Sawmill Equipment For Sale
.gif)
3815 Results Found
$ 11,000
.jpg?width=300&height=200&mode=pad)
Baker A Single Head resaw with return. Located in MO. #C942
Call for Price
.jpg?width=300&height=200&mode=pad)
Baker 3hd Bandsaw with return and cross over belt 1995. #C941
Call for Price
Baker 3650E Band Sawmill Computer Setworks Debarker Laser 480V 3 Phase Very Good Condition
Call for Price
Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide
$ 15,000
Baker Band Resaw SN: 93-490 Model: BBR-0 Power: 3 phase/480 volt Excellent Condition Call 800-459-2148 for more info.
2000 Baker PAQ 2. 3 phase, 460. Has complete run around, conveyor, and hydraulic power pack. Last used about 3 years ago. Call 800-459-2148 for more info.
$ 7,250
Baker PAQ-O band resaw, 6" wide capacity, line-shaft ready, good working condition
$ 14,000
Single head, 22 Hp Predator gas engine, 6" wide feed belt, Roller guides, Could be lineshaft, Home built return & conveyor belts, 15 new bands. Write for more info Daniel Byler 9028 St Rt. 753 Hillsboro, OH. 45133
Call for Price
Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.
$ 12,500
Accepts material up to 12" x 12" and uses a 12"-wide conveyor Main Drive Motor: 30 HP TEFC Variable feed speed from 0-95 feet (0-29 m) per minute 28" Dynamically balanced solid metal band wheels 4" diameter dust outlet requires 500 CFM
$ 13,900
Circular Board Edger 20 HP 3 Phase Capacities Maximum Flitch Width: 28" with adjustable rail set at 0 or 18" Edging Cut Width: 2 7/8" to 18" between blades When cutting only one edge, 8" maximum width between fence and blade Board Thickness: 1/2" min. to 2 1/4" max. Board Length: Minimum of 4' long and a maximum of 24' Absolutely Like Brand New SAVE!
$ 2,500
2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition
$ AUCTION ITEM
$ AUCTION ITEM
Baker ABX horizontal band resaw w/40 HP head saw motor, resaw has transfer section to manual infeed transfer return system w/10’ belt conveyor w/1.5 HP VFD w/controls and operator’s panel, includes 20 HP hydraulic power pack, includes outfeed rollcase roller chain transfer and return rollcase behind saw, includes switch gear mounted
.jpg?width=100&mode=pad){kind=logo}
$ 75,000
SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRICE INCLUDES A COMPLETE REBUILD AND A FULL WARRANTY!
$ 7,500
$ 60,000
2016 Baker 3665D Bandsaw Mill Two owner 65HP diesel Loaded 3500 hours New tracks, chains, wheels, sprockets, many hoses and bearings, lots of welding and straightening, new blade guides Spare wheels and parts included
Call for Price
Single head Baker resaw | 3 Phase 480V | 30HP | Capacity is roughly 6" wide x 6" tall
$ 12,500
Baker/Augusta Mills Cant sizer Recent rebuild by Baker 3.5"-5.5" cants New bearings New belts 6" belt Lineshaft setup Speed up wheel Work ready PRICE REDUCED
Call for Price
Brand new...never used...still on the original pallet.
Call for Price
Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.
