Trim Saws For Sale
Category
Trim Saws
.gif)
84 Results Found
Call for Price
New April 2024 barely used Go Fast MET-20 multi-end trim saw 44 FLA, 10 HP blade motors, 1 1/2 HP feed through motor VFD, includes 12" waste conveyor & 1/2 HP material take away, belt conveyor 12", 20" carbide tip saws - 2060 chain, material spec 12' long x 12" wide x 4 1/2" thick, mounted motor controls, Ref #204, Contact Jackie Kittrell 931-698-3342 Seller will load on your truck
$ 17,500
Go-Fast double end trim saw, electric drive, 4" x 8' capacity, good working condition
Call for Price
Heartland Board End Trimmer
Call for Price
$ 32,500
HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.
Call for Price
.jpg?width=300&height=200&mode=pad)
2002 HMC ET-10 Double End Trim Saw.
Call for Price
HMC MDS50 Drop Saw Trimmer s/n 076-00
Call for Price
HMC double end trim ET-10 12ft
Call for Price
HMC MDS-50 Left Hand Drop Saw Trimmer For trimming Boards, Cants, or Ties up to 8" thick and will pass 10" Material. Feed Chains are 81X chain driven by a 3HP Variable Speed Motor with hold downs, each 24" saw is belt driven by 10 HP motors, starters, and fuses are mounted to the Machine in a Nema 12 Enclosure. 0',2',8',10',12',14', and 16' saw units, set up to pass 20' long material. Automatic length trimming with manual override is controlled by programmable control, powered even-ender rolls with a 2 hp drive, and includes one stationary stop gate. Front, back, and top guards are included, and an Automatic shutdown if a door is open while the machine is running. Includes spacers to raise the machine. 360/440 volt
$ 14,600
HOLTEC Lumber Trimmer. Manually trims bundles of lumber. Trims one end only. Manual setting of lumber bundles required. Bar & guard replaced; hydraulics tested; support frame, including steps, sand blasted and painted; electric motor drive checked; air cylinder and up-down of bar tested; manually operated saw assembly moves about 12". Offered as-is/where is. Price $14,600.00
Call for Price
Trim Saw: 6-Head System includes: Unscrambler, Infeed Deck, Auto Loader, Control Panel with Color HMI
$ 17,500
drop trimmer, 9 blades, up to 18' long capacity, air cylinders on heads, electric powered, price does not include going through shop
Call for Price
$ 36,000
LIGNA ALT Trimmer. OPERATOR ON RIGHT. Set up for "0" saw; from 8' to 16' on 2' increments. Has 4' and 6' saw areas. 7.5 HP motor and saw blade on ladders. 9 feed chains--hydraulically driven. PLC controlled. Includes: operators controls and hydraulic power unit; 2 air operated gates; 5 strand tipple system with dealer wheels and air operated tipple arms; 9 feed chains--hydraulically driven; 5 strand let down conveyor; 5 infeed side, even-end rolls. Doors need work but are included. Offered, as removed from service. $36,000.
Call for Price
LSI Right Hand 20' Drop Saw Trimmer with Even End Rollers
Call for Price
New Never Installed 2007 Mill Tech Precision End Trim Saw; Clam shell Opening P.E.T Trimmer with 2 Banks of Motorized Saws; Right Hand Lumber Line; Each Bank with W/Zero Saw & 3 P.E.T.Saws W/Infeed System; Operates on Skip Lug Basis with Mill Tech; Inches & Centimeters
Call for Price
Morgan Double End Trim Saw
Call for Price
$ 75,000
.jpg?width=300&height=200&mode=pad)
Morgan 2Saw 16' Trimsaw Line. With in-feed Coveyors. Located in GA. #C959
Call for Price
.jpg?width=300&height=200&mode=pad)
Morgan 5hd Trimmer. Can cut up to 23' lumber. 7.5hp #00898