Sawmill Equipment For Sale

Band Mills (Wide) (44) Band Mills (Thin Kerf) (57) Debarkers (81) Edger-Boards (62) Forklifts (50) Gang Saws (53) Hogs and Wood Grinders (245) Log Loaders (1) Portable Sawmills (36) Resaws-Band (167) Scragg Mills (36) Trim Saws (80) Unscramblers (33) Wheel Loaders (89) Wood Chippers - Stationary (140)
Air Compressors (158) Airlocks (25) Banding-Strapping Machines (147) Blowers and Fans (133) Boilers (25) Bolter Saws (1) Carriages (Sawmill) (31) Carriage Drives (Sawmill) (57) Chip Bins (18) Chip Cyclones (22) Chip Screens (42) Chipping Canters (3) Chop Saws (63) Circular Saw Husks (9) Circular Sawmills (76) Conveyors (79) Conveyors Board Dealing (79) Conveyors Deck (Log Lumber) (204) Conveyors General (28) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (52) Conveyors Belts (209) Conveyors-Barn Sweep (23) Conveyors-Live Roll (119) Dip Tanks (3) Drum Dryers (21) Dry Kilns (48) Dump Hoppers (8) Dust Collection Systems (272) Edger Tailing Devices (6) Edgers-Gang (47) Edgers-Slab (5) Edgers-Vertical (7) Electrical (160) Fuel Tanks (2) Gang Rip Saws (113) GenSets (29) Hammer Mills (8) Hydraulic Power Packs (95) Knife Grinders (39) Laser Lights (7) Log Home Machinery (14) Log Merchandising Systems (13) Log Turners (Sawmill) (33) Lumber Carts (20) Lumber Sorters (8) Lumber Stackers (28) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (37) Misc (86) Operator Cabs (32) Package Saws (1) Parts and Parts Machines (9) Plywood OSB and Panel Boards (3) Post and Pole Peelers (22) Power Units-Engines (15) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (53) Screening Systems (9) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (118) Shavings Mills (24) Slab Saws (12) Stake Pointers (1) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (16) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 9 of 192
3829 Results Found
Sort By 
Recently Added Items
2022 Donaldson Torit DWST6-5
$70,000
2022 Donaldson Torit DWST6-5
2015 Grizzly G0631
$1,270
2015 Grizzly G0631
Brewco
$13,000
Brewco
FastLine FLDB
Call For Price
FastLine FLDB
Call for Price

Armstrong Stretcher Roller

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 1,500

Armstrong band saw sharpener, electric drive

Showcase Equipment
260-250-4645
Call

Call for Price

Armstrong #16 Saw Sharpener

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Armstrong #16 Saw Grinder

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 1,500

Armstrong No 90 Band Saw Sharpener #20378 - Model: No. 90 Equalizer - 3 phase - Good condition. Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

$ 3,000

Armstrong #16 Saw Grinder #20377 - Circular Saw Grinder - SN:3818 - Model: #16 - 3 phase - Good condition. Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

$ 3,000

Armstrong Circle Saw Grinder A11 #20379 - SN: 10789 - 3 phase - Good Condition. Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

Call for Price

ASGCO 48" Chip Conveyor Approx 100' long

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Mellott 12ft Slab Drop Belt

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Duct work as pictured Make a reasonable offer For new applications please call for layout assistance and pricing!!

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Assorted flanges as pictured make a reasonable offer

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Assorted sizes and Features as pictured. heavy duty wielded construction made in USA 60” and 84” filter bag heights please call for pricing upon application

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 6,250

ATLANTIC X-5 MODULAR DUST COLLECTION SYSTEM:Specifications: -- Rated @ 3,500 CFM with 5.5" static pressure W.G.; -- (16) 8" x 60" Poly Twill cloth "Quick Release" filter tubes, approx. 440 sq. ft. total cloth area; Discharge to (3) plastic bags. -- Equipped with: 5 HP - 3,500 RPM Blower drive centrifugal fan assembly, anti-spark cast impeller; 13.3/4" inlet dia. -- System includes 230 Volt (factory installed) magnetic starter. -- X-Series Dust Collectors are compliant with NFPA Regulations 664 and 654 for enclosure-less dust collectors.Very strong draw. Quiet. Includes 60 feet, ($2,000) quick clamp disconnect pipes.

Bernie Straple
800-374-5009 ext:339
Call

$ 8,500

ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 13,975 Run Hrs. & 9,704 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.

Jim Reedy
800-374-5009 ext:455
Call

$ 8,250

ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 15,985 Run Hrs. & 11,072 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.

Jim Reedy
800-374-5009 ext:455
Call

$ 35,000

ATLAS COPCO GA-30 FF Rotary Screw Air Compressor w/DryerSpecifications: -- 40 HP - Approx. 187.4 CFM at 125 PSI, single-stage oil-injected rotary screw air-end & totally self-contained. -- Standard features: -- Inlet air filtration, oil injected lubrication, long-life RDX (Roto Duty Extend) synthetic oil; direct-on-line motor starter, and drain trap. -- Equipped with: -- Elektronikon Operator display panel, PLC controller, with pressure gauges, control mode selection, and hour meter. -- Includes: -- Built-in Refrigerated Air Dryer.

Jim Reedy
800-374-5009 ext:455
Call

$ 22,900

ATLAS COPCO - GA 55, ...Rotary Screw Compressor with Air Dryer 75 HP - 1,755 RPM Motor, totally self-contained, single-stage rotary screw air end; approx. 380.1 CFM at 125 PSI; 132 PSIG max. rated operating pressure, max. modulation pressure 135 PSI.Standard features include: -- Inlet air filtration. -- Oil injected lubrication, -- Motor starting control system. -- Air cooled after-cooler, moisture separator and drain trap.Operator Display Panel with: -- Pressure gauges, control mode selection, remote & automatic start, and hour meter.Includes:INGERSOL RAND "TS 325" Air Dryer wired on 230 Volt single-phase.Total operating hours: 52,774.

Jim Reedy
800-374-5009 ext:455
Call

Call for Price

Atlas Copco GA7 Screw Compressor S/N AII 134402 132PSI

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Atlas Copco GA-18 Screw Compressor S/N AII 260972 125PSI

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Altas Model GX11FF 15 HP Compressor 3,580 Hours

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved