Sawmill Equipment For Sale

HewSaw SL250 Trio sawing line from 2005 This line has already been dismantled and loaded into containers. It is ready to ship! - Consists of log positioning devices, conveyors and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 6.2 m - Feeding speed of the sawing line can be adjusted from 50 m/min to 150 m/min. Top diameter: 100–420 mm Maximum log diameter: 550 mm Cant height in Chipper Canter: 75–410 mm Cant width in Chipper Canter: 75–410 mm Cant height in Rip Saw: 63–310 mm Cant width in Rip Saw: 75–410 mm Saw kerf: 4.2–5.0 mm Chip length: 20–30 mm Sawline 1. Measuring conveyor 2. Log scanner 3. Log positioner 4. Chipper canter 5. Cant scanning conveyor 6. Cant scanner 7. Cant saw 8. Seperating conveyor EK2 9. Cross conveyor 10. Belt conveyor 11. Cant turner 12. Infeed conveyor 13. Rip saw 14. Belt conveyor 15. Belt conveyors under machines, for waste handling 16. All electric boxes

23' Hi-Tech Scanner with Dyna Vision Lazers & Allen Bradley 1200P Control Console.

Hi-Tech Chipping Edger

Hi-Tech Chipping Edger

High Tech 20' Trim Saw (10) Blades

Working daily High Point band resaw upto 12" wide cut, powered baker hold down added. 575 Volt 20 hp motor with 575 5hp motor on the hydraulics. Transformer to 480 volt available. Extra blades and parts. asking $6,000USD. Working daily High Point band resaw upto 12" wide cut, powered baker hold down added. 575 Volt 20 hp motor with 575 5hp motor on the hydraulics. Transformer to 480 volt available. Extra blades and parts. asking $6,000USD Call 800-459-2148 for more info.

Hildebrand

HMC AC-40 4 head-block carriage, Silva-Tech set-works with spare parts, air dogs, husk has 48" dia bottom blade and 36" dia top saw, includes complete mill package including 42" chain Log Turner (Sawmill) and nose skids, working condition

HMC 4 head-block circle mill, complete mill package, includes husk w/ top saw, carriage drive, operator cab, and all controls, price includes BRAND NEW set-works and mill gone through shop and ready for production

HMC drop belt, 24" wide belt x 13' long, air lift cylinder, good working condition

chain type log turner, sized for 40" carriage, hyd drive, good working condition

HMC V-2110 Slant Track Debarker w/60Hp Motor on Head, Onboard Hyds, Controls & Wood Constructed Cab S/N 1827-05 w/Patz 50' Barnsweep, Electric Drive, Counter Clockwise Rotation (20' Section Has A Cover), 10' 8" x 30' 4 Strand Log Deck w/Stop N Load, Hyd Drive, Attached Catwalks, 11" x 27' Ladderback Chain Conveyor w/Hyd Driven Gear Drive & 25Hp Hyd Power Pack

HMC V206H Rosserhead Debarker S/N 1147-79

2002 HMC ET-10 Double End Trim Saw.

HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp carriage drive, air powered dogs, 40' long track, was used with band head, includes cab, controls and log turner, complete unit ready to operate and in good condition

HMC Two saw trimmer, Model ET10: Operator on left; NO electric setworks--manually operated hydraulic valve type; standard 10HP electric motors on saw blade; standard hydraulic system; NO belt conveyor. Offered as-is/where-is with no warranty or guaranty, as removed from service.

HMC 75HP DC Carriage Drive S/N 137-98

HMC Carriage 5x10 Cab with controls System is already removed from service and ready to load. Notes from seller: Carriage is 17'1" longKnee spacing is 63" from 1 to 2 78" from 2 to 3 1 to 3 is 141 1/4" Carriage frame is 76 1/2 " wide Track centers are 62" Track rails are worn out. We used the old track frame for our new carriage

HMC Debarker Cab Controls 20"x20' Belt Waste Conveyor Model: V206HST S/N: 1518-93

This mill is ready to be removed from the current location. - 4 Roll Cases 24’’ 2 center 6.5 Diameter 45’ 56’ 62’ 70’HMC All motor controls included - 7 Lumber Decks Flat Chains 10’ 12’ 16’ 20’ 24’ 40’ 82’ 5 Chains WIDC All motor controls included - 2 Log Decks - 28’ Long 12’wide 3 chains stop loader - 14’ long 12’ wide 4 chains stop loader - All motor controls included - Newman Trimmer, drop saws, scrap belt chain 100’x 24’ - Unscrambler 16’wide x 5’high 8 chains - Air Compressor Model SSREP100 HP - Air Dryer storage tank - HMC Model mm10 4 heah block carriage 49’ - HMC Saw Booth - HMC Feed Works - HMC Husk 54’ bottom saw 36’ top saw - 200 HP motor - HMC Log Turner - HMC Drop Belt Live Off Barrer - 10 Headrig saws inserted tooth 54” - Roof Top Chain 10ft 5 Chain - Blower system - Tie-Cant Deck 62’Lx13’ W 4 chain all motors & Controls - Roof Top Lumber Deck 30’L x 13’W 5 chains all motors & Controls