Sawmill Equipment For Sale
3834 Results Found
NORDFAB CLEAN-SWEEP NFP 2A OPEN 5,000 CFM 15 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 460 sq. ft.Equipped with: -- NORDFAB "S040-315-CW" 15 HP - 1,765 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 315 mm (12.40") & Outlet size 9" x 16". -- (32) Approx. 8" Dia. x 6' L "BEANE" media filter bags. -- Trough-style hopper base, with (4) 20" Dia. Discharge openings & Distance from opening to floor 40". -- Galvanized sheet steel frame. -- ABB Control, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.
NORDFAB CLEAN-SWEEP NFP 2H OPEN APPROX. 3,600 CFM 10 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 576 sq. ft.Equipped with: -- NORDFAB "S056-250-CW" 10 HP - 3,520 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 315 mm (12.40") & Outlet size 9" x 16". -- (32) Approx. 8" Dia. x 6' L "BEANE" media filter bags. -- Trough-style hopper base, with (4) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ABB Control.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.
Call for Price
$ 55,000
Call for Price
Northtech horizontal band resaw, (2) blades, will cut up to a 12 x 12" cant, powered by (2) 20 HP 460 Volt 3 Phase motors, runs (2) 1 1/4" band blades, Excellent Condition, (new condition with less than 4 hours use). Owner is retiring. Contact Amy (928) 723-9449
$ 7,250
Northtech up-cut chop saw, 15 hp electric motor, 24" dia blade, air operated controls, excellent condition
Call for Price
Has (2) Blades Will cut up to a 12 x 12" Powered by (2) 20 HP 460 Volt 3 Phase motors Runs (2) 1 1/4" band blades Excellent Condition, (new condition with less than 4 hours use).
Call for Price
Call for Price
Call for Price
- Close link chain vs. open (no dust or pinch point) - Oiler has twice the number of lube points (critical) - The VS adjustment location on the 14N. - Can cut up to 4 15/16? with 14? blade vs. the MRS-12 12? blade 3-15/16”. - Can run 12? as well on the MRS-14N - Bottom kickback fingers for added safety - Saws, with proper tooling and material, can glue line Specifications: - Main Motor Hp. = 50 Hp. - Voltage/ Freq. = 460 Volt 60Hz - Phase = 3 Phase - Amp Requirement = 35 Amps - Feed Hp. = 2 Speed 1.5 / 3 Hp. - Feed System = Feed Chain - Feed Speed = 25 – 120 FPM - Variable Speed = Variable Speed Pulley - Elevation Hp. = 1/4 Hp. - Elevation Style = Manual Wheel Adjustment - Elevation Sys. = Jack Screw / Linear Guides - Total Hp. = 53.25 Hp. - Electronics = CE Approved Components - Dual Voltage = Elevation Arbor Motors - Control Voltage = 110 Volt - Assisted Start = Wye-Delta - Pass-Line = 33-1/2” - Min. Length = 17-3/4” - Min. Width = 1/2” - Max. Width = 27-1/8” - Min. Thickness = 5/16” - Max. Thickness = 4-15/16” - Arbor Rpm = 3570 Rpm - Blade Size = 12” Tungsten Carbide Tipped - No. of Teeth = 36 Tooth - Blade Kerf = 3.5 mm - Cleaning System = Brush on Chain - Vertical Travel = 3/8” – 5” - Dust Collection = (2) 6” @ 1962 CFM - Arbor Diameter = 70 mm - Hold Down Style = Pressure Plate - Kickback Finger = (2) Top (1) Bottom Sets - Emergency Stop = Push Button - Rear E Stop = Push Button - Safety Feature = Safety Interlock Switch - Guarding = Full Cabinet Enclosure - Oiler = Automatic Mechanical Oiler - Low Oil Warning = Low Oil Shut-off - Fence Type = Adjustable - Fence Dims. = 103” Length - Frame Const. = 5/16” Steel Construction - Worktable Dims. = 27-1/8” x 64” - Infeed Table = 13-3/4” x 103” - Decible Rating = 74 dB - Net Weight = 4402 Lbs. - Gross Weight = 4694 Lbs. - Machine Dims. = 67” x 58” x 71” - Packaging Dims = 72” x 65” x 77”
$ 47,500
NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln Designed to hold 5,100 bd. ft 4/4 Lumber, or 6,120 bd. ft 8/4 Lumber, Using 3/8" (9 mm) stickers. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max.
(2) Unassembled front load Kilns only System with high HP heat and exhaust designed to hold 8,461 bd/ft (20 cub.m) of 3/4" (25 mm) lumber and 10,475 bd/ft (25 cub.m) of 8/4" (50 mm) lumber (35 cbm). -- Kilns internal dimension: Height 12'3-1/2" (3.75 m), Depth 16' (4.88 m), Width 21' (6.4 m). -- Loading door opening of 10' (3.05 m) x 21' (6.4 m); 1/8" aluminum side wall bumpers, side hinged doors, exterior installation. -- High HP will service the heat requirements up to 245k BTU/Hr. -- Electrical requirement of 230 VAC, 3-Phase, 60 Cy; 7.21 kW/Hr. -- System includes: Timber Dry management automated Dry Kiln Controls for each kiln, touch-screen operator interface, data recording, optional remote access, and networking capability, Replacement part kit for a kiln. Manuals & Blueprints
$ 197,600
Unassembled Front Load Kiln with Standard Heat and Exhaust -- Interior dimensions: H 17' 6" (5.33 m), D 25' 8" (7.8 m), W 26' (7.9 m). -- Loading Door Opening: height 14'6" (4.4 m), width 25'3" (7.7 m). 1/8" Aluminum Bumper Walls, Top Hinge Door, Exterior Installation. -- Average 4/4 capacity: 25,459 Bd Ft. with 3/4" stickers. Average 8/4 capacity: 33,293 Bd Ft with 3/4" stickers. -- Price shown is for kiln only. -- Standard HP Heat requirement: 382k BTU suitable for drying dark hard woods; Optional high HP Heat requirement: 674k BTU suitable for drying softwood and white hardwoods. -- Electrical requirements: 480 VAC, 3 Ph., 60 Cy; 16.5 kW/Hr. Timber Management Control System with touch screen operator interface, data recording, remote access & networking capability. -- Features: Control room with heated air intake; 12'H x 4'D x 26'W. Top Hinge door opening System includes "230" electric chain hoist. Boiler Room: 12' W x 25' D x 17'6" H. 10' roll up & (1) access door. - Timber Dry Management Network Capability.
$ 7,000
Nyle Kiln L300 - L300 Nyle high temperature Lumber drying Kiln - 240v single phase. Capable of temps up to 160 degrees. - Bought new in 1999 Call 800-459-2148 for more info.
$ 2,500
2014 Nyle L200M with 3500 bf hardwood capacity. 220 Single phase. Does not include fans. Includes controls, switches and wires. Power vents. Last used about 6 months ago. Photo is not actual kiln. Call 800-459-2148 for more info.
Call for Price
Call for Price
Call for Price
30 brand new Oleson 10" double cut band blades. Entire lot for $20,000.00. Individual blade $1,175.00. Buyer pays for shipping. Call 800-459-2148 for more info.