Sawmill Equipment For Sale

LHI RFPR 102/10 MULTI-BLADE PANEL SAW: with 102" of usable width cutting capacity. Specifications: -- (1) 40 HP main arbor motor for 1/8" min. - 4-1/4" max. material thickness; min. panel length 30"; 102" of usable width cutting capacity. -- 12" Dia max. blade capacity; 1.25" minimum spacing between the blades; -- 3-15/16" Dia. arbor with 1-15/16" precision arbor bearings; -- Positive powered steel contact feed rollers with (8) Polyurethane drive rollers; fixed feed speed of 80 FPM. -- Includes (6) arbor collars - blades not included. -- Complete with:(2) 4" dia dust collection ports on top and (1) 8" dust collection port on bottom. Total recommended 2,200 CFM.Available Options: -- Blade Box & "Quick Change" Arbor Cart and Trolley $12,590.00 each -- Arbor Carts modifications to accept 12" dia. blades $700.00 each -- Single Point Height Adjustment $ 6,000.00 each -- "Quick Change" set up kit (includes belt guide, belt tensioner, and hydraulic arbor lock) $3,695.00 each -- Tandem 8000# capacity infeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt, 31" x 192" platform and cross bars for fork truck entry $14,495.00 each -- Tandem 8000# capacity outfeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt with 48" x 192" platform and beveled crossbars for fork truck entry and auto down indexing $16,390.00 each -- Drag Chain Feeder Conveyor - Roller conveyor transfers sheets to in-feed of saw and dog chains align and start the sheets into the saw feed rolls. Recommended with 102" wide machines, $18,800 Tooling Cost: -- Carbide Tip Blades 10" dia. x 40-tooth thin kerf blades $125.00 each -- Saw Blade Tooling Collars $125.00 eachOn average this machine will cut a bundle (42 sheets) of 3/4" Plywood. LVL, PB, MDF or OSB into narrow strips in 4 minutes or less.NOTE: PRICING DOES NOT REFLECT FACTORY'S 10% MATERIALS SURCHARGE

Lico 161" x 31'8" 2-stage shaker pan with electric drive.

Ligmatech Return Conveyor

LIGNA 10" x 48" thin kerf guided gang. Complete with (2) 200 HP motors; two speed feed works; chromed and knurled rollers; splined arbor. In very good condition. Rollers and bearings replaced just prior to removal. No infeed or outfeed. Includes guide milling machine; puck mold; guides form 7/8" to 2"; shims; many saw blades in excellent condition. PRICE REDUCED to $105,000.

LIGNA rosserhead debarker, model 848. Complete machine with bull wheels, 50 HP head motor, head with cutter bits, operators controls. Good condition. Offered as-is / where-is but loaded on your truck.

8" x 48" Rosserhead debarker. Used very little, LIGNA Model 848, S/N: F162085. Heavy duty. 6 sets bull wheels mounted on 3 7/16" bearings, 36" on centers - (like new, not re-poured). 50 HP head motor powering 8 section carbide tooth head. Maximum length 20'. Base frame 12" WF beam. (6) x 1 1/2" thick kicker arms., 20 HP Hydraulic system for head traverse and log rotation. Heavy duty pivot system and electric panel included. Size approximately 35' x 9' wide x 7 1/2' tall. Operators controls. Machine in great condition, but has been sitting outside . Offered as-is / where-is and loaded on your truck. Price $36,000.00.

LIGNA ALT Trimmer. OPERATOR ON RIGHT. Set up for "0" saw; from 8'  to 16' on 2' increments. Has 4' and 6' saw areas. 7.5 HP motor and saw blade on ladders. 9 feed chains--hydraulically driven. PLC controlled. Includes: operators controls and hydraulic power unit; 2 air operated gates; 5 strand tipple system with dealer wheels and air operated tipple arms; 9 feed chains--hydraulically driven; 5 strand let down conveyor; 5 infeed side, even-end rolls.  Doors need work but are included.  Offered, as removed from service. $36,000.

Ligna 16' Enddogging Scragg

LIGNA 8X40 Multi-Blade Edger/Gang Saw. 40" Wide by 8" high opening. Specifications: -- Bottom saw edger with (5) blades. Powered by a 125 HP TEFC motor. -- Features stacked air cylinder setworks with independent shifting on (3) blades. -- Infeed table with pop-up chains and fence, outfeed rollcase. -- Includes: Powered infeed and outfeed steel roll conveyors.

Lincoln Motor. 100 HP with electronic soft start. Call 800-459-2148 for more info.

125 HP Lincoln electric motor. Call 800-459-2148 for more info.

used 300HP electric motor, tested ran at independent motor shop, have paper work and video, looks to be rewound from the wire leads

100 HP Lincoln Electric Motor Call 800-459-2148 for more info.

Lindner Micromat 2000 Shredder Approx 1100 hours CP Conveyors

LMC - 460 IR: Dust Collector 20 HP Motor; freestanding & self-contained internal air return system; 16-bag unit rated @ 6,850 CFM. -- Equipped with: (16) Upper cloth filter bags with 144 sq/ft. filter area. -- 17" Inlet dia.; dust baffling system to fill bags evenly. -- Complete with: 7" Dia. x 60" long high flow filter bags; quick clamps for easy replacement of lower bags; Heavy-Duty 14-gauge fabricated steel construction. -- Motor starter included!

2012, 80 Hp. 4 cylinder Perkins diesel, 36"x 24' cutting capacity, all hyd. log lift & the works, hand setworks, a GOOD operating mill. Write: Sammy Smoker 81 Utt Rd. Orangeville, PA. 17859 or Call 908-930-8820

2008 Logmaster LM2 - Custom Built with one owner - 30 HP Kohler Gasoline Engine - Fully Hydraulic - Cap 12' x 28" - 19’1” (229-inch) Band saw Blade –One inch width - Ten gallon fuel tank - Always received regular maintenance Call 800-459-2148 for more info.

Logmaster LM5 Sawmill 2" Blades 36" Max log diameter Hydraulic: Log loader, turner, log tapers 75 HP Electric Motor

Cut up to 36” diameter logs. Around 26’ long. Fully hydraulic. 19’1”x2 blades. Log loader, log roller. 75hp 3phase 480v Could easily made back diesel if need be. Set up stationary for best cutting results. Can easily be portable again, axles and tongue are still attached are in good condition.

Dust Collection Pipe (snap ring type pipe)Quantity Diameter Length Description2 22" - 12" 38" branch1 24" - 12" 38" branchmany loose snap rings in tote1 25" 59" pipe4 22" 59" pipe2 24" 59" pipe1 24" x 22" x 6" 21" reducer with branch1 22" x 20" x 12" 33" reducer with branch1 11" x 10" x 10" 29" reducer with branch1 12" auto gate18 10" 59" pipe2 9" 59" pipe1 11" 59" pipe4 12" 59" pipe1 22" 29" pipe1 20" 50" elbow1 20" x 16" x 12" 33" reducer with branch1 24" x 24" x 10" 29" branch1 24" x 24" x 6" 24" branch1 16" x 12" x 7" x 7" 45" reducer with branch1 22" x 22" x 6" 20" branch7 12" 59" pipe4 14" 59" pipe1 16" 43" pipe adj18 8" 59" pipe68 6" 59" pipe10 3" 59" pipe2 8" 32" pipe32 8", 9" , 10", 11" 59" pipe46 5" 59" pipe8 7" 59" pipe39 4" 59" pipe1 14" x 12" x 6" 21" reducer and branch1 14" x 14" x 6" 21" branch20 3", 4", 5", 6" various pipe1 6" x 6" x 6" 21" branch1 10" x 10" x 4" 17" reducer1 10" x 7" x 7" 23" reducer1 10" x 9" x 4" 17" reducer and branch1 10" x 7" x 7" 23" reducer and branch1 10" x 7" 9" reducer5 10" 18" 90 ° elbows20 5" 8" 90 ° elbows7 7" 8" 90° elbows23 6" 8" 90° elbows20 8" 20" 90° elbows4 5" 6" saddle1 7" x 4" x 4" 19" reducer and branch2 8" x 7" x 6" 21" reducer and banch1 7" x 6" x 4" 17" reducer and branch1 11" x 11" x 9" 31" branch1 12" x 8" x 8" 19" reducer and branch1 7" x 6" x 5" 19" reducer and branch1 11" x 10" x 4" 17" reducer and branch1 14" 39" 90° elbows1 9" 20" 90° elbows 2 10" 16" 90° elbows1 7" 22" pipe1 10" x 10" x 4" 17" branch2 10" x 8" x 6" 21" reducer and branch1 14" 39" 90° elbow1 9" 20" 90° elbow2 10" 16" 90° elbows1 7" 22" pipe1 10" x 10" x 4" 17" branch2 10" x 8" x 6" 21" reducer and branch1 8" x 8" x 6" 23" branch1 12" x 10" x 6' 21" reducer and branch1 8" x 6" x 4" 18" reducer and branch28 4", 5", 6", 7", 8", 9", 10", 14" misc1 14" x 11" x 6", 6" 42" reducer and branches1 8" x 7" x 6" 21" reducer and branch1 12" x 7" x 7" 34" reducer and branch1 12" x 11" x 4" 17" reducer and branch1 5" x 5" x 5" 17" branch1 batch 50' 24" straight pipe1 batch various 24" 90 elbow1 batch various 24" 45 elbow1 batch 150' 12" straight pipe1 batch various 12" various fitting