Sawmill Equipment For Sale
.gif)
3867 Results Found
Call for Price
Up Cut saw w/ 6'x12" gravity roll case, No motor
Approx. 8000 CFM Cyclone used with a 40" Fan. Good condition.
Call for Price
Lumber Carts (10 Available)
Call for Price
200 gallon Vertical Air Tank, Mounted on Stand
Call for Price
Call for Price
Call for Price
15HP HPU with Oil Cooler
Call for Price
Up-Right XL24 Man Lift Battery Operated over Hydraulics
Call for Price
(20) Units cap. Rapid Discharge Bin, prefabricated for nut & bolt erection, exterior constructed of 12 guage structurally reinforced steel. -- Chips are discharged by (2) hydraulically operated shell clamp type bottom doors for a 78" x 96" free fall opening, opening & closing via (2) 5" dia. double acting cylinders w/stroke of 48", 15 HP hydraulic pump motor with 20-gallon reservoir; braced, wide flange steel beam support structure with 14' truck height clearance. -- Complete with: Weather covers, (1) bin level indicator, embed plates w/detailed foundation plans, operator's platform, upper catwalk w/handrail & (1) caged ladder. - It holds (20) units or the equivalent of 4,000 cu. ft. by volume. - Price includes (1) coat of green primer for exterior & (1) coat of safety yellow for handrailing, ladders & guards. - Price does not include foundation, installation or starters & switches for electric motor. -- This is a representative photo - other sizes are available on application.
$ 500
US gear reducer: variable speed; 5 HP. Price $500.00. As-is/where-is. (Inv. # G-14).
Call for Price
USNR 48" 6K Chipper S/N 57-598L
USNR Canter-Sawing Line consisting of: 60' double length infeed section; 10' log rotation section; (ASM sharp chain--NO longer available); 40' infeed section; 6' chipping canter section with 200 HP motors; 7'60" twin band sections with 150 HP motor; 25' outfeed with board off loading; 20' off-feed belt. Price includes removal cost (ready to load); all hydraulic power systems; all Square D motor control centers; Sub-operator's cab with controls included. 2001 model, only operated until 2007. Loaded onto your trucks $245,000 OBO.
Call for Price
3 Guide Milling Machines Good Working Condition Stands Included
Call for Price
USNR 60,000 Board Foot Kilns (10) Available
$ 157,000
Complete with the following features: --"Model 2TA30" with "Model 600" Maximizer Infeed. --"GEO II" Scanner and "Timbergrafx" Operating System. --Capacity 2″ thickness; 30″ wide maximum unedged; 25″ wide maximum edged; 3″ minimum width edged. --750 FPM feed rate. --Unscrambler. --Transfer Decks. --Scanner. --PLC and Computer Controls. --Onfeed, Saw Box with Twin 75 HP Arbors. --Outfeed. --This is a high speed fully automatic edger which can be seen under power.
V-HOLD - MF-2230, ...Profile Grinder.Technical Specifications MF 2230: -- The max. dia. of the cutterhead is 300 mm. -- Max. profile length: 300 mm. -- Movement of a desktop: 45 mm. -- Sharpening angle: ± 30°. -- Grinding wheel dimensions: 225 x 32 mm. -- Grinding wheel rotation: 2,800 - 4,000 RPM. -- Total power: 1.59 kW. -- Dimensions: 1,260 x 1,250 x 1,830 mm. -- Weight: 560 kG.
Call for Price
iDry/Vacutherm Air Vac 2.5 Vacuum Kiln Brand new Weil McLain Boiler Ready to ship!
$ 28,500
Very Clean Used 1998 model 500 Vacutherm Dry Kiln
Call for Price
9" x 54" wide. Center section ONLY. Clam shell design. 5" diameter spline. Three infeed & five outfeed rolls. Two speed "step" feed rolls. PAC-HOE guide system with 2" guides & THOMPSON guide grinder. (No hydraulic power unit). Two (2) 150 HP motors are included. As-is or can rebuild.
$ 38,000
200 HP Valley edger, 6" cants left, 3"-12" boards right, 7 bottom rollers, chain drive w/split hydraulic driven top rollers, hydraulic setworks, 20' enclosed cant belt to 20' transfer table, hydraulic drive, 18' tailer belt
