Sawmill Equipment For Sale

Hurst Boiler System 1. 1- Used1995 200HP 150 PSI Hurst Hybrid Vessel 2. 1- Used 1995n refractory lined boiler furnace 3. 1- 8” underfeed stoker system 4. 1- 10” Fuel feed metering conveyor system 5. 1- Overfire air combustion fan with ductwork 6. 1- Underfire air combustion fan with ductwork 7. 1- Multi cyclone flyash collector 8. 1- Induced draft fan with exhaust stack 9. Muti cyclone and ID fan support steel with legs 10. Access platforms to boiler with ladders 11. Hurst open vented feedwater tank with 2 Grundfos feedwater pumps and control panel 12. Blowdown separator 13. Hurst Boiler control panel 14. Boiler piping parts 15. Boiler electrical parts 16.Equipment loaded onto trucks Optional: Fuel handling and storage supply system: Walking floor Vibrating Screen Screw conveyor Controls

600 hp 300 psi Hurst Hybrid boiler system. 1996 year model Equipment Included: 1- 1- Hurst 1996 Hybrid Boiler 2- 1- Hurst woodfire furnace box 3- 1- Hurst 12” metering conveyor system 4- 1- Overfire air combustion fan 5- 1- Underfire air combustion fan 6- 1- Hurst combustion air preheater 7- 2- Hurst multi-cyclone collectors with rotary air lock 8- 1- Flyash Duct 9- 1- Induced draft fan with exhaust stack 10- Access platforms with ladders 11- Boiler and collector system support frame and legs 12- Boiler system control panel (PLC Controller, frequency drives, UDC) 13- Under feed fuel stoker system with cast iron grate system. 14- 20,000 lbs/hr DA Tank with two 15 HP Grunfos Pumps 15- Rear Injection Fan

Spiral roller bed for transferring, even ending, and singulating boards in on process.

Hutto Wood Shavings Machine 36 x 107inch x 38inch Deep Stationary Box With Dual 36inch Cutter Heads with 50hp Motors, Hyd Cylinder Operated Cutting Carriage with 22inch x 25ft Take Away Belt Conveyor And Hyd Drive, Electrical Control Box Included 82inch x 33ft x 110 inch Tall From Top Of Box To Flush Bottom Subframe After (7) 16inch Support Legs are Removed w/40hp Hyd Power Pack

HYSTER FORK LIFT. Model H135XL, 13,500 LB capacity, PERKINS diesel engine, good condition, 4510 HRS, mast at rest approximately 12' tall, 11.5" wide x 47" long forks, with cab--but no doors. $23,000 OBO.

Hyster 12K LB Mdl H120XN S/N K005D03008X Propane Forklift

Hyster Diesel Forklift 3 Stage Mast Side Shift 48" Forks

Hyster 210 HD Diesel S/N F007E019312 8' Forks

Hyster H300DXL Diesel S/N C019D01608L Side Shift 8' Forks

Hyster 210XL S/N D007D02057N Diesel 4'x 12" Forks Side Shift

Hyster 190XL S/N E007002263S Diesel 12" x 48" Forks Side Shift

Hytrol Live Roll Conveyors (2) Good Condition

Hytrol Roller Conveyor with Hydraulic Drive Approx. 70' x 50" Wide

Hytrol 8" x 50' belt conveyor with electric drive

Hytrol 10" x 46' belt conveyor with electric drive

Hydtrol Outfeed Conveyor

HYUNDAI - 25L-7A: Fork Lift 5,000 Lbs cap.; LPG-powered (propane) pneumatic tire forklift designed for versatility in: Indoor/outdoor material handling. Part of the "7A" series produced between: 2012 – 2022. Features: 49.7 HP HYUNDAI "L4KB" engine; high efficiency; operator-focused ergonomics; frequently used in construction & industrial applications.Specifications -- Capacity: 5,000 Lbs (2,500 kG) nominal load. -- Engine: HYUNDAI "L4KB" 2.4 L Engine (EPA/CARB Tier-IV Certified); known for reliability. -- Power source: LPG (propane). -- Tires: Pneumatic (air-filled); for rougher surfaces, though cushion options exist in the series. -- Operating weight: Approx. 8,152 Lbs. -- Max lift height: Typically, approx. 10.83 ft. or higher, depending on mast configuration.Features -- Equipped with: 3-Stage mast; side shifter; power steering.

IMPERIAL CM-006 Cartridge Modular Pulse Jet Dust/Fume Collector. Designed to be the strongest, safest, and most efficient dust and fume collector in the industry. -- Overall Specs: 4,800 CFM with 2,800 sq. ft. of total filtration media operating at 2.0:1 Air-Cloth-Ratio (ACR). Factory-provided compressed air (clean, dried) is supplied to manifold-mounted valves, providing an efficient, continuous pulse-jet Filter Cleaning System. -- Fan/Motor: MS-180-HD-70-20 Fan driven by a 20 HP premium E motor. Efficient backward-inclined fan wheel. Manual slide gate damper on fan discharge. Fan-Silencer at fan outlet. Fan capable of 4,800 CFM at 13" SP. -- Electrical Control Panel: NEMA 12 (indoor) enclosure with a main breaker that houses the fan Start, E/stop, continuous On-Demand selector switch, and Local/Remote selector. Soft Start drive to reduce power peaks on startup. -- Construction/Housing/Features: Heavy 7 - 10 gauge construction with no external bolt holes, guaranteeing no leaks for life. Filter access door with lockable handle, heavy-duty latches for one-handed operation. Tool-free filter change out with 'Even-Lock technology positive stop double sealed ensures cartridges are always installed properly. -- Filters are fully grounded to dust collector housing. OSHA-compliant full-length platform and adder access. Bolted support sstructure with 54" clearance for 55 Gal drum & adapter. Discharge via a 10" Rhino heavy-duty collection drum sealed cover kit requires no airlock with a slide gate closure, a tool-free sliding coupler, and a grounding wire. -- Comes with: High Entry inlet with staggered angle inlet baffle plate provides filter protection and allows material to enter at filter level causing the natural downflow material primary separation effect. Horizontal square to round transition. DWYER DCT1000 control manages the Filter Cleaning System with user-friendly software menu. Solenoid time/on-off/settings and high/low differential pressure control capability Auto/Manual control option. Compressed air pressure regulator and filter. -- Optional: Updated control panel to include a Variable Frequency Drive (VFD) to replace the Soft Start drive and keypad on cabinet door. Upgrade Controls to Include VFD. VFD reduces inrush current at startup saving energy. Also regulates system airflow by maintaining static pressure at the collector inlet. This reduces the load on the motor, saving operating cost, instead of dampening the airflow with an outlet damper that is required on other starter options -- On system shutdown, the VFD slows the fan down to a preset speed of 20 HZ for 5 minutes (the duration of the downtime cleaning cycle). This prevents dust from backflowing out of the collector due to the cleaning system pressurizing the collector, creating a back-flow through the ductwork. Please inquire about the price.

Imperial Industries 12ft Cylindrical Dry Storage Bin

2 Cutter Wheels on One Spindle Fully Enclosed Easy Changeover for Different Saw Guides 120V