Baker For Sale
800-548-6914
800-548-6914
It is the mission of Baker Products to provide quality equipment and the service to support it through qualified employees, advanced manufacturing technology and creative innovations to members of the worldwide wood industry.
45 Results Found
Call for Price
Baker Model A Resaws comes with: Return conveyor, Powered Hold Down, Power Hold Over, Infeed/Outfeed Turnarounds, 240V 3Phase
$ 40,000
$ 65,000
LOWEST HOUR BAKER 3667D ANYWHERE – RUNS AND LOOKS LIKE NEW !!!! Always inside and rarely used by a hobbyist !!! $65,000obo including Setworks, Dinasaw Blade Sharpener and Blade Setter. Baker 3667D Sawmill fully hydraulic, Model No.: BBS-0, Serial No. : 05-430, 67-HP (49.59 kw) John Deere 4-cylinder diesel engine (liquid cooled) with glow plugs, Link to 78 page owner’s manual and complete specs: https://www.baker-online.com//FileStream.aspx?FileID=158, Cutting Capacity:,36 in (91 cm) maximum diameter, 28 in (71 cm) through center, Log Length Capacity: 16 ft Band Blades: 17 ft 4 in x 2 in (5.28 m x 50.8 mm) or 17 ft 4 in x 1 ½ in (5.28 m x 38.1 mm) 17 ft 4 in x 1 ¼ in (5.28 m x 31.75 mm) Blade Thickness: 0.042 in (1 mm) Band Wheels: 28 in (71 cm) diameter; all-steel with crown Sawdust Removal: 6” (152mm) outlet; min. 1,300 CFM suction recomended at dust removal chute Also included: 2/ Dinasaw Blade Sharpener Model No.: RBA Serial No.: RBA 0707181 3/Dinasaw Blade Setter Serial No.: JSD2108, $65,000 obo - Call 828-779-7102
$ 98,000
2019 Baker 3665D, only 30 hours, comes w/log deck, 3 strand 20' off bearing deck, debarker, bed extension to cut up to 30' log. Like NEW condition. Price Reduced! $98,000 OBO 616-302-8516
Call for Price
Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.
Call for Price
Call for Price
Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.
Call for Price
Baker Tailing Belt for Resaw or other type of system. Never installed. 6" belt x 7' long. Hydraulic drive. No motor.
$ 12,500
Baker/Augusta Mills Cant sizer Recent rebuild by Baker 3.5"-5.5" cants New bearings New belts 6" belt Lineshaft setup Speed up wheel Work ready PRICE REDUCED
Call for Price
This shop has been closed about a year due to seller's health. Everything is ready to be removed. - Baker 3-Head Resaw - Baker 2-Head Resaw - (2) Baker Dedusters - Baker Single Notcher - Cornell Chop Saw with infeed deck and powered rollcase - (2) Forklifts - Also available: Misc parts, small saws, air compressors...
Call for Price
Call for Price
Call for Price
Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide
$ 13,900
Circular Board Edger 20 HP 3 Phase Capacities Maximum Flitch Width: 28" with adjustable rail set at 0 or 18" Edging Cut Width: 2 7/8" to 18" between blades When cutting only one edge, 8" maximum width between fence and blade Board Thickness: 1/2" min. to 2 1/4" max. Board Length: Minimum of 4' long and a maximum of 24' Absolutely Like Brand New SAVE!
$ 7,500
$ 75,000
SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRICE INCLUDES A COMPLETE REBUILD AND A FULL WARRANTY!
Call for Price
Single head Baker resaw | 3 Phase 480V | 30HP | Capacity is roughly 6" wide x 6" tall