Sawmill Equipment For Sale

Mellott 12ft Slab Drop Belt

Duct work as pictured Make a reasonable offer For new applications please call for layout assistance and pricing!!

Assorted sizes and Features as pictured. heavy duty wielded construction made in USA 60” and 84” filter bag heights please call for pricing upon application

ATLANTIC X-5 MODULAR DUST COLLECTION SYSTEM:Specifications: -- Rated @ 3,500 CFM with 5.5" static pressure W.G.; -- (16) 8" x 60" Poly Twill cloth "Quick Release" filter tubes, approx. 440 sq. ft. total cloth area; Discharge to (3) plastic bags. -- Equipped with: 5 HP - 3,500 RPM Blower drive centrifugal fan assembly, anti-spark cast impeller; 13.3/4" inlet dia. -- System includes 230 Volt (factory installed) magnetic starter. -- X-Series Dust Collectors are compliant with NFPA Regulations 664 and 654 for enclosure-less dust collectors.Very strong draw. Quiet. Includes 60 feet, ($2,000) quick clamp disconnect pipes.

Assorted flanges as pictured make a reasonable offer

ATLAS COPCO GA-30 FF Rotary Screw Air Compressor w/DryerSpecifications: -- 40 HP - Approx. 187.4 CFM at 125 PSI, single-stage oil-injected rotary screw air-end & totally self-contained. -- Standard features: -- Inlet air filtration, oil injected lubrication, long-life RDX (Roto Duty Extend) synthetic oil; direct-on-line motor starter, and drain trap. -- Equipped with: -- Elektronikon Operator display panel, PLC controller, with pressure gauges, control mode selection, and hour meter. -- Includes: -- Built-in Refrigerated Air Dryer.

ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 13,975 Run Hrs. & 9,704 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.

ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 15,985 Run Hrs. & 11,072 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.

Atlas Copco GA-18 Screw Compressor S/N AII 260972 125PSI

Atlas Copco GA7 Screw Compressor S/N AII 134402 132PSI

Atlas Copco GA37 220PSI 50HP Compressor

Altas Model GX11FF 15 HP Compressor 3,580 Hours

Atlas Copco 100HP ZE 4 Combustion Air Blower

Atlas Copco SF2 Air Compressor with 18,750 Hrs

Atlas-Copco FD345 Air Dryer S/N 300197

AUTO-V-GROOVE AVG-48 MFT UNIVERSAL V-GROOVER: -- Specifications:(1) Head automatic cross & linear V-Groover, 48" max. material width on cross-groove,Unlimited length for linear grooving, 1-1/4" max. material thickness. -- Features:(1) 10 HP - 3,600 RPM Motor, 30 mm dia. belt driven precision cutter arbor, 3-1/4" max. cutter width.2 HP Hydraulic feed motor for infinitely variable crosscut feed speed from 0 - 50 FPM & 0 - 60 FPM for linear feeding.Heavy-duty double belt feeder assembly for linear grooving. -- Includes: Adjustable pneumatic material hold-down bar.(1) 84" x 24" Main table, (1) 20" x 58" auxiliary table, (1) large 96" long floating table on rails. -- Complete with: Automatic tape applicator (12" max. dia. tape roll), manual quick crank tape applicator positioning system. -- Options Include: An assortment of V-Groove cutters as pictured.Actual Model is AUTO-V-GROOVE AVG-48-M/FT.

AUTOQUIP 36S80 DL Double Long Scissor Lift.12,000 Lbs. max. cap. with standard 24" x 98" smooth steel platform top. -- 36" Travel with a 7-1/4" height and 43-1/4" raised height; (35) Sec up and down speed. Base frame 24" x 98". -- Power unit with 5 HP remote Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Options; Guarded foot pedal control, Accordion skirt, larger platforms available. NOTE: Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S40 Scissor Lift.4,000 Lbs Cap., Electro-hydraulic operation. -- 36" x 60" smooth steel platform . Base frame is 24" x 48". -- 6.5" Lowered height, 17 Sec travel speed to a raised height of 42.5"; Internally mounted 1.5 HP Super Torque motor, 1-cylinder design. -- Complete with: Optional guarded foot control, velocity fuse on cylinder, and maintenance locks on base frame.

AUTOQUIP 48S40 Scissor Lift.4,000 Lbs Cap., Electro-hydraulic operation. -- 48" x 96" Smooth steel platform. Base frame 24" x 64". -- 7" Lowered height, 48" travel to raised height of 55"; internally mounted 1.5 HP Super Torque TENV motor, 1-cylinder design. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on base frame. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- AUTOQUIP Series 35, Surface mounted lift. Unit is painted AQ Black;

AUTOQUIP 60S60 Scissor Lift.6,000 Lbs. Cap., electro-hydraulic operation. -- Large 48" x 120" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;