Sawmill Equipment For Sale

MLS Number 11413038 Cooper Overhead End Dogging Scragg With Debarker And Gang Edger Transfer Chain Conveyor x 60’, H82,1-7.5 HP 480V gear drive 54" Cut Off Saw, 20 HP 480V motor, hyd stop gates, 20 HP hyd pack 4 strand x 12' long Debarker In Feed Deck, 5 HP 480V gear drive, H78 16” wide x 19’ long log haul belt conveyor (driven from debarker in feed tire drive) Cambio 24" Debarker, 75 HP 480V drive, spiked in/out feed rolls 20 HP 480V drive 3’ wide x 36’ long hour glass rolls transfer, 7.5 HP 480V gear drive 5-strand Scragg in feed deck x 20', H82, hyd log stop loader, 7.5 HP 480V gear drive Cooper Overhead Scragg Mill, 30 HP 480V 150 gal hyd package, variable speed cable drum feed works with pantograph arm Log positioning rolls on infeed w/ double overhead dogging system, 48” dia. saw husk(125 HP 480V each saw), setworks control 2-18” wide 2-position slab and side board belt conveyors, operators control cab w/ controls, camera and monitor for centering log 8-16’ length capacity, maximum log dia. 22”, largest square cant 12” x 12”, smallest square cant 4” x 4” 5-strand lower camel back landing transfer x 9’-6” long, 4-strand hyd lift transfer to gang edger and cant center bypass Center bypass rolls and belt conveyor to edger out feed landing transfer 10” mainland gang edger w/ 200 HP 480V drive,34” inserted tooth saws with 5/16” kerf(24 spare saws with collars), 2-2-2-4 spacing 6” x 50” mainland board edger w/ 150 HP 480V electric drive, 24” inserted tooth saws with 5/16” kerf, 8”-4”-4”-10”-6” pockets, 7-individual actuated self tailing belt conveyor out feed c/w splitters Camel back transfer,4-strand x 27-1/2’ long, H78B, 5 HP 480V gear drive 2-Saw Trimmer, 4-strand x 10’ long, 16’-4” between 20” dia. saws,10HP 480V drive on feed works and saws, 16” wide x 28’ long out feed belt conveyor, 5HP 480V gear drive 4-strand x 26’ long H78 camel back transfer w/ 5HP 480V gear drive

1988 Cooper End Dogging Scragg Mill with 48" Diameter Blades & 125HP Motors S/N CM-6076. Out and ready to go.

2004 Cooper 16ft Enddogging Scragg S/N CM-6181

COOPER Dropsaw Trimmer - 24' left hand trimmer. Cuts up to 8" thick and 24 feet long. 15 hp saw motors. Zero saw adjustable for desired overtrim. Saws every 2 feet from 6 to 24 feet. 11 lugged feed chains with even-ender. Hydraulic variable speed feed. Controls and console remain wired. Over dimensional for transporting 32' long x 11.5' wide x 10'3" tall.

Complete mill that needs to be removed from the current location. Seller will not split up the operation. (2) Infeed Decks: - (2) 3-Strand Infeed Deck 24' Long - H82 Chain - 3-7/16" Shaft - (2) 10 HP Drives - 3-Strand infeed deck 60' Long Cut Off Saw: - 54" Saw - 20 HP Motor - Hourglass rollers - Hydraulic length stops - Diverter gate to debarker Debarker - Infeed Deck - Cambio 24" Debarker - 75 HP Main motor Scragg: - 5-strand Infeed, 20' Long - Copper Scragg: 30 HP Hydraulic package, variable speed cable feed works with pantograph arm, log positioning, 48" saws with 125 HP motors, (2) 18" 2-position slab conveyors, cab, 8'-16' length capacity, max log 22", largest cant 12"x12" - Outfeed sorting system to two edgers: 5-Stand lower deck, 4-strand hydraulic lift to gang edger Gang & Board Edger: - 10" Mainland Gang Edger: 200 HP Motor, 34" inserted tooth saws with 5/16" kerf - 6" x 50" Mainland Board Edger: 150 HP motor, 24" blades, self tailing outfeed conveyor Trim Saw: - 2-Saw Trimmer with outfeed Greenchain: - Camel Back Landing Transfer - 4-Strand x 26' Long - 4-Strand: 8'4" Decline transfer - 4-Strand 66' Greenchain

Cooper Scragg Mill

Cooper Optimizer Gang Rip Saw Cooper Edger Both set up inline and ready to be removed.

16', 2-125 HP electric motors, Optimal outfeed with kicker. Extra motors and blades.

2010 USED Cooper end dogging scragg mill. 6' to 16' length and up to 24" diameter log capacity. Includes: Operator's cab with joystick controls, COOPER scanning, computer controls, 150hp arbors, linear bearings for shifting saw husks, 56" inserted tooth blades, off bearing drop belts, hydraulic system,3-way separator outfeed roll case,  electrical panel WITH starters. Spare parts included.  Still running and can be seen until February 28. 

2010 Cooper End Dogging Scragg Mill. 6' to 16' Length Capacity, Operator's cab with joystick controls, scanning, computer controls, (2) 150hp Arbors, linear bearings for shifting saw husks, 56" inserted tooth blades, off- bearing drop belts, hyd system, electrical panel with starters, 3-way separator outfeed roll case

Cor Dus 12" x 5' Belt conveyor

Cor-Dus Custom Belted Live Rolls 12" x 12.5' With Motor and Drive.

New in the crate - Ready to ship! The ICON class dust system from Coral comes in 1-5 bag systems ranging from 1,400-3,800 CFM. - Easy installation! - Plug & Play setup - 3-10 HP Available!

In stock and ready to ship! ICON Pro Series from Coral - Integrated Fan - Easy installation - Plug and play! - 2900-3500 CFM - 5.5-7.5 HP

Brand new System - IN STOCK! Coral FM 10 Ready Dust System 5,000 RPM 10 HP 230 or 480 V

100 HP 3 Phase Motor Helle Log Turner Infeed Table Outfeed Table 25HP Chip Blower

Corinth 36" 3 Head Block Carriage, Track,Cab, Control, T-Berry 214 Drive, Mellott #5 Log Turner & Meadows 2 Saw Vertical Edger.

Corley 44-40 Tong Dog Carriage 4-heads 5 HP motor 18 foot long carrage Set works optional (not functional and Corley does not offer spares needed)

Corley 848 Combo Gang Edger with 250HP Electric Motor With Infeed.

Corley Combo Gang Edger Single Arbor with (2) 75HP electric Motors, Serial# EH-648-023, Very Nice Rollers.