Sawmill Equipment For Sale
3837 Results Found
Call for Price
BELFAB NBM6-30 TILT-TRUCK DUST COLLECTOR with Patented Modular Technology: Patented Modular Technology allows it to be purchased for current needs and easily upgraded as required; designed exterior use. Specification: -- Each "NBM" filter module is fitted with: (1) Service door & (2) explosion doors per NFPA safety regulations -- Rated Capacity: Rated @ 9,000 CFM with 9.5" static pressure, 7,600 CFM @ 10.4 static pressure. -- Equipped with: Direct drive centrifugal fan assembly with 30 HP Hummer blower motor, anti-spark cast aluminum impeller, 20" inlet diameter.Unit includes: -- (1) Electrical Control Panel w/Shaker Mechanism with:(1) Soft Start starter for the main blower. -- (6) NBM filter modules, each with (18) 7" x 60" poly-twill cloth filter tubes, 990 sq/ft total cloth area. w/ manual shakers. -- (54) Cu/ft waste storage cap. via (6) Heavy Duty plastic Tilt-Trucks w/rollers; each with air-tight quick coupling plate.Options:Security System for Air Return (not included); -- (1) 20" Explosion Back Draft Damper, (1) 24" Fire Damper with status signal, (1) 24" Derivation Tee, (1) 24" Abort Damper and (1) Single Zone Spark Detector.CALL FOR PRICING
BELFAB LW3-7.5 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use with 7.5 HP, 3,600 RPM and 3,500 CFM @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down, 126 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V -- Additional options available.
BELFAB NBM-OP3 15 Tilt Truck Modular Dust Collection SystemPatented Modular Technology, can be designed for current needs and easily upgraded as required; designed for interior use. -- Rated @ 5,000 CFM with 10" static pressure W.G.; with Hummer 15 HP blower at 1,800 RPM, 14" inlet, anti-spark steel impeller. -- (3) "NBM-OP" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes, 495 sq. ft. total cloth area. -- Includes: (300) Gal. waste storage cap. via (3) Heavy Duty plastic Tilt-Trucks w/rollers, each with air-tight quick coupling plate and view portPrice includes pre-wired magnetic starter with 5' of cable
BELFAB NBM-OP4 15 Tilt Truck Modular Dust Collection SystemPatented Modular Technology, can be designed for current needs and easily upgraded as required; designed for interior use. -- Rated @ 5,000 CFM with 10" static pressure W.G.; with Hummer 15 HP blower at 1,800 RPM, 14" inlet, anti-spark steel impeller. -- (4) "NBM-OP" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes, 495 sq. ft. total cloth area. -- Includes: (300) Gal. waste storage cap. via (4) Heavy Duty plastic Tilt-Trucks w/rollers, each with air-tight quick coupling plate and view portPrice includes pre-wired magnetic starter with 5' of cable, PLEASE SPECIFY VOLTAGE
BELFAB NBM-2-10 OP Modular Dust Collection SystemPatented Modular Technology, can be designed for current needs and easily upgraded as required. -- Designed for interior use. -- Rated @ 4,600 CFM with 8.5" static pressure W.G.; (2) "NBM-OP" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes, 330 sq. ft. total cloth area -- Equipped with: 10HP - 1,800 RPM Hummer Blower drive centrifugal fan assembly, anti-spark cast impeller; 12" inlet dia. Wired Magnetic starter for 208/230/460/600 V. -- (2) Heavy Duty plastic tilt trucks, rollers for disposal of waste & adaptors. -- Additional options available.
BELFAB JNBM-OP Dust Collector Patented Modular Technology. Designed to collect dust particles ranging from coarse to fine. -- Self-contained patented modular designed unit for interior use with 7.5 HP, 3,600 RPM and 3,500 CFM @ 7" static pressure, standard blower with 10" in-let. -- Includes: 7.5 HP blower, Direct drive centrifugal fan assembly and anti-spark cast aluminum impeller. -- (1) filter module with (18) twill cloth filter tubes. Filtration surface area 165 sq. ft. -- (1) 300 Gal. Cap. plastic tilt truck. -- Magnetic starter with 5' of cable.
BELFAB BA-1800C Industrial Air Cleaner (Ceiling Configuration)The BA-1800 industrial air cleaner from BELFAB is a multi-purpose air filtration unit for ambient air filtering. The BA-1800 can be used on a wide range of industrial applications capturing fine dust released into the air therefore improving the air quality in a manufacturing environment. Whether you require a medium or high efficiency system, the BELFAB BA-1800 can be configured to your operating needs for optimal dust control. Suitable for ceiling or ground installation the BA-1800 allows you to specify the best filter arrangement for your application. Features: -- Low installation and operation costs -- Flexible design to accommodate most applications -- Low maintenance and quiet operation -- Multiple mounting options and can be a ceiling or ground configurationIncludes: -- Adjustable louver to adjust the air pattern for better air circulation and comfort. -- Dual inlet 3/4 HP Blower motor with 1,800 CFM capacity -- MERV 8 Pleated filter with MERV 13 Pocket filter -- Sound level 76 dB. -- (2) Modules for high efficiencyApplications: -- Welding and smoke fumes -- Grinding dust -- Wood dust -- Composite dust and other industrial dustAvailable Options: HEPA Filter to allow for the highest standard of air filtration -- Magnehelic guage to clearly indicate the service interval for optimal efficiency
BELFAB LW3-10 Modular Dust Collection System w/ HUMMER BlowerSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 1,800 RPM and 4,600 CFM, HUMMER Blower, 12" inlet -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter 460V or 230V, 3-Phase.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.
Call for Price
BELFAB NBM5-25 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 7,500 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (5) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 25 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 18" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (5) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.CALL FOR PRICING
BELFAB BEL150XL Dust CollectorThe BEL Series enclosureless dust collector is an industrial small capacity system generating up to 5000CFM. This dust collector is designed to collect dust particles ranging from coarse to mixed sizes, generated by wood machines operating in intermittent or continuous fashions and producing moderate to heavy dust loads. The BEL Series is generally recommended for applications involving one or two machines in a small shop environment or in larger facilities where there is a need for an industrial “stand alone solution";.Features: -- Low maintenance direct drive centrifugal fan. -- Premium TEFC motor. -- High efficiency beane bag filter bags with efficiency level of 99.99% between 3.8 and 4.6 microns.Includes: -- 15 HP (1,800 RPM) Hummer blower w/ 81dB. -- 479 Sq. Ft. of filtration surface. -- 14" Inlet diameter. -- (3) Plastic tilt truck waste collectors -- Magnetic starter.
Call for Price
BELFAB NBM6-30 CHIP & DUST TRANSFER DUST COLLECTOR Patented Modular Technology and heavy-duty construction for exterior use. Heavy Duty construction designed for interior or exterior use.Specifications: -- Each "NBM" filter module is fitted with; (1) service door & (1) explosion door per NFPA safety regulations, and integrated compact hopper. -- Rated Capacity: Rated @ 9,000 CFM @ 9.5" static pressure, 7,600 CFM @ 10.4 static pressure. -- Equipped with: Direct drive centrifugal fan assembly with 30 HP "Hummer" blower motor, anti-spark cast aluminum impeller, 20" inlet diameter. Unit Includes: -- (6) "NBM" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes; 990 sq. ft. total cloth area (165 sq. ft. per module) w/Continuous Dust Disposal Capacity. -- Pneumatic Chip / Dust Transfer System with (1) 7.5 HP and (1) 5 HP material handling blowers, continuously discharges chips and dust for re-cycling or disposal. -- (1) Electrical Control Panel w/ Shaker Mechanism to include; (4) Interlock Starters; (1) Soft start for the main blower, (2) for the Pneumatic Dust Transfer System and (1) for the shaker mechanism.Security System for Air Return: -- (1) 20" Explosion Back Draft Damper, (1) 24" Fire Damper with status signal, (1) 24" Derivation Tee, (1) 24" Abort Damper and (1) Single Zone Spark Detector. (Optional; pricing upon request)CALL FOR PRICING
Call for Price
BELFAB NBM5-20 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 6,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (5) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 20 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 16" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (5) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.CALL FOR PRICING
Bell (2pc) Round Saw Grinder #20373 - Selling as a pair - 120V - Good condition. Call 800-459-2148 for more info.
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
The listing is for all equipment at a closed sawmill. Everything is ready to be moved ASAP. - Timberline big Jake scragg - 48” front saws - 36” back saws all inserted tooth blades. - 10’ capacity - 60ft infeed with step loader for mill - Crosby edger 6x36 - Dead indeed live outfeed - Numerous belts conveyors. - Home made 3 blade flat edger power infeed and outfeed. - 50 ft barn sweep. - The different log decks one with stop and load. - Several descramblers. - Bandit whole tree chipper needs motor. Has 800 hours on it was wrecked and only damaged motor and cab a little. - 410 printice loader with self propelled carrier. New motor. A lot of misc electric motors, belts and other parts.