Sawmill Equipment For Sale

Salem 6' Headrig This saw was dismantled in 2017 and put in a container. It was never reinstalled. The container is available if someone wants it.

6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition

6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good working condition

Salem 4'x11.5' Steel Insulated Sawyers Control Booth w/ Air Conditioning

Salem 7' Full Air Strain Vertical Head Band Saw with 26"x7' Slatted Offbreaker

SALEM operator's cab; approximately 5' wide x 10' long x 8-1/2' tall; with seat and A/C on top (adds 18" to height); no window on one side; rear entry, 30" door.  Offered as-is/where-is, as removed from service.  No warranties or guaranties. Price $7,000.

Salem 25hp Electric / Hydraulic Power Unit

Salem 7.5 hp Electric / Hydraulic Power Unit

Salem Linebar Resaw Runaround includes: 52in X 15ft in Feed Rollcase with Positioners & Log Turners, 54" X 35' Outfeed Rollcase with 2-Way Chain Jump Transfers, 12' X 14.5' 5-Strand Transfer Deck with 10' X 11.5' 4 Strand Camelback Chain, 12' X 10' 4 Strand Cant Lowering Deck with Air Stops & Board Tipples, 12' X 14' 4 Strand Transfer Deck, 5 Strand 180° Transfer Return Deck into 11.5' X 15.5' 5 Strand Deck W/ Hydraulic Stops, Flippers & Pin Stops All with Electric Drive

SALEM Cab Controls

36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00

8" x 54" SALEM, bottom arbor, combination gang-edger. Center section only.  Split machine. New solid feed rolls-chromed and knurled. New top press rolls-smooth-split 33" and 15" wide. (4) new 5" bore cylinders for press rolls.  3 7/16", double keyed, saw mandrel.   Hydraulic feed.  Saw shifting device outside of frame but no saws or collars but with shifting arms.  3 sets rubber cushions on press rolls.  All sprockets are new with hydraulic drive.  No infeed or outfeed. 125 HP motor included. No plumbing or electric wiring.  New bearings on feed rolls.  20HP hydraulic power unit. Machine mounted on 6" beam. Price $35,000.00

Features 2 equidistant shifting saws ball bearing shifting collars Temposonic hydraulic linear positioned saws Knurled and chromed feed rolls blade access on left belt tailing device dead roll infeed Programmable push button controls and jog to position controls arbor motor hydraulic unit

Thin kerf top arbor gang with infeed and outfeed. Features 300 HP arbor motor access door on left splined arbor guide lube system babbitt pot Salem double side guide milling machine lots of guides lots of saws soft starters control console Infeed features: 3 cross chains cant turner crowder roll

Salem 35" Ring Debarker 5-Knife Current MCC will be used with another line. They may have an MCC to go with it. Indeed/Outfeed Rolls may be optional

Salsco 60 " Shaving Mill Diesel engine Stationary Mill Seller believes it is a 2009 or 2010. There is 10 knives ( 5 rows with 2 knives each)

Salsco 60" Electric Shaving Mill Includes:Chip sizer/breaker

SAMUEL TANK-660V-150PSI 660 Gallon Air Receiver660 Gallon Vertical Air Receiver Tank. • Diameter O.D./I.D.: 42 O.D. • MAWP: 150 PSI @ 400° F • MDMT: -20°F @ 150 PSI • Capacity: 660 Gallons • Pressure: 150Support & Attachments: • 8 Base Ring • Safety Valve & Pressure Gauge - 700/MCTK-SW10-150Recommended Option: Zero Loss Compressed Air Condensate Trap w/WindowPowers through Condensate buildup and Ideal for Compressor applications up to 100 HP (500 SCFM).Ideal for inline filters up to 5000 SCFM. • The WaterHog™ design avoids small passages common on competitor designs, ensuring clog-free operation. • Fully Automatic Operations. No timer or manual settings • No Electrical Connections. WaterHog™ is powered by compressed air, avoiding the need for electrical wiring and connections. • Energy Saving Operation. Zero compressed air loss when properly installed with balance line. • Check with your utility to see if it qualifies for energy efficiency incentives. • WaterHog™ pays for itself when replacing open condensate drain valves or timer traps. • Low Profile. • The 4.7" vertical operating height allows WaterHog™ to fit where other larger units can't. • Max Operating Pressure: 200 psig • Min/Max Control Pressure: 40/130 psig • Min/Max Temperature: 34/170 F • Inlet / Outlet Connections: 1/2 inchPrice ...$ 450.00 (2) Year Warranty Included

Samuel Rogers 66" Knife Grinder

KENT - Single Head, ResawSpecifications: -- 15 HP Motor. -- Blade size: 168"; x 1"; x 0.035"; 2TPI. -- 6" Wide feed belt. -- Operational working heights: 1/4" minimum cut to 8"; maximum. -- Feed speed: 20 - 150 Feet per minute.