Sawmill Equipment For Sale

Band Mills (Wide) (42) Band Mills (Thin Kerf) (54) Debarkers (79) Edger-Boards (63) Forklifts (44) Gang Saws (53) Hogs and Wood Grinders (246) Log Loaders (1) Portable Sawmills (32) Resaws-Band (166) Scragg Mills (36) Trim Saws (83) Unscramblers (33) Wheel Loaders (94) Wood Chippers - Stationary (143)
Air Compressors (157) Airlocks (24) Banding-Strapping Machines (139) Blowers and Fans (132) Boilers (25) Bolter Saws (1) Carriages (Sawmill) (29) Carriage Drives (Sawmill) (57) Chip Bins (18) Chip Cyclones (22) Chip Screens (40) Chipping Canters (3) Chop Saws (65) Circular Saw Husks (9) Circular Sawmills (80) Conveyors (81) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (205) Conveyors General (30) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (53) Conveyors Belts (206) Conveyors-Barn Sweep (24) Conveyors-Live Roll (119) Dip Tanks (4) Drum Dryers (20) Dry Kilns (50) Dump Hoppers (8) Dust Collection Systems (263) Edger Tailing Devices (6) Edgers-Gang (46) Edgers-Slab (6) Edgers-Vertical (5) Electrical (158) Fuel Tanks (2) Gang Rip Saws (115) GenSets (29) Hammer Mills (6) Hydraulic Power Packs (94) Knife Grinders (35) Laser Lights (8) Log Home Machinery (14) Log Merchandising Systems (13) Log Turners (Sawmill) (35) Lumber Carts (20) Lumber Sorters (9) Lumber Stackers (28) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (36) Misc (91) Operator Cabs (32) Package Saws (1) Parts and Parts Machines (10) Plywood OSB and Panel Boards (3) Post and Pole Peelers (21) Power Units-Engines (13) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (54) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (116) Shavings Mills (21) Slab Saws (13) Stake Pointers (1) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (16) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 42 of 190
3796 Results Found
Sort By 
Recently Added Items
1998 Summit PR-9S
Call For Price
1998 Summit PR-9S
2022 Riehl Steel 2ohp
$12,500
2022 Riehl Steel 2ohp
Caterpillar 3304
$20,000
Caterpillar 3304
Unknown
$12,500
Unknown
$ 2,399

EXTREMA DC-240.1 TYPHOON Fabric Filtration Dust Collection System. -- Powerful, portable, and affordable dust collector with roll around casters mounted to a steel platform base. -- (2) Oversized Fabric filter top bags, approx. 75 sq. ft.filter area, are placed above plastic collection bags, approx. 18.85 cu. ft. storage capacity. -- 3,950 CFM Output with single-stage blower. -- 5 HP Induction motor. -- Filter bags filter dust particles down to (5) Micron in size. -- Main inlet 10" or dual 4" adapter.

Bernie Straple
800-374-5009 ext:339
Call

$ 4,599

EXTREMA DC-3075.1 TYPHOON Fabric Filtration Modular Dust Collection System.With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 4,550 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 7.5 HP motor with push button control and motor starter. -- 13.5" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit.

Bernie Straple
800-374-5009 ext:339
Call

$ 2,399

EXTREMA DC-203.1 TYPHOON Cyclone & Fabric Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter. -- (1) Fabric filter bag placed above plastic collection bag. -- 1,785 CFM Output. -- 3 HP Induction motor. -- 13" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bag filters dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Sturdy steel tripod cyclone mounting stand and drum dollies (drum not included.)

Bernie Straple
800-374-5009 ext:339
Call

$ 8,999

EXTREMA DCY-1000 TYPHOON Cyclone Dust Collector. Cyclone & fabric filtration Dust Collection System. -- Powerful 2-stage dust collection drops out heavier dust particles through a 1/2 HP Rotary Air Lock with 10 CFM capacity, allowing you to choose the disposal system, before passing finer particles through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags; air volume output rated @ 6,400 CFM. -- Equipped with: 10 HP Induction motor, 16" steel blower fan impeller and is dynamically balanced and 12" inlet. -- Includes: Collection bag snap-in ring for easy addition or removal of plastic bag; filter bags filter dust particles down to (1) Micron in size; low noise operation. -- Supplied with: Heavy Duty support frame to allow usage with a waste hopper under the Cyclone.

