Sawmill Equipment For Sale

Customer has two SCMI M3 rip saws for sale. One is fully functional and is a parts machine. It functions but the head will not move up.

SELCO - HS0-128A, ...Horizontal Auto-Tie Baler -- Motor: 50 HP -- Cylinder: 8" -- Feed Opening: 36" x 28" -- Conveyor NOT included -- Loaded onto your Truck

SELCO HL60-M Horizontal Closed Door BalerSpecifications: -- Full Penetration. -- Motor: 30 HP. -- Cylinder: 8". -- Feed Opening: 60" x 45". -- Shear Blade. -- Bale Size: 48" x 40" x 72". -- Max: 2,100 Lbs OCC. -- Feeding Cleated Motorized Belt Conveyor: 20' L x 36" W. -- Loaded onto your Truck.

SELCO HSO-128A50: Horizontal Auto-Tie Baler -- Type: Open end. -- Cylinder: 8". -- Motor: 50 HP. -- Infeed opening: 36" x 28-1/2". -- Bale size: 30" x 40" x Variable. -- Bale weight: Up to 1,200 Lbs (OCC). -- Production capacity: 2 to 4-1/2 TPH. -- Shear blade. -- Hopper size: 36" x 28-1/2". -- Ram face pressure: 103 PSI. -- System pressure: 2,400 PSI. -- Platen force: 120,637 Lbs. -- Cycle time: 11-1/2 Sec (no load).

SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 40 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreEquipped with: -- Conveyor controls -- Shear bar (tapered & serrated)Available NOW!

SELCO - HLO-608-A40: Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72";. -- Main motor: 50 HP. -- Cylinder: 8". -- Twister motor: 2 HP. -- Cooler motor: 2 HP. -- (4) Tension cylinders: 5" Bore.Available NOW!

SELCO - HL-12-LH: Horizontal Baler with Infeed Conveyor• Motor: 20 HP. • Main Cylinder: 6";.• Hopper Opening: 50"; x 28";.• Cycle Time (No Load): 15 Seconds.• System Pressure: 2,000 PSI.• Total Compression Force: 56,556 Lbs.

SELCO - HL50: Horizontal Closed Door BalerSpecifications: -- Large corrugated wide-mouth Baler. -- Horizontal Closed Door. -- Max. amps: Draw 48 amp; max. motor: 39 amp. -- Max HP motor: 30 HP – 60 Hz – 3 phase. -- Bale size: 72″ x 36″ x 48″. -- Feed opening: 50″ x 46″. -- Main pump: 800 PSI. -- Hydraulic pump capacity: 54 GPM. -- Oil reservoir capacity: 180 Gal. -- Cycle time: 20 Sec. -- Ramface pressure: 68 PSI. -- Baling material weight: 1,500 – 1,800 Lbs. -- Bale volume: 72 Cu. ft. -- Main cylinder: 7″ Bore; 62″ stroke. -- Door cylinder: 4″ Bore; 12″ stroke.

Select 3620 Sawmill Approx 1100 Hours 68 HP John Deere Diesel Engine 4" Blade (Double cut) 32" Band Wheels Hydraulics include: Log Turner, (2) back posts, (2) dogs, (2) tapers, blade tensioning, head lift, carriage feed Frame: 2"x8" frame and crossbars supported by (2) adjustable legs Blade Lubrication: Automatic electric lube Log capacity: 36" Diameter x 20' Long Setworks: (2) Preset and (2) hold/recall buttons Hydraulic rollers on tapers John Deere block heater Lumber offloading platform Trailer package

48" long, bar type, good condition

Fully functional Spare pumps, motors, hoses, main cable drum and shaft (approx. $5,000 worth of parts!!) Comparable to a 215 Tyrone Berry Oil heater and safety switch in tank

Sering Bar Log Turner 7' Bar

SEVEIN - 12KVA, operates on 50 - 60 Hz, ...Transformer with Neutral wire (on 400 V side). -- General-purpose enclosed, European made, 12 KVA, 3-Phase ventilated Autotransformer. -- Primary 400 V, Secondary 208 - 220 V, 50 - 60 Hz.

SEW gear reducer: 130:1 ratio; 10 HP. Price $1,200.00. As-is/where-is. (Inv. # G-9).

SEW gear reducer: 121:1 ratio; 10 HP; UNUSED. Price $1,200.00. As-is/where-is. (Inv. # G-8).

SEW gear reducer: 100:1 ratio; 16 HP. Price $900.00. As-is/where-is. (Inv. # G-7).

SHOP BUILT ROLL CASE

Cant Cut Up Line 8'x 9' Infeed Deck, 12' Live Infeed Rollers. 20" Delta Air/Oil Cut Off saw w/7.5HP Electric Motor, 8' Outfeed with air stops (dead)

High-frequency vacukiln, model is a dx8 will hold 20ft material new in 2014 was revamped in 2018 inside chamber was blasted and coated with special material from sherwinwilliams 3 Phase power Required

Shurman Double Arbor Gang Saw 12" Capacity Thin Kerf Babbit Grinder