Sawmill Equipment For Sale

Pinheiro 2002 Mdl SFA7-1600 62" Dbl Cut Band Mill S/N 16869, Air Strain, 3HP Hyd Pack

Piper Chain Type Log Turner, hydraulic drive, includes hydraulic drive in cab

PIQUA - PW72-50, Semi-Automatic Wide-Mouth Horizontal Baler with MAX-PAK ConveyorSpecifications: -- Cylinder: 7" -- Main motor: 30 HP -- Bale size: 48″ x 36″ x 72″ -- Feed opening: 46" x 50" -- Cycle time: 20 Seconds -- Platen force: 86,600 Lbs -- Bale weight: 1,500 – 1,800 Lbs -- Door cylinder: 4" -- Door cylinder stoke: 12"; -- Conveyor belt: 60"Equipped with: -- 60" Infeed Conveyor with rubber belt.NOTE: New Conveyor rubber belt, paint, and safety stickers.

Pneumafil MDL 11.6 Dust Collector S/N 13418

PNEUMAFIL 13.5-460-8 Reverse Air Dust Collector System;Reverse Air Dust Collector with 42,600CFM at 9 to 1 air cloth ratio, 4,738 square feet of filter area. -- 13-1/2' Dia. round baghouse contains (460) bags - 96" long by 5" dia. filter bags in galvanized cages w/reverse jet bag cleaning. -- Reverse Air from 15 HP blower motor which cycles once a minute over filter bags (rotating plenum covers each row of bags once a minute, reversing the normal air flow direction. -- Reverse Air action back flushes the bags and dislodges wood dust particles collected on the filter media which then fall to the bottom of the 60° funnel hopper for removal), bags are changed via walk-in door.. -- Material handling fan with approx. 48" inlet dia with 150 HP floor mounted motor (covered in a shed); 0.25 HP explosion proof motor for manifold drive. -- Rotary Air Lock, gearmotor driven at the bottom of the hopper feeding and shared horizontal screw type auger (if you want it) with gearmotor drive. -- Features: MOTOTRONICS Soft Start for main motor. FIRETEK Spark Detection System (subject to prior sale with adjacent unit). -- Includes: Explosion doors, sprinkler pipe, interior electrical control panel, support frame, safety ladder, railings, and exterior ductwork.Professional dismantling, rigging, transport and installation is available.NOTE: Unit being sold under this record is pictured on the left side on the first two photos. For the smaller diameter unit on the right side (DIXIE AIR) see record "DO-011266".

PNEUMAFIL 11.5-312-12 Baghouse with Rotary Air Lock (RAL).36,000 CFM @ approx. 7.5:1 Air-To-Cloth ratio, (312) 144" long bags, total filter area of approx. 4,820 sq. ft. -- Fan/motor package: KOGER 37" Fan with a 200 HP TEFC motor -- Bag Cleaning: Walk-in "clean air-side" plenum with plenty of clearance for ease of maintenance, rotating plenum arm with 0.33 HP drive motor covers each row of bags once per minute, each bag cleaned with a blast of reverse air provided by approx. 5 HP blower. -- Construction: Heavy Gauge steel with particle deflector to drop heavier dust particles before cleaning by the bags; Heavy Duty inlet section with wear plates. -- Complete with: Explosion doors Service platform with caged access ladder. -- Single cone hopper with large Rotary Air Lock (RAL) gearmotor driven. -- Original overall height is 42.6" from ground based on literature. Overall weight of housing with structure is approx. 21,500 Lbs. -- Price FOR dismantling, loading. and/or transportation by flatbed truck(s) can be quoted upon request. -- NOTE 1: TWO Units are for sale. Filters are the same. One has 125 HP motor listed as DO-011647 and this one has 200 HP motor. -- NOTE 2: Cyclone, pictured on the left, is listed separately. See record DO-011649

PNEUMAFIL 11.5-312-12 Baghouse with Rotary Air Lock (RAL). 36,000 CFM @ approx. 7.5:1 Air-To-Cloth ratio, (312) 144" long bags, total filter area of approx. 4,820 sq. ft. -- Fan/motor package: KOGER 37" Fan with a 125 HP TEFC motor -- Bag Cleaning: Walk-in "clean air-side" plenum with plenty of clearance for ease of maintenance, rotating plenum arm with 0.33 HP drive motor covers each row of bags once per minute, each bag cleaned with a blast of reverse air provided by approx. 5 HP blower. -- Construction: Heavy Gauge steel with particle deflector to drop heavier dust particles before cleaning by the bags; Heavy Duty inlet section with wear plates. -- Complete with: Explosion doors Service platform with caged access ladder. -- Single cone hopper with large Rotary Air Lock (RAL) gearmotor driven. -- Original overall height is 42.6" from ground based on literature. Overall weight of housing with structure is approx. 21,500 Lbs. -- Price FOR dismantling, loading. and/or transportation by flatbed truck(s) can be quoted upon request. -- NOTE 1: TWO Units are for sale. Filters are the same. This one has 125 HP motor and 2nd has 200 HP motor. listed as DO-011648. -- NOTE 2: Cyclone, pictured on the left, is listed separately. See record DO-011649

Used but reconditioned Pneumafil Corp. reverse air bag house, sizes range from 12,000 CFM up to approximately 60,000 CFM. Reconditioning includes new paint, new filter bags, rebuilt interior components. Call for pricing.

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

Pneumafil Dust Collector Model 135 (13.5-460-8): 150 hp. The round duct enters the collector at 48" Diameter. Dixie Air Dust Collector: Size: 108-12, Type: SPB, 50 HP, Inlet to the motor, circumference is 90".

The seller of this Pneumafil dust collection system has confirmed that it is in great working/running condition and ready to be loaded! - 150HP - Round duct enters the colletor at 48" diameter

Pneumafil Baghouse Model 115-816, 8'Bags, 125HP on Blower with 34" inlet and 30' x 35" outlet.

Pnuematic Systems Inc Electric Drum & Drive

Porter Cable 5HP Single Phase Compressor.

2000 Polvson Wide Band Sawmill - Cap 36" x 25' - Isuzu 75 HP Diesel Engine with approx 1500 hours - Fully Hydraulic - No Set-works - Built in 3 blade edger on the machine that works but the belts are disconnected. 2 blades are moved hydraulically and one is manually adjusted. - Uses 21’6” long blades, 4-6” wide, 19 gauge, 1-3/4” tooth spacing - Armstrong No.2 bandsaw sharpener included - Includes 9 blades, 4" -6" wide and 7 Wood-Mizer new blades- 3" wide Call 800-459-2148 for more info.

2000 Povlsen Wide-bandsaw mill. In good working condition 75hp Isuzu Diesel engine and has approximately 1500hrs on it. Mill can saw logs approximately 36"D x 25' L Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Powerfist 1HP Dust Collector

POWERMATIC Turbo Cone Dust Collector with Twin Canister Filter Kit;Complete with the following features: -- 3 HP 3 PH Material Fan, -- Generates 1,782 CFM. -- Ships from Oregon Coastal region.

58" Precision T/D 200 HP