Sawmill Equipment For Sale

AER 5,000 CFM Dust System

AGET 20SN5157 Cyclone with FT-40 Baghouse2,300 CFM at 9.3" SP; 5 HP Top-mounted blower motor cyclone, 8" inlet dia.,10" outlet diameter. -- Dust particles are pulled through the cyclone with larger particles dropping through the cyclone to dump into collection bin. Finer particles are forced through the Baghouse to filter the remaining air.. -- Includes; 5 HP LEESON ELECTRIC TEFC top-mounted blower, cyclone, AGET "FT-40" Baghouse after-filter, manual slide gate opening and automatic bag shaker which comes on after shut down of collector. -- Interior bag house with (40) 5" dia. x 8' L cloth tubes, total filter area of 383 sq. ft. The larger dust particles are pulled through cyclone into (2) 55-Gal barrel storage with manual slide gate opening at bottom.

AIR CURE 484RF10 Dust Collection System with Rotary Air Lock and Abort Gate.Specifications: -- Filter area capacity 56,000 CFM @ 9:1 Air to Cloth Ratio (ACR), approx. 13'- 2" dia. round baghouse; -- (484) Cloth filter bags of 10' length (3" x 6") oval bags provide for radial movement of bag during cleaning for longer life), 6,180 sq. ft. of filter area. -- Designed for filtration media cleaning via 7.5 HP approx.on board rotary air pump for compressed air operating at about 7.5 PSI. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Rotating cleaning air manifold driven by 1 HP motor, (1) NEMA IV timer & solenoid/diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. Includes: -- Supplied Fan: ALLIED BLOWER & SHT MTL. SIize: 90 MH fan, 38" inlet dia, with paddle wheel blades powered by 250 HP TEFC motor, ground mounted . Note1: This fan is very versatile as it can operate from 10,000 CFM @ 6" or 7" of water SP all the way up to 40,000 CFM @ approc. 14" of water SP depending on RPM chosen. To be conservative one would keep the upper end to around 1,000 RPM. Motor could be 25 HP or 250 HP at these extremes. Being a radial blade fan it is capable of handling most materials. -- Note 2: Depending on application there is filter area capacity to add another Fan/motor for about 16,000 CFM (as per above). -- Explosion doors; walk-in access door on platform at access door. approx. 18" Rotary Air Lock (RAL) and about 38" Abort Gate with separate support stand and access platform.Features: -- 10-Gauge shell all-welded construction, Tangential scroll inlet and Inlet deflector baffle. -- All cages are unbolted to minimize damage and left in the shell. Bags are removed (to reduce weight on cages) and crated - will likely need to be laundered. -- Actual AIR CURE model is 484AC10. -- Note: Upon installation buyer is responsible for compliance to all applicable NFPA or local, state or Federal codes.Transportation also available at extra cost.

AIR CURE 484RF8 Pulse Jet dust Collector.. -- Overall Specs: 30,00 CFM @ 6.1:1 Air-to-cloth ratio, 158" dia. round baghouse with a capacity of (484) cloth filter bags (Bags not Included) of 8' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 4,900 sq. ft. of filter. -- Designed for filtration media cleaning via 7.5 HP on board rotary air pump for compressed air operating at about 7.5 psi. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Filter cleaning: Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. -- Includes: AEROVENT (TWIN CITY) model 330, type CBA-SW Class 4 Backward Inclined Air Handling Blower, Arrangement 9 with 100 HP TEFC motor; Explosion doors; walk-in access door on platform at top and safety ladder. -- Original cages will be removed and stored separately from the filter. Unique skirt at bottom of cyclone thus no support steel is needed and facilitates anchor bolt installation. -- Depending on application/desired air capacity it can be increased to about 44,000 CFM (@ 9:1 to Air-to-Cloth ration) but to do so will require slightly larger fan/motor. -- Needs new bags as they were discarded.

484RF10 baghouse, two dust collector systems available, 6,180 Sq. Ft. cloth area, bolted down rectangular type bags and gasketed cages(484 10ft filter bags Donaldson-Torit type), rotating type arm inside walk-in top plenum, Two fan options, Video before dismantling: https://youtu.be/PvvZloyKlyI Reverse Pulse filter cleaning system- PD pump 7 1/2hp, Explosion vents – pressure relief doors Airlock, Tangential scroll inlet, inlet deflection baffle & air straightener vains 60 degree conical bottom hopper Hopper access door Top walk-in access compartment for filter bags replacement. Abort gate, Has been removed in one piece for quick and easy reinstallation Stored in our yard- ready to load ( no charge) for prompt shipment, Call for a delivered price to your location, Baghouse Approximate height 46ft, diameter 13ft 6”+-, weight? ( F.05.250.)Allied Blower fan, 250HP motor Reliance Electric Duty Master 841 XL , 1785 rpm, 450 BI, serial# 1743, order# 19925, sys.rto, ( Twin city Fan: size 450, type RTF-SW, ARR 1, class 23, serial # 01-163289-1-1) inlet 38”, outlet 36” x 29”, ( F-01-360) 250HP motor Reliance Electric Duty Master 841 XL, 1785 rpm, size 90, serial#1720, order# 19925?, inlet 38”?, 36” x 30” outlet,

AIREWORKS FX-05-2000 Modular Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, & multiple discharge options.Features: -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing environments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 2,000 CFM / 7-10 IWG with 16.7:1 air to cloth ratio. Equipped with: -- (5) 12" x 6' High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 125 Sq. Ft. of cloth filter area and 16.7:1 air to cloth ratio with 40 Gal. of collection capacity. Complete with: -- Direct drive dynamically balanced centrifugal fan assembly with 5 HP TEFC motor, 1,750 RPM, non-sparking Heavy Duty machined & balanced impeller; 11" inlet dia. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

AIREWORKS FX-10-3500 Modular Dust Collection System. The "FX" Series is a self-contained modular designed unit for interior use that utilizes a dynamically balanced fan.Features: -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options. -- "AIREWORKS" has over 20 years of applied experience in developing & building commercial dust collection systems. -- The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- Heavy Duty metal constructed plenum between the top bags and bottom dust collection; rated at 3,500 CFM / 7-10 IWG with 14:1 air to cloth ratio. Equipped with: -- (10) 12" x 8' High-Efficiency filter bags up and (2) plastic collection bag down. -- The filter bags have 250 Sq. Ft. of cloth filter area and 13:1 air-to-cloth ratio with 80 Gal. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 10 HP TEFC motor, 1.750 RPM -- Non-sparking Heavy Duty machined & balanced impeller; 13" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.PHOTO DOES NOT REPRENSENT ACTUAL MACHINE

AIREWORKS FX-15-5000 Modular Dust Collector. The "MOD-FLEX" technology designs are engineered for compatibility with today's modern work cell manufacturing enviroments & are expandable as your business evolves. -- The "FX" series is a self-contained modular designed unit for interior use; it utilizies a dynamically balanced fan, "TEFC" motors, precision Laser-Cut components, and offers multiple discharge options. -- Rated at 5,000 CFM / 8.38 IWG with 16:1 air to cloth ratio. -- Equipped with: (12) 12" x 8' High Efficiency filter bags up with 301 Sq. Ft. of cloth filter area. -- Complete with: Direct drive, dynamically balanced, centrifugal fan assembly with 15 HP TEFC motor; Heavy Duty machined & balanced, non-sparking impeller; 15" dia. ductwork inlet, starter. -- Sound Level less than 80 db.

AIREWORKS FX15-5000X3 Modular VFD controlled Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan. -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options with standard being plastic bags. -- AIREWORKS own Cruise Control system and how it works... Multiple machines can be connected to a single FX collector. The following example shows several machines connected to FX15-5000.Each machine can be isolated by a slide gate when not in use. If machines 1 & 2 total 4,500 CFM when they are in use, the sensor will request the Cruise Control software in the VFD to run the fan motor at the required speed to exhaust exactly 4,500 CFM. The motor will in this case run at 55.9Hz and consume 11 HP. If machine (4) starts and machine (2) shuts down, then the exhaust requirement drops to 2,200 CFM.The Cruise Control will now request the fan motor to spool down to 55Hz and the power consumption drops to 8.6HP. In this way the fan speed and power consumption will automatically be adjusted at all times to match the actual requirement. The built-in Cruise Control guarantee's that the suction is always constant at a minimum power consumption. -- Heavy Duty metal construction, fully welded plenum built using 11 Ga. steel. -- Rated at maximum 5,000 CFM pressure range from 8 - 12 IWG. Equipped with: -- (15) 8' tall High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 375 Sq. Ft. of cloth filter area and 21:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, 5,000 CFM, 1,750 RPM. -- Non-sparking Heavy Duty machined & balanced impeller; 15" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.

AIREWORKS - FX-15-5000: Modular Dust Collector"MOD-FLEX" Technology designs are engineered for compatibility with today's modern work cell manufacturing environments & are expandable as your business evolves. -- The "FX" series is a self-contained modular designed unit for interior use; it utilizes a dynamically balanced fan, TEFC motors, precision Laser-Cut components, and offers multiple discharge options. -- Rated at 5,000 CFM / 8.38 IWG with: 16:1 Air-to-cloth ratio. -- Equipped with: (12) 12" x 8' High-Efficiency filter bags; up with 301 sq/ft. of cloth filter area. -- Complete with: Direct drive, dynamically balanced, centrifugal fan assembly with: 15 HP TEFC Motor; Heavy-Duty machined & balanced, nonsparking impeller; 15" dia. ductwork inlet. -- Waste collection bin with pneumatic cylinder lift by air switch -- Unit comes with manual motor starter; factory installed wiring from the motor to the starter. -- Sound Level: Less than 80 dB.

AIREWORKS FX15-5000 / 2XTB Modular VFD controlled Dust Collection System. The "FX" series is a self-contained modular designed unit for interior use utilizes a dynamically balanced fan. -- "TEFC" motors, precision Laser-Cut components, & multiple discharge options with standard being plastic bags. -- AIREWORKS own Cruise Control system and how it works... Multiple machines can be connected to a single FX collector. The following example shows several machines connected to FX15-5000.Each machine can be isolated by a slide gate when not in use. If machines 1 & 2 total 4,500CFM when they are in use, the sensor will request the Cruise Control software in the VFD to run the fan motor at the required speed to exhaust exactly 4,500CFM. The motor will in this case run at 55.9Hz and consume 11 HP. If machine (4) starts and machine (2) shuts down, then the exhaust requirement drops to 2,200CFM.The Cruise Control will now request the fan motor to spool down to 55Hz and the power consumption drops to 8.6HP. In this way the fan speed and power consumption will automatically be adjusted at all times to match the actual requirement. The built-in Cruise Control guarantee's that the suction is always constant at a minimum power consumption. -- Heavy Duty metal construction, fully welded plenum built using 11 Ga. steel. -- Rated at maximum 5,000 CFM pressure range from 8 - 12 IWG. Equipped with: -- (15) 8' tall High Efficiency filter bags up and (3) plastic collection bag down. -- The filter bags have 375 Sq. Ft. of cloth filter area and 21:1 air to cloth ratio with 33 Cu. Ft. of collection capacity. -- Direct drive dynamically balanced centrifugal fan assembly with 15 HP TEFC motor, 5,000 CFM, 1,750 RPM. -- Non-sparking Heavy Duty machined & balanced impeller; 15" inlet diameter. -- Manual motor starter for 230 V or 460 V. MUST SPECIFY.Includes: 2XTB Tipping Bin with (2) inlets. -- Forklift truck moveable with Locking wheels and railings instead of plastic collection bagsPHOTO DOES NOT REPRENSENT ACTUAL MACHINE

5 HP Mist Collector 460 volt 3 phase

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

Air-Tek refrigerated air dryer, 400 CFM, 2hp, 460 volts, excellent condition

This 4 saw 16' x 6" multi saw trimmer will easily cut boards and cants in a multi cut product or simply double end trim. Fixed saw precision end cuts the lumber and 3 movable saws are easily adjusted with a slide and lock motion. Independent saw motors with 5.5 KW or about 7.5 hp motors. Quality and Performance in every cut simple handling, operation and maintenance. Call Kittrell 931-797-6284

Akkuslar 8" Double Arbor gang Saw. 125hp bottom, 100hp top. New- Never used. Located in GA. #C972

This bull type gang edger is truly the beast. Arbor runs up to 8 saws with a combination arrangement that fits your needs. 4 3/4 inch X 25.5 inch input with the output of 1/2" to 4-3/4" with 6-1/4 thick capability. Cutting process is provided with diamond circular saws, single saw shaft is fixed. Hydraulic roller with fence. Infeed top press roll is hydraulic. Cut grade, pallet stock or pallet cants with this mighty machine comes with a set of spare parts. Call 931-797-6284

The HCD2M 250 Double Arbor Gang Saw is designed for cutting timbers with a thickness of 9-3/4" and 27-1/2" wide Saw arbors are fixed. Hydraulic feed with knurled rolls top press roll is adjust hydraulically. Cutting rate is 65' per minute. For more information call Jackie Kittrell 931-698-3342 - 931-797-6284

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

HTPM 250 Machine chips small logs with right and left chipping heads and profilers in one pass the HPM 250 goes behind this chipping module to maximize use of the roughest logs to make good lumber See pictures to see one in production.