Sawmill Equipment For Sale
.gif)
3830 Results Found
.jpg?width=220&height=170&mode=crop)
Call for Price
This machine is no longer needed at the current facility. Ready to load. Wadkin NNV-C Profile Grinder 3-phase Specification VISAGE - With bilateral linear action providing profiling and straight knife grinding up to a max of 335 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 335 mm. Max dia of cutting circle 350 mm. Includes arbor, grinding wheel, stylus, etc. Also included Carriage locks; Washdown facility. - per seller: Arbor on the machine itself is 1 1/4" we have a spacer we use on grinding wheels if we need to adapt them to our size arbor. Yes there is a dresser on the machine.
WADKIN "VISAGE PLUS" Profile Grinder Specification -- 12-1/8" Max. arbor capacity; -- Max. cutting circle is 13.8", min. cutting circle is 2-3/4". -- Max. depth of profile is 1.57", --Grinding wheel dia. is 9"; infinitely variable head tilt mechanism 0° - 15° maximum.Equipped with & Features -- 2 HP Grinding motor, -- Spindle speed up to 3,600 RPM; -- Max. coolant tank cap. is (8) gallons; min. is (4) gallons
$ 4,830
WADKIN - NV 300, ...Profile GrinderSpecifications: --Working dimensions: 12-3/8" Max. arbor capacity. --Cutting circle 13-3/4" max. and 2-3/4" min. dia. --Grinding motor: 2 HP Motor, 3,600 RPM grinding wheel speed. -- 1-1/2" Max. profile depth. -- 9" Max. grinding wheel diameter.Equipped with & Features: --: 0.02 HP Coolant system pump motor. -- 8-Gal. removable coolant tank with block magnet. --Top & Bottom coolant flow control. -- Infinitely variable head tilt mechanism 0° - 15° max. -- Linear action carriage. --Clearance angle scale. -- Adjustable arm rest and twin coolant pipes to profile wheel.
$ 10,000
.jpg?width=300&height=200&mode=pad)
Call for Price
(2) Webster 18’ x 30’ Vibration Conveyor
Call for Price
10' Webster Vibrating Conveyor - size 24/33 w/ drive, 2 HP motor
$ 14,300
Webster 34" wide pan x 35' long, 10" sides, electric drive, good condition
$ 15,000
Morbark 17" wide pan x 37' long, 6" tall sides, has fines section, chipper infeed spout, good condition
Call for Price
Webster 30" x 25' Vibrating Conveyor
$ 5,000
Webster vibrating conveyor drive section, 24" wide pan x 10' long, good working condition
Call for Price
Webster Vibrating Conveyor 18” Bottom, 57’ Length
Call for Price
NEW WEG soft starters, open style (for your enclosure), 460 volt. Many options available. Pricing Examples: 200 hp (255 amps) $2,065; 100 hp (130 amps) $ 1,140; 300 hp ( 365 amps) $ 2,380. Call for pricing for options and different HP's than above.
Call for Price
WEG GPH2075QC4000 Soft Start, 75 hp, SSW07 type Soft Start, To be cut 6" above and below.
Call for Price
WEG WWE-361-BP Starter, 250 hp, To be cut 6" of motor (2) Available
Call for Price
WEG GPH2100QC4000 Soft Start, 100 hp , SSW07 type Soft Start, To be Cut 6" Above and Below (3) Available
$ 8,500
250HP, 460VOLT, 1800RPM, EITHER 447T or 445T FRAME, TEFC, INVERTER DUTY, PREMIUM ENERGY EFFICIENT. This motor never ran on the equipment that it was mounded too.
Call for Price
WEG Motor, 100hp, 1790/1490 Rpm, 230/400, 200/400,405T Frame
Call for Price
WEG GPH2030QC4000 Soft Start, 15hp, SSW07 Type
Call for Price
WEG Soft Start, SSW07 type Soft Start, To be cut 6" above and below
$ 8,500
.jpg?width=300&height=200&mode=pad)
WEIL-MCLAIN, MODEL 988, steam or hot water boiler. Used in school system approximately 7 years. Good condition. Price includes: 7 sections of cast-iron plates and enclosure with controls. #2 fuel oil fired burner. Technician who removed system and put in a different system available to discuss. Offered as-is, as removed from service. Price $8,500.00 OBO