Sawmill Equipment For Sale
.gif)
3799 Results Found
Call for Price
HMC Model HD-40 Carriage Drive 50 HP Hydraulic Unit
$ 32,500
HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.
$ 45,000
HMC 4 head-block circle mill, complete mill package, includes husk w/ top saw, carriage drive, operator cab, and all controls, price includes BRAND NEW set-works and mill gone through shop and ready for production
$ 6,500
HMC drop belt, 24" wide belt x 13' long, air lift cylinder, good working condition
$ 5,250
chain type log turner, sized for 40" carriage, hyd drive, good working condition
Call for Price
HMC V206H Rosserhead Debarker S/N 1147-79
Call for Price
HMC V-2110 Slant Track Debarker w/60Hp Motor on Head, Onboard Hyds, Controls & Wood Constructed Cab S/N 1827-05 w/Patz 50' Barnsweep, Electric Drive, Counter Clockwise Rotation (20' Section Has A Cover), 10' 8" x 30' 4 Strand Log Deck w/Stop N Load, Hyd Drive, Attached Catwalks, 11" x 27' Ladderback Chain Conveyor w/Hyd Driven Gear Drive & 25Hp Hyd Power Pack
$ 20,000
HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp carriage drive, air powered dogs, 40' long track, was used with band head, includes cab, controls and log turner, complete unit ready to operate and in good condition
Call for Price
.jpg?width=300&height=200&mode=pad)
2002 HMC ET-10 Double End Trim Saw.
$ 14,000
HMC Two saw trimmer, Model ET10: Operator on left; NO electric setworks--manually operated hydraulic valve type; standard 10HP electric motors on saw blade; standard hydraulic system; NO belt conveyor. Offered as-is/where-is with no warranty or guaranty, as removed from service.
Call for Price
HMC 75HP DC Carriage Drive S/N 137-98
Call for Price
HMC Carriage 5x10 Cab with controls System is already removed from service and ready to load. Notes from seller: Carriage is 17'1" longKnee spacing is 63" from 1 to 2 78" from 2 to 3 1 to 3 is 141 1/4" Carriage frame is 76 1/2 " wide Track centers are 62" Track rails are worn out. We used the old track frame for our new carriage
Call for Price
HMC Debarker Cab Controls 20"x20' Belt Waste Conveyor Model: V206HST S/N: 1518-93
Call for Price
This mill is ready to be removed from the current location. - 4 Roll Cases 24’’ 2 center 6.5 Diameter 45’ 56’ 62’ 70’HMC All motor controls included - 7 Lumber Decks Flat Chains 10’ 12’ 16’ 20’ 24’ 40’ 82’ 5 Chains WIDC All motor controls included - 2 Log Decks - 28’ Long 12’wide 3 chains stop loader - 14’ long 12’ wide 4 chains stop loader - All motor controls included - Newman Trimmer, drop saws, scrap belt chain 100’x 24’ - Unscrambler 16’wide x 5’high 8 chains - Air Compressor Model SSREP100 HP - Air Dryer storage tank - HMC Model mm10 4 heah block carriage 49’ - HMC Saw Booth - HMC Feed Works - HMC Husk 54’ bottom saw 36’ top saw - 200 HP motor - HMC Log Turner - HMC Drop Belt Live Off Barrer - 10 Headrig saws inserted tooth 54” - Roof Top Chain 10ft 5 Chain - Blower system - Tie-Cant Deck 62’Lx13’ W 4 chain all motors & Controls - Roof Top Lumber Deck 30’L x 13’W 5 chains all motors & Controls
Call for Price
HMC Log Merchandiser 40HP Motor w/ 24" x 10' Hour glass Rollers Hyd Drv & 3 Stops
Call for Price
HMC 206 Flat Track Debarker with cab, controls & barnsweep
Call for Price
HMC RH 13' Carriage MDL AC40 w/Elect, Air, Tong Dog, 48' Track, Forestall Husk, 24" x 7' Belt w/Top Saw, Includes Cab & Mudata Comp Setworks, Control Box, Transformer & 40HP MTR, Forestall 3 Saw Verticle Edger w/40hp Elect Mtr., 150HP MTR, Forestall Hyd Carriage Drv Feed Works, Chain Type Hyd Log Turner w/Hyd Stop & Load w/Nose Skids, 22" x 18' Power Rollcase, Allen Bradley 150HP Starter, Square D 600 Vac 400 Amp 350HP Disconnect, (2) Square D Size 3 Combo Disconnect/Starters, Allen Bradley Size 2 Combo Disconnect/Starter, Steel Catwalk Around Saw.
Call for Price
HMC 5' x 5' Chip Screen S/N 110
Call for Price
5' x 5' HMC CM48 Chip Screen
Call for Price
HMC Rosserhead DEBARKER W/NO CAB OR CONTROLS