Sawmill Equipment For Sale
.gif)
3591 Results Found
.jpg?width=220&height=170&mode=crop)
$ 10,900
Accepts material up to 12" x 12" and uses a 12"-wide conveyor Main Drive Motor: 30 HP TEFC Variable feed speed from 0-95 feet (0-29 m) per minute 28" Dynamically balanced solid metal band wheels 4" diameter dust outlet requires 500 CFM REDUCED LOW HOUR MILLWORK MACHINE
Call for Price
BAKER ABX Single-head Horizontal Resaw The Baker "ABX" Band Resaws are designed to save space but give you the same great features of larger band resaws.Specifications: -- 12" x 12" Cut cap.; 28" precision machined wheels and 30 HP TEFC motor for main drive (40 HP optional); 2 HP hydraulic feed system with a 10-gallon reservoir, flow control valve for variable feed speed of 0 - 95 FPM; with filter, & remote feed shut off, and powered infeed. -- Features: -- Powered head rise/fall system with 40:1 ratio; endless flat belt infeed w/floating overhead feed rollers, each is hydraulically powered; spring blade tensioning. -- 3/4" - 12" Cutting width, 1/4" - 12" cutting height, uses 0.035" x 1" x 14'-2" blade length; BAKER flat guides for higher production, accuracy & extended blade life. -- Includes: -- Hydraulically-powered infeed hold-down.
Call for Price
Single head Baker resaw | 3 Phase 480V | 30HP | Capacity is roughly 6" wide x 6" tall
$ 15,000
$ 75,000
SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRICE INCLUDES A COMPLETE REBUILD AND A FULL WARRANTY!
$ 14,000
.jpg?width=300&height=200&mode=pad)
12" Baker BBR-O Single Head. 30hp Motor. Located in IA. #C968
Call for Price
.jpg?width=300&height=200&mode=pad)
Call for Price
12" capacity 25HP motor 460 volt 3-phase
Call for Price
Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity
$ 10,500
.jpg?width=300&height=200&mode=pad)
Baker C Resaw with Return. Located in NY. #C929
$ 35,900
2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895
Call for Price
Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide
Call for Price
Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.
$ 7,500
$ 65,000
1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive
Call for Price
Baker Furnace Dry Kiln 110volt 3 phase Excellent condition
Call for Price
Brand new...never used...still on the original pallet.
Call for Price
Baker PAQ Resaw Good Working Condition
Call for Price
Baker Furnace Inc Dry Kiln 3 phase 110V
Dry Kilns (cream), Conventional Heating System, 600,000 BTU Propane, single phase, 120V control voltage, 3 phase 208V motor voltage, open volume: 672 cubic feet, max operating temperature: 500F, owners manual included, excellent condition, 2 units available