Sawmill Equipment For Sale

Morgan 2 Saw Edger

Morgan Double End Trim Saw

Morgan double end trim saw, 6" thick x 68" long capacity, line-shaft ready, feed is hyd driven, good operating condition

with a 15 Hp. 3 Ph. electric motor. Pull the lever to select another size. In good condition

Morgan 2Saw 16' Trimsaw Line. With in-feed Coveyors. Located in GA. #C959

Morgan double end trim saw, Serial # 062800311, minimum 20", max. 60" wide capacity, electric drive, very good condition

15 HP. Electric motor on the blade. 1.5 hp. On the infeed drive. It has a new infeed belt and painted. In good condition. Call for more info 918-752-8142

Morgan Slab Saw w/30HP Motor

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice. Length: 22' 1"; Width: 11' 3"; Height: 8' 2"

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice.

MOSLEY HARRIS Series AP 16/13 2-Ram Horizontal BalerSpecifications: -- Main cylinder: 16" -- Eject cylinder: 13" -- Main motors: (2) 100 HP -- Feed opening: 86" x 20"Equipped with: -- Liner Plates are roughly appx. 50% and evenly worn floor. -- Strapper is a 330 Model, but still works very well. -- Baler has been used primarily for OCC and ONP.

MSI - AT-643: Horizontal Auto-Tie Baler with Infeed ConveyorSpecifications: -- 60" x 43" Feed opening. -- Bale size: Variable x 43" x 30". -- Bale weight: 900 - 1,700 Pounds; OCC" 5 TPH. -- Cylinder: 7"; repacked. -- Motor: 40 HP. -- New hydraulic pumps; new "T-1" Liners on floor & platen. -- 60" Wide x 25 feet long slider bed; conveyor included.

MTA DE 0175 Refrigerated Air DryerR134A refrigerant offers high overload capacities.Easy to use and maintain.Operation in high ambient of 115°F.Lowest dew point provided by thermal storage acts as a buffer covering sudden load variations.Stainless steel demister removes condensed moisture at all air flows.Environmentally safe – no risk of cross contamination between refrigerant and compressed air

Harp Series machining Center for long and narrow parts! Available in 4 or 5 axis systems. Robotic material handling options! The HARP Series, specifically designed for processing High Aspect Ratio Parts (long & narrow parts), is typically customized with Clamping Fixtures and Spindle Configurations specific to the parts being manufactured. With the ability to operate with up to four (4) independently and simultaneously controlled cutting heads, the HARP machines increase throughput of up to 10 times compared to traditional CNC machines. In the door & window industry HARP machines can be found producing over 1,600 door jambs per 8-hour shift with fully automated load/unload systems.

MULTIQUIP GENERATO MODEL DH-04801 45KW GENERATOR IS ON A 2004 DUOLIFT TRAILER WITH ON BOARD FUEL TANK LOW VERY QUIET GENERATOR

MULTISCORE CD-4-30 CABINET GROOVER: -- Specifications:30" Wide x 50" long max. cap., 1" max. material thickness; 30 HP main motor; 3-15/16" dia. arbor @ 3,500 RPM; aluminum bedplate slotted at 1-1/2" spacing for about (20) tool positions; quick release tensioner on the arbor drive belts. -- Equipped with: Feed System: Reciprocating push fence with wood extension fingers to assure consistently square cuts; push fence carries the part through the entire cutting area completely past the arbor. Extension fingers are laterally adjustable for different cut widths. Pneumatic infeed plastic holdover fence laterally adj. to hold parts up against the fence. (8) Hold-down arms with lateral & vertical adjustment mount to a T-slot rack to press parts against the feed table during machining. -- Feed Drive/Speed: 2 HP - 1,750 RPM AC Inverter; variable feed motor via gear motor, with dynamic brake; 0 - 60 FPM. Features: -- Material is pushed off the exit side while machine operator can load new parts at the infeed table. Cutterhead assembly is end supported, adjustable up & down via handwheel, and jam nut tooling locking system. -- NOTE: This machine is currently setup for wainscoting and kitchen cabinet doors.

Multitek 40KW Generators: 40KW 3-phase 240 volt generators (8 available). All have approximately 27 hours of testing. These are new units available for $16,000 each.

Main fan motor 20 HP RAL opening 14” Electrical panel Auto shaker filter cleaning Inlet pipe size 14” Number of filters 63

MURPHY-RODGERS MRZ 17/16L Interior/Open 6 Bag Dust Collector with Auger and Rotary Air Lock General specs: Approx. 7,600 CFM @ 8" SP. (6) top filter bags @ 24" dia. by 72" long. (6) bottom disposable plastic dust storage bags. -- Fan/Motor: 25 HP BALDOR TEFC motor direct driven fan with electrical starter. 17" diameter inlet, with lifting hooks. The bag collector motor is brand new and has never been powered on or fired up. -- Comes with: Main approx. 17" dia trunk line, shut-off, and Quick clamp removal for filter and plastic bags. -- All steel construction with rugged support legs. Air Deflectors allows operator to adjust the air flow and amount of waste evenly into the 6 waste bags. -- Note: NFPA 664 (Fire Code) states that a max. of 5,000 CFM is limit allowed for indoor enclosure-less dust collectors.

With bag house / LMC Pulse Jet filter model 81FSD12 Low pressure Cyclone model LP-961 Includes rotary airlock and rain cap and stand WT 5,914 Low pressure cyclone model LP-48 Includes rotary air lock and stand wt 1,466 100 horse power fan.