia. x 6' H.

120 Gal. Vertical Air Receiver Tank. -- ASME / NB code for 200 PSIG max. working pressure. -- Equipped with 1/2" safety relief valve (#141478), pressure gauge (#P-500) and manual drain with fittings for installation (shipped loose). -- Primed exterior; approx. weight 260 Lbs.

Stehle 5802 Profile Grinder

Stenner VHC Resaw Accepting offers

Stenner Resaw VHJ Size 105 S/N 8700

Stenner 36" Bandsaw, older unit but was running when pulled out of production.

Sterling Blower with 25HP Electric Motor Shop #744

15 HP Dust System

Stetson-Ross Model 372 Heavy Duty Grinder/Jointer

Stetson Ross Kerf Saver Resaw Recrowned band wheels New starter Work ready Only gets used a few times a year and no longer need it

Stetson ross profile grinder