Sawmill Equipment For Sale

Morgan chop saw, line shaft ready, 22" dia blade, includes 1 extra blade 10' infeed/5' outfeed, good condition and ready to work

Morgan 2 Head Resaw 12 x 12 Grade 480 Volt 3 Phase with 50HP Motors, On board HPU. 4" Bands.

Morgan Scragg Mate Edger 20hp on Saw Arbors

Morgan 2 Saw Edger

Morgan Mini Champ 4 Saw Edger

MORGAN Small Log Cutoff Saw - cuts up to about 14" diameter. Includes self contained hydraulics and controls. Infeed included, no outfeed.

Good used Morgan Chopsaw, feeds from right to left. Ready to cut.

New Morgan 20’ Chop Saw. Includes Descrambler and scrap conveyor. 15HP saw

Morgan Double End Trim Saw

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice. Length: 22' 1"; Width: 11' 3"; Height: 8' 2"

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice.

MOSCA - RO-MF-4-125/155, 49" W x 61" H Bottom Seal Semi-Automatic Strapping Machine!Specifications: -- Conveyor line space: Approx. 20". -- Table height: 16" - 20". -- Strapping speed: Approx. (30) straps/Min. -- Strap widths: 5 mm (0.20"); 6 mm (0.24"); 8 mm (0.31"); 9 mm (0.35") & 12 mm (0.47"). -- Max. infinitely adjustable strap tension: 80 Lbs. -- Strap material: Machine grade polypropylene.Equipped with: -- Fully enclosed 1-piece strap track with: 4-Point cam-actuated opening. -- Automatic strap feeding. -- Electronic strap tensioning, with DC Motor. -- Electronic temperature-controlled heat-seal strap seal. -- Automatic strap loop ejection. -- Automatic coil-end detection & Ejection. -- Cycle counter. -- (3) Swivel locking casters.

MOSLEY HARRIS Series AP 16/13 2-Ram Horizontal BalerSpecifications: -- Main cylinder: 16" -- Eject cylinder: 13" -- Main motors: (2) 100 HP -- Feed opening: 86" x 20"Equipped with: -- Liner Plates are roughly appx. 50% and evenly worn floor. -- Strapper is a 330 Model, but still works very well. -- Baler has been used primarily for OCC and ONP.

MOSLEY - HBLA111-200S-4-AP-12/9-BRD, ...2-Ram Horizontal BalerSpecifications: -- Main motor: 200 HP -- Feed opening: 60" x 120" -- Bale size: 31" 62" x 44" -- Production capacity: 24 TPH OCC -- Main cylinder: 12" -- Eject cylinder: 9" -- Platen force: 98 tons -- Ram face pressure: 227.5 PSI -- OCC weight: 1,400 Lbs -- Non-ferrous: 1,600 Lbs -- Solid waste: 2,300 Lbs -- Plastic: 1,500 LbsEquipped with: -- Shear blade -- Wire Tier -- Photo-eye -- Release door

MSI - AT-643, ...Horizontal Auto-Tie Baler with Infeed ConveyorSpecifications: --60" x 43" feed opening --Bale size: variable x 43" x 30" --Bale weights: 900-1700 pounds. OCC" 5 TPH --7" cylinder repacked --40 HP --New hydraulic pumps, New T-1 Liners on floor and platen. --60" wide x 25 feet long slider bed conveyor included

Harp Series machining Center for long and narrow parts! Available in 4 or 5 axis systems. Robotic material handling options! The HARP Series, specifically designed for processing High Aspect Ratio Parts (long & narrow parts), is typically customized with Clamping Fixtures and Spindle Configurations specific to the parts being manufactured. With the ability to operate with up to four (4) independently and simultaneously controlled cutting heads, the HARP machines increase throughput of up to 10 times compared to traditional CNC machines. In the door & window industry HARP machines can be found producing over 1,600 door jambs per 8-hour shift with fully automated load/unload systems.

MULTIQUIP GENERATO MODEL DH-04801 45KW GENERATOR IS ON A 2004 DUOLIFT TRAILER WITH ON BOARD FUEL TANK LOW VERY QUIET GENERATOR

MULTISCORE CD-4-30 CABINET GROOVER: -- Specifications:30" Wide x 50" long max. cap., 1" max. material thickness; 30 HP main motor; 3-15/16" dia. arbor @ 3,500 RPM; aluminum bedplate slotted at 1-1/2" spacing for about (20) tool positions; quick release tensioner on the arbor drive belts. -- Equipped with: Feed System: Reciprocating push fence with wood extension fingers to assure consistently square cuts; push fence carries the part through the entire cutting area completely past the arbor. Extension fingers are laterally adjustable for different cut widths. Pneumatic infeed plastic holdover fence laterally adj. to hold parts up against the fence. (8) Hold-down arms with lateral & vertical adjustment mount to a T-slot rack to press parts against the feed table during machining. -- Feed Drive/Speed: 2 HP - 1,750 RPM AC Inverter; variable feed motor via gear motor, with dynamic brake; 0 - 60 FPM. Features: -- Material is pushed off the exit side while machine operator can load new parts at the infeed table. Cutterhead assembly is end supported, adjustable up & down via handwheel, and jam nut tooling locking system. -- NOTE: This machine is currently setup for wainscoting and kitchen cabinet doors.

Multitek 40KW Generators: 40KW 3-phase 240 volt generators (8 available). All have approximately 27 hours of testing. These are new units available for $16,000 each.

Main fan motor 20 HP RAL opening 14” Electrical panel Auto shaker filter cleaning Inlet pipe size 14” Number of filters 63