Sawmill Equipment For Sale

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler

INTERNATIONAL - MT-4843, ...Manual-Tie Horizontal Baler with Infeed ConveyorSpecifications: -- Cylinder: 8". -- Opening size: 60" x 46". -- Main motor: 40 HP.Equipped with: -- Control panel. -- Oil Cooler – Air-Over-Oil. -- 10' Bale Run-Out Table. -- High-Temp/Low Oil Level Shutdown. -- 48" x 43" x 60" Bale Size.

6 cylinder, 210 hp, 3000 hrs. NPT clutch, murphy switch panel, air filters, muffler, ready to go to work.

IBC - NA-1296A-48: Horizontal Closed-Door Baler Model -- 50 HP Motor. -- Main Cylinder: 10″. -- Bale Size: 30″ x 45″ x 60″. -- Hopper Size: 57″ L x 45″ W. -- Platen Pressure: 134 PSI. -- System Pressure: 3,000 PSI. -- Total Force: 235,620 Lbs. -- New cylinder installed approximately (6) months ago.

IBC - "IBC 4343 X 8 – 50 - 63": Horizontal Auto-Tie Baler -- Model: AT-4343-8-50-63. -- Type: Auto-Tie Baler. -- Motor: 50 HP. -- Cylinder Bore: 8";. -- Bale Size: 43"; x 43"; x Variable. -- Manufacturing Date: 2009.

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls

INTOREX HB-65 Automatic Dowel Milling Machine. For round dowels, table legs, broom handles, agricultural tool handles (concentric), umbrellas, stair rails, etc.Specifications: -- Automatic machine for rounding square stock with a cutter head that has (3) tools and finished diameters between 15 and 65 mm (3/32" to 2-1/2"). Unlimited working length. -- The head drive is 8.5 KW (10 HP). -- Working advance speed adjustable between 8 and 30 meters/Min. (26.25 to 98.5 FPM.) by means of a potentiometer. -- The machine has (4) draw-in rollers and (4) draw-out rollers to guarantee the uniform advance of the bar and good finish quality. -- INTOREX is designed and quality-built in Spain. -- Dimensions: 1500 mm (59.1" long x 1200 (47.3") wide x 1400 ( 55.2") high. Approx weight 850 Kg (1870 Lbs).

IPS MODEL TR-1388-100 TWO RAM HORIZONTAL BALER -- 100 HP Motor -- 13" Main cylinder -- 9" Eject cylinder -- Feed Opening 96" x 72" -- RH Eject -- Oil Heater and Cooler -- Bale release door2021 - Re lined, and rebuilt all 3 hydraulic cylinders2024 - Rebuilt 100HP motor, rebuilt 3 hydraulic pumps

IPS - AT-874-100, ...Auto-Tie Horizontal BalerSpecifications: -- Main Cylinder: 8"; Bore -- Bale size: 43" x 43" x variable -- Main motor: 100 HP -- Production capacity: up to 11 TPH (OCC) -- Bale tension cylinder: 6" -- Bale weight OCC: Up to 1,580 Lbs -- Conditioned news: Up to 1,775 Lbs -- Cycle time: 15 Sec -- Oil Reservoir Capacity: (400) gallons -- System Pressure: 3,000 PSI -- Platen Force: 150,700 lbs. -- Ram Face Pressure: 83 PSIEquipped with: -- Programmable PLC controls -- 0 - 15 Sec adjustable time delay -- Precompression lid

IPS - AT-752-50, ...Horizontal Auto-Tie BalerSpecifications: -- Charge box opening: 41" x 50" -- Main cylinder bore: 7" -- System pressure: 3,000 PSI -- Total force: 115,400 Lbs -- Ram face pressure: 63 PSI -- Tension cylinder bore: 6" -- Main motor: 50 HP -- Bale size: 43 x 43" x Variable length -- Bale weight: Up to 1,525 Lbs -- Bale volume: 66 Cu/Ft -- Cycle time: 20 SecFeatures: -- Hopper access door with safety interlock -- Oil Cooler

IPS - CD-751, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 42" x 42" -- Main cylinder: 7" Bore -- Door cylinder: 4" Bore -- Main motor: 30 HP -- Charge hopper height: 90" -- Hopper opening: 40" x 50" -- Bale weight: Up to 1,700 Lbs -- Total force:115,400 Lbs -- Ram face pressure: 65 PSIFeatures: -- AR400 Alloy steel shear blade -- Steel floor with replaceable bearing strips -- 24 Volt control circuits -- Welded Frame, heavy reinforced channel & plate

Irvington Moore 4' Lumber Stacker

3 arm tilt hoist, arms made for 48" packs, electric drive, includes 3 strand 11'x 27'6" infeed deck w/ 81x chain very good condition

Irvington-Moore 7 strand unscrambler, 75" tall, includes even-end rollers, electric drive, good working condition

Irvington Moore 6' Slide Arm Sticker Stacker w/Electrical

4' 2 ARM BREAKDOWN HOIST

drop trimmer, 9 blades, up to 18' long capacity, air cylinders on heads, electric powered, price does not include going through shop

IVISION VCE 1570 Industrial Vacuum Chip CollectorThe VCE 1570 is ideal for Double Head Saws or Miter Saws with (2) outlets.Features: -- The excellence of design and construction technique creates extremely handling-friendly and virtually maintenance-free units with innovative technical solutions to get the best possible performances. -- The sturdy material used and the simple design are additional characteristics, specially designed for industrial purposes, and is equipped with a powerful motor and a state-of-the-art filtering system. -- ideal for heavy dust or collection of steel, aluminum, and or any metal chips, including plastics, fiberglass, PVC.Specifications: -- Power: 2.7 HP -- Max flow rate: 2,400 CFM -- Inlet size: 4" or 6.2" or a 4" + 6.2", number (2). -- Tank Volume: 42.27 Gallons

Complete operation with land (3) Jackson 8-knife shaving mills Newman 32-knife shaving mill Knife Grinders Shaker Screen Cut Off Saw Briquette System Drum Dryer with Burner and Blower Complete electrical and control (2) Verville VP300 Baggers with bins Shrink wrapper Truck Scales