Sawmill Equipment For Sale

Baker Single Head Band Resaw With Return

Single head Baker resaw | 3 Phase 480V | 30HP | Capacity is roughly 6" wide x 6" tall

2016 Baker 3665D Bandsaw Mill Two owner 65HP diesel Loaded 3500 hours New tracks, chains, wheels, sprockets, many hoses and bearings, lots of welding and straightening, new blade guides Spare wheels and parts included

Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity

Baker 12" resaw w/ cross over chains and return. Machine has four sets, all manual, line shaft ready. Located in PA. #C916

Baker 16" Blue Streak Grade Resaw w/Cab & Setworks

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

Baker C Resaw with Return. Located in NY. #C929

Baker Mill Like NEW

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive

2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895

Brand new...never used...still on the original pallet.

Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.

BALEMASTER 4550G-10 Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

Bauer Disk Refiner with 2 250 HP Motors. Good Condition Removed from Working Environment. 3 Units Available. More Details Coming Soon.

Bauer Disk Refiner with 2 400 HP Motors. Good Condition Removed from Working Environment. 3 Units Available. More Details Coming Soon.

BELFAB - NBM5-20: Modular Dust CollectorPatented modular technology; 6,000 CFM with: Static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with: (1) Service door & (1) explosion door per NFPA 68 safety regulations; unit has (5) filter modules. -- Each "NBM" filter module with: (18) 7" x 60" Poly twill filter tubes. -- Direct Drive centrifugal Fan Assembly with: HUMMER 20 HP @ 1,800 RPM High-Efficiency TEFC blower Motor; UL & CSA approved; AMCA Class-C anti-spark blower assembly with: Heavy-Duty steel impeller; 16" inlet dia.; 825 sq./ft. filter surface area. -- Control Panel & Shaker Mechanism includes: (2) Interlock magnetic starters; (1) for blower motor & (1) for automatic shaker mechanism; adjustable timer; pilot lights all prewired. -- Includes (10) Plastic drum.

BELFAB RPJ26-121 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 15,285 CFM approx. baghouse dust collector with (121) filter bags at 10-feet long with metal cages. Total of 1,884 sq. ft of cloth area. -- Filter Cleaning: Reverse Pulse Jet (RPJ) via plant compressed air that is sequenced by diaphragm valves/solenoids/manifold thru to a Venturi that injects a burst of air pressure to dislodge the dust build up on the outside of filter bags. This is a continuous process during the operation of the dust collector. (no shut down is needed). -- Main Fan: Capacity of 75 HP (motor not included) side-mounted blower. with approx 26" dia. inlet. Rated at approx 15,000 CFM @ 15" SP. -- Comes with: control panel. -- System includes: Relay/, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, safety railing, and approx. 20" Rotary Air Lock. -- Housing is about 8'-5" square by about 23' high overall. Weight with structure is about 8,600 Lbs. -- Note1: Round cone section with storage capacity of about 246 cu ft may not be included. in above height and weight.

BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP, 3,600 RPM, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection.Equipped with: -- (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) cloth collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Note: No motor starter included.