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

EXTREMA DCF-327 Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- For indoor use. (Enclosed outdoor unit available). -- Excellent addition to the "DCY Typhoon" Dust Collector

Bernie Straple
800-374-5009 ext:339
Call

$ 1,999

EXTREMA DB-50.3 TYPHOON BLOWER. Capacity 5 HP, 3,200 CFM. -- Solid heavy gauge steel construction. -- Heavy duty dynamically balanced steel impeller, 10" inlet, 13" impeller, 12" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. - Complete with magnetic starter. -- Note: 460 Volt available

Bernie Straple
800-374-5009 ext:339
Call

$ 9,999

EXTREMA DC-4100 Baghouse Dust CollectorThe "DC-4100" baghouse dust collector is designed to achieve maximum airflow with a superior filtration area. This is achieved by using (36) smaller diameter filter bags to have more filter media in the same space as other similar dust collectors of its size. More filter area means better airflow with less filter maintenance. A manual bag shaker is included.The DC-4100 meets the NFPA664 CFM requirements for indoor dust collectors. The compact design allows this maximum filtration unit to use a depth of less than three and one half along a wall. The 10HP main motor has a dynamic balanced impellor and a magnetic starter is included.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 361 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (36) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 12".

Bernie Straple
800-374-5009 ext:339
Call

$ 23,000

EXTREMA - DCY-1220 L3 TYPHOON: Cyclone Filtration Dust Collection System. -- Powerful 2-stage dust collection drops out heavier dust particles through a Rotary Air Lock, allowing you to choose the disposal system before passing finer particles through the fan and filter. -- Air volume rated @ 8,800 CFM. -- Unit includes: 20 HP Motor with a Soft Start already wired in. -- Rotary air lock with: 1 HP Motor @ 38 CFM. -- Low noise operation. -- Standard support frame: LEG 3; 164" clear height x 149" clear width x 91" clear depth. Includes after filter Baghouse DC-327E. Features: 16" Inlet; (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) micron filter. -- Unit is enclosed.

Bernie Straple
800-374-5009 ext:339
Call

$ 6,499

EXTREMA DC-2100 TYPHOON Cyclone & Fabric Filtration Dust Collection System.Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter.Specifications: -- (2) Fabric filter bags placed above plastic collection bags with 117 Sq. Ft. total cloth area -- 32 Cu. Ft. of storage capacity -- Rated at 6,400 CFM at 16" static pressure output. -- 10 HP Induction Motor. -- Inlet 13" with 16" Steel blower fan impeller that is dynamically balanced.Features: -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter out dust particles down to (1) Micron in size. -- Low noise operation. Includes: -- Sturdy steel tripod cyclone mounting stand and drum dollie (drums not included).

Bernie Straple
800-374-5009 ext:339
Call

$ 2,989

EXTREMA RC-04 Rotary Air Lock Standard capacity Rotary Air Lock; Cycles waste off of a cyclone dust collector while maintaining internal pressure.Specifications: -- The Rotary Air Lock is an essential device for dust collectors that dump directly into a dumpster or hopper. -- This unit has a 16" dia. lock with a 1/2 HP motor. -- 33 RPM TEFC Direct drive motor. -- 16" Inlet dia. & 16" outlet diameter. -- (8) Rubber blades. -- Does not include electrical controls. -- Features: Approx. 10 Cu. Ft./Min capacity.

Bernie Straple
800-374-5009 ext:339
Call

$ 4,699

EXTREMA RC-10 Air Lock Standard capacity Rotary Air Lock; Cycles waste off of a cyclone dust collector, while maintaining internal pressure. -- The Rotary Air Lock is an essential device for dust collectors that dump directly into a dumpster or hopper. -- This unit has a 16" dia. 1 HP - 33 RPM TEFC Direct drive motor -- 16" inlet dia. & 16" outlet dia. -- (8) rubber blades. -- Does not include electrical controls. -- Features: 38 Cu. ft./min. cap.

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

EXTREMA DCF-04 Bag Filter. -- Features a 14" inlet; unit has (4) sections, (4) 1 micron filter bags with (4) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

EXTREMA DCF-05 Bag Filter. -- Features a 16" inlet; unit has (5) sections, (5) 1 micron filter bags with (5) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!

Bernie Straple
800-374-5009 ext:339
Call

$ 600

FALK gear reducer: 13:1 ratio; 52 HP. Price $600.00. As-is/where-is. (Inv. # G-10).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 850

FALK gear reducer: 25:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-1).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 850

FALK gear reducer: 40:1 ratio; 10 HP. Price $850.00. As-is/where-is. (Inv. # G-5).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 950

FALK gear reducer: 40:1 ratio; 10 HP. Price $950.00. As-is/where-is. (Inv. # G-6).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 600

FALK gear reducer: 8:1 ratio; 15 HP. Price $600.00. As-is/where-is. (Inv. # G-4)

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 4,500

Fast-Line sawyer/ operator cab, 5' x 10' x 6' tall, nice large size, good condition

Showcase Equipment
260-250-4645
Call

Call for Price

Fas Trac Band Mill with 20 HP Electric Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved