Sawmill Equipment For Sale

12" Baker BBR-O Single Head. 30hp Motor. Located in IA. #C968

BAKER ABX Single-head Horizontal Resaw The Baker "ABX" Band Resaws are designed to save space but give you the same great features of larger band resaws.Specifications: -- 12" x 12" Cut cap.; 28" precision machined wheels and 30 HP TEFC motor for main drive (40 HP optional); 2 HP hydraulic feed system with a 10-gallon reservoir, flow control valve for variable feed speed of 0 - 95 FPM; with filter, & remote feed shut off, and powered infeed. -- Features: -- Powered head rise/fall system with 40:1 ratio; endless flat belt infeed w/floating overhead feed rollers, each is hydraulically powered; spring blade tensioning. -- 3/4" - 12" Cutting width, 1/4" - 12" cutting height, uses 0.035" x 1" x 14'-2" blade length; BAKER flat guides for higher production, accuracy & extended blade life. -- Includes: -- Hydraulically-powered infeed hold-down.

Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity

Baker 3665D Diesel Power Portable Band Mill

Baker 16" Blue Streak Grade Resaw w/Cab & Setworks

Baker Band BBS-O Sawmill Elec 3 Phase Over Hyd, Hyd Driven, Hyd Loading Arms, Hyd Log Table, 10HP Elec Pump, Control Box, 2 Roller Tables, Slash Conveyor Table, Cant Hyd Table S/N 07-564

Baker Mill Like NEW

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive

Baker 3650E Band Sawmill Computer Setworks Debarker Laser 480V 3 Phase Very Good Condition

Baker Model DX two head Resaw complete with 5 strand infeed deck with pop up stops, 20’ infeed, 20’ outfeed/ cross over deck, return conveyors with sweep, and a Baker 3 strand green chain with Baker tie stacker off the end. Saw is capable of receiving 18” wide by 11” tall material. Complete system including computer setworks, hydraulic unit, control cabinet, and blades to get you started. Asking Price $100k

Baker Dominator 3650E Sawmill Edmiston Edger Morbark Chipper with diesel engine All decks and rollers

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.

3650 Baker Super Streak Mills

Baker 12" resaw w/ cross over chains and return. Machine has four sets, all manual, line shaft ready. Located in PA. #C916

Baker/Augusta Mills Cant sizer Recent rebuild by Baker 3.5"-5.5" cants New bearings New belts 6" belt Lineshaft setup Speed up wheel Work ready PRICE REDUCED

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRICE INCLUDES A COMPLETE REBUILD AND A FULL WARRANTY!