Sawmill Equipment For Sale
.gif)
3836 Results Found
Call for Price
Jeffrey Rader 1500 HP Wood Hog Model 610 WLE Endurahog
Call for Price
.jpg?width=300&height=200&mode=pad)
Jeffery Hammer Mill with infeed conveyor and extra hammers. 125hp motor
Call for Price
Jeffrey Hammer Mill 30WB S/N 14168
Call for Price
Jeffrey 34WB Hammermill Hammer Hog S/N 11979, Top opening is 21" x 33", Bottom discharge, No drive, Includes 35" x 55" x 60" tall Hopper
Call for Price
Jeffrey 30AB Hammer Mill with GE 50hp Motor, Top Infeed, Bottom Discharge
Call for Price
Jeffrey 36x36 HOG s/n 11136
$ 13,750
Jeffrey vibrating conveyor, 18" wide pan x 36' long, 6" tall sides, electric drive, good working condition
Call for Price
Jeffery Hammermill 34x24 w/125hp motor
$ 5,500
JENKINS R Dowel Milling Machine; 1/4" to 2-1/4" Dia. capacity.Specifications: -- 4-Knife adjustable cutter head. -- 15 HP main motor - 3,600 RPM. -- Top & bottom in & outfeed rollers. -- Feed speeds 60-90-100-120 FPM, both forward and reverse, 2 HP feed motor. -- Note: Machine includes a 4-knife head which is adjustable up to 1-1/2" in diameter.Note: Check out the attached literature for better illustration and details.
JET JC-3CF Cyclone Dust CollectorCyclone action separates the heavier chips and particles and disposes of them into a 55-gallon drum. -- With its large 8-fin, 14" steel impeller it creates high velocity air flow that allows the lighter dust to pass through and be trapped in the filter. -- The filter bag provides almost 40 sq. ft. of filtration surface area for all dust particles 5 micron and larger. -- The collection bags have the "Snap-In" design for quick and easy installation and removal. -- The use of our "EXCLUSIVE" pressure tube allows the use of a plastic collection bag in the drum without the bag getting sucked up into the cyclone. -- The special rectangular inlet pipe gives added separation and additional air flow. -- The steel construction with welded seams and powder-coated paint ensures long, dependable performance.
Call for Price
Jocar MDL 1600-23063 Horizontal Resaw System w/125HP Motor, 40' Outfeed Rollcase, Infeed Power Pack, Tipple System, Infeed Rollcase, Cant Positioner, Cant Turner, 20HP Hyd Power Pack, 50HP Power Pack System, Cleereman 5' x 6' Control Cab & Computer Setworks.
$ 185,000
MUST BE ORDERED FROM FACTORY. VERTICAL ARBOR SLAB RECOVERY GANGS are designed to process 3 sided slabs into pallet boards. Ten (10) vertical, interior feed rolls are standard. Variable speed feed system up to 175 FPM. 2" automatic cant variance allows both 3 1/2" and 5 1/2" wide cants to be run back to back with no operator involvement or machine adjustments. Machine utilizes one bottom "clean-up" saw to eliminate irregular shaped pieces assuring flat, square pallet boards. 30" to 60" lengths. Can be partnered with a slab edger and trimmer to recover boards with NO operators. PRICES RANGE FROM $185,000 to $215,000 depending on the model and options.
$ 40,000
JOCAR BAND SAW: Model 1600/230; very heavy duty rectangular tubing column; 63" diameter wheels with wheel guards; right hand machine; vertical sawing; 9" face width; kerf approximately .125"; pressure guides; complete with 125 HP electric motor, drive and guard; hydraulic strain; top wheel tilt and hydraulic power unit. Price includes loading onto your truck. PRICE $35,000.00.
Call for Price
John Deere 544D Wheel Loader w/Forestry Package, Pin On Fleco, Log Grapple Attachment, Open ROPS & Shows 3,835 Hrs
$ 27,500
TC54 John Deere Loader with 4' JRB Quick Couple Forks. (sn: DWTC54H570468) 26,344 hours. Well Maintained. Contact Zach: 931-224-0699
Call for Price
200kw John Deere Gen Set, 8.1 Engine with Marathon Generator, model 432RSL4009, 3848 hrs
Call for Price
John Deere 844K Wheel Loader
Call for Price
John Maye D-53 Semi Automatic Strapping Machine S/N 84763
Call for Price
175 KW -175 KVA 264 amps at 460v John Deere diesel powered 460v - 208v - 115v outlets housed in a container with ample access doors