Sawmill Equipment For Sale
.gif)
3839 Results Found
$ 850
diverter for chip loading system, good condition, 1 available
$ 170
$ 5,000
30 HP electric motor w/double pump direct mounter, approx. 100 gal tank, lots of electric control valves, oil cooler, electric control box
$ 5,000
36" wide x 28' long, steel slat conveyor for slabs etc., very good condition
$ 5,500
.jpg?width=300&height=200&mode=pad)
Call for Price
Complete chip mill operation. All machinery will need to be moved from the current facility. System includes: - 29'x11' Log Deck - Emergency log Deck - 50' Log Infeed Conveyor - 57' Incline Bark Conveyor - 60' Deal Processor w/ Recycle Return Conveyor - Log Outfeed - 112' Log Recycle Conveyor - Log Outfeed - Metal Detector - Control Room - Chipper infeed - Carthage 104" 15 Pocket Chipper with 1250 HP Motor (CEM Lite Knife Hardware) - Refurbished Chipper Disc and 1250 HP Motor - Log Peel Bin - (1) 8'x16' Progress Chip Screens with 80' Chip Stacker - #1 Chip Conveyor: 500' - #2 Chip Conveyor: 1000'
Call for Price
Double End Trim Saw with Material Belt
Call for Price
4 Strand 21' Log in feed deck with Stop and Load. Hydraulic drive, 10' wide.
Call for Price
3 Strand log in feed deck w/ stop and load. 10'W x 23'L. Hydraulic Drive
Call for Price
3 strand log in feed deck with stop and load and w/Hydraulic power. 9'W x 17'L
Call for Price
19' 3 Strand Transfer Deck. 9'8"W
Call for Price
5'x 20' 2 Strand Log Deck w/Hydraulic Drive
$ 195,000
MLS Number 12123201 Small Stud Mill Log deck to feed the Debarker. Max log length 10 ft Max log diameter 18 inch Mainly cut 8 and 9 ft lumber Debarker 18” 6” board edger ( 9 saws moveable hydraulic variable speed) Cut 6” can’t mfg. in 2” material. Can saw 7 x8 cant Max production 25,000 per shift Chip screen 6 x 6 Nicholson Chipper 62” 4 knife horizontal feed Bottom discharge. Twin Scragg 44” diameter saws both moveable Mill is 575-volt 3 phase.
$ 2,800
140' of used, heavy duty, #480 drag chain with wings. Rusty, but in real good condition--has been stored outside. 8" Pitch, ultimate strength 102,000 lbs., side bar height 2", overall width 14.5". Chain is in baskets. To be picked up in Biscoe, NC. Chain sold as is /where is. Price $20.00 per foot or $2,800.00 for all the chain.
Call for Price
Complete shaving mill operation for sale. Machinery can be removed or the new owner can lease the current land. - Morbark Peeler/Debarker - Shaving Mill 1: 40"x12.5', 5-Head, Douglas heads, 50 HP per head, extra plate to run 8' logs instead of 12' - Shaving Mill 2: Jackson 8', 2-Head - 20 MM BTU Dust Burner - 12x50 Triple Pass Drum Dryer - 5x10 Rotex Screen - 37 BTU Dust Burner (Came with system, never used) - Piper Knife Sharpener - All controls and electrical - Approx 10 acres of land (under lease) - All material handling and conveyors - Truck scale - Knuckle Boom: John Deere with CTI Buck Saw
$ 7,500
15" ladder back chain, 24" pan, 16" sides, 32" x 53' electric drive, good condition
$ 9,750
3" x 13" paddles, 16" pan, 15" sides, electric drive, 20" x 68' long, good condition
$ 4,300
40 hp electric, approx 150 gal capacity tank, PVR50 hyd pump, includes all valves attached, very good condition
5 strand, 13' wide x 18' 6" long, H78 chain, electric drive, air cylinders on pop up board stop, good condition
$ 10,750
Model:36EZTD, SN: 42, 5" x 21' tailing belt outfeed, 38" x 9' infeed rolls, 6" x 36" infeed cap, control panel, manual blade set, (2) 20" blades both are adjustable, electric drive, good heavy duty older unit