Sawmill Equipment For Sale

Band Mills (Wide) (41) Band Mills (Thin Kerf) (50) Debarkers (83) Edger-Boards (59) Forklifts (51) Gang Saws (55) Hogs and Wood Grinders (238) Log Loaders (1) Portable Sawmills (27) Resaws-Band (169) Scragg Mills (36) Trim Saws (83) Unscramblers (33) Wheel Loaders (86) Wood Chippers - Stationary (145)
Air Compressors (167) Airlocks (25) Banding-Strapping Machines (127) Blowers and Fans (129) Boilers (24) Bolter Saws (1) Carriages (Sawmill) (29) Carriage Drives (Sawmill) (57) Chip Bins (18) Chip Cyclones (24) Chip Screens (42) Chipping Canters (3) Chop Saws (67) Circular Saw Husks (8) Circular Sawmills (83) Conveyors (81) Conveyors Board Dealing (79) Conveyors Deck (Log Lumber) (212) Conveyors General (30) Conveyors-Auger (4) Conveyors-Live Floor (9) Conveyors-Run-Around (4) Conveyors-Vibrating (53) Conveyors Belts (199) Conveyors-Barn Sweep (26) Conveyors-Live Roll (121) Dip Tanks (4) Drum Dryers (21) Dry Kilns (46) Dump Hoppers (8) Dust Collection Systems (266) Edger Tailing Devices (6) Edgers-Gang (46) Edgers-Slab (6) Edgers-Vertical (6) Electrical (156) Gang Rip Saws (121) GenSets (29) Hammer Mills (7) Hydraulic Power Packs (95) Knife Grinders (36) Laser Lights (8) Log Home Machinery (14) Log Merchandising Systems (15) Log Turners (Sawmill) (35) Lumber Carts (20) Lumber Sorters (8) Lumber Stackers (28) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (37) Misc (92) Operator Cabs (31) Package Saws (4) Parts and Parts Machines (8) Plywood OSB and Panel Boards (4) Post and Pole Peelers (21) Power Units-Engines (12) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (55) Screening Systems (9) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (113) Shavings Mills (19) Slab Saws (14) Stake Pointers (1) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (16) Wrap and Packaging (6)

Filtering

Reset All 

thru
 Used     New
Viewing Page 75 of 191
3801 Results Found
Sort By 
Recently Added Items
Morbark Rosserhead 642/648
$20,000
Morbark Rosserhead 642/648
1993 Wood-Mizer LT40 Super Hydraulic
$15,500
1993 Wood-Mizer LT40 Super Hydraulic
Unknown
Call For Price
Unknown
Unknown
Call For Price
Unknown
Call for Price

Meadows Mills 14' Rollcase

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

Call for Price

Meadows Mills Spartan 6" Edger Gang

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

$ 22,000

Meadows head saw with 4 head block carriage , computerized setworks, Corley cab, hydraulics and electric headsaw motor + 10 HP power pack $22,000 Delivered to your location. Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

$ 6,000

Meadows circular sawmill on wooden husk abour 20' long. 3 headblocks. 56" blade. No power. Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

Call for Price

Meadows Gang Edger

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

$ 5,500

21' MEADOWS, green collecting chain, floored, 78 roof-top chain, 3' centers, 2 HP drive. $5,500.00

 Biscoe, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 5,500

28' Sorting chain conveyor, 4'centers, 81X chain, electric drive. Price  $5,500.00

 Biscoe, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 450

Hyd reservoir with oil cooler, approx 20 gal, good working condition

Showcase Equipment
260-250-4645
Call

Call for Price

Meadows 16' 3 Strand Log Deck w/Drive

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Meadows Mills 6” Spartan Gang/Edger

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

$ 56,000

Meadows Circular Sawmill Model #1 - Refurbished Mill - New Factory Built saw Arbor and Bearings from Meadows - New Factory Built Live Feed Conveyor - Computer Setworks - Capacity of 1,000,000 + BF per year - 225 HP Detroit Diesel - 56" Blade with new bits and shanks - Have Most of the factory built parts - Some Hydraulic Hoses need to be Changed - Primarily made crossties when in operation Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

$ 10,500

Meadows #1 Automatic Circular Sawmill - Automatic Set Works - Hydraulic Log Turner - 4 Head Block Carriage - No Power - Ready to load Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

$ 6,050

MEADOWS MILLS 100H CHAIN LOG TURNER -- Hydraulic Cylinders: One 2" x 12" with 1 1/2" rod -- Turning Chain: #100 chain with 3/4" dog width and 13 bits -- Drive: H60TB13 sprocket with bushing, H60SDS25 sprocket with bushing, #60 drive chain, and chain guard -- Drive Shaft: 1 11/16" diameter 1018 cold roll -- Idler Shaft: 1 11/16" diameter 1018 cold roll -- Frame: Base constructed from 3" x 4" tubing, uprights constructed from 8" channel and 4" channel, head frame constructed from 3" x 4" x 3/8" angle and various flat bar -- Drive Motor: Charlyn 103-1032 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 10 gpm & 950 psi -- Controls: not included in base price

Jim Reedy
800-374-5009 ext:455
Call

$ 45,000

6" X 54" MEADOWS "TITAN" Combination gang-edger with 100HP drive motor, 5 saws on gang side and 18" edger side movement. Door on right. Laser movement. 48" roll width infeed and push button controls. 20 HP hydraulic system. Outfeed belt, 14' long. Very good condition. Price:  $45,000.00

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 190,000

MEADOWS #1 Automatic Sawmill;Complete with the following components and features: -- 15' Long 4 HB Carriage. -- Operator’s Cab, . -- Drive & Turner. -- Computer Setworks. -- YAMANI 4" Band Headrig. -- MEADOWS Titan 4" combo Edger also new in 2001; -- 30' x 24" Live Rolls. -- Electrical Switchgear. -- 33" Dia max. log. -- Capacity: 6,000 to 8,000 BF per day.NOTES: &#9679 Can be seen in operation.

Jim Reedy
800-374-5009 ext:455
Call

$ 34,900

Meadows Circular Sawmill 1 million + board feet per year 56" blade with new bits and shanks New factory built saw arbor and bearings from Meadows New factory built live feed conveyor Computer setworks 225 hp Detroit Some hydraulic hoses and wiring could be replaced Was making crossties

Mitch Stevens
828-773-6986
Call

Call for Price

Meber SR900 Resaw

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 125,000

Used, 2016 MEBOR horizontal band saw. Model 1200 (48" diameter), 6" wide saw blade. 75 HP drive; used to cut lumber 3 years max; cuts 16' long logs, and has rail to extend to 24'. Electronic set works. Includes: MEBOR 16' log deck, 4 strands, with stop/loader, and MEBOR saw sharpener, Model BA. Will require factory trained start-up technician.  Located in warehouse in Biscoe, NC

 Biscoe, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

Call for Price

MUST BE ORDERED. NEW MEBOR horizontal band saw Model HTZ 1200 PLUS to saw up to 48" diameter x 21' long logs x 34' OAL x 26,000 lbs. Includes: 60 HP motor driving 48" cast steel wheels; 2 log turners; 4 hydraulic log clamps; 4 driven hydraulic rollers; 15 HP heavy duty hydraulic system; automatic off-bearing belt; automatic slab/board drag back; double cut; 6" or 7" blade; easy controllable, high end electronic setworks. F.O.B. SLOVENIAN FACTORY. CALL BUTCH AT 336-269-2284 for pricing & delivery (9 months to Slovenian Port 11-24-22).

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

Call for Price

MUST BE ORDERED. NEW MEBOR Debarker Model SLH-1200 with butt-end reducing unit. Maximum log diameter 50" x 16' logs x 30,000 lbs. Includes: 6 sets of heavy duty log rotation wheels-variable speed; variable speed debarking feed; log kickers; 40" long butt reducing head with knives and powered by 30 HP electric motor; automatic remote control of machine; longitudinal log rollers for positioning log on the carriage to work with butt-reducing head; 3 strand log deck with stop and loader; 2 heavy duty box frames to receive debarked logs. MACHINERY IS F.O.B.SLOVENIAN FACTORY. Call for current pricing & delivery (6 month delivery to Port 3/27/21). (336) 269-2284.

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